VEVOR RLLT2-E TV Wall Mounts User Manual
- May 15, 2024
- VEVOR
Table of Contents
Technical Support and E-Warranty
Certificatewww.vevor.com/support
TV WALL MOUNTS
USER MANUAL
MODEL:RLLT2-E
RLLT2-E TV Wall Mounts
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands. NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
CustomerService@vevor.com
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
SAFETY INSTRUCTIONS
WARNING:
Read this material before using this product. Failure to do so can result in
serious injury.
Assembly precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting the TV Wall Mounts.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
Use precautions
- This product is designed for use in wood stud and solid concrete wall. -Do not mount on dry wall alone.
- Do not exceed the maximum weight capacity of this product.
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Do not use this product for any purpose not explicitly specified by manufacture.
- Inspect before every use; do not use if parts are loose or damaged.
- Manufacture is not responsible for damage or injury caused by incorrect assembly or use.
SAVE THIS MANUAL
TOOLS NEEDED
HARDWARE INCLUDED
ASSEMBLY STEP
STEP1 Attach Brackets to TV
STEP 1-1 Measure TV Hole Pattern Note: VESA=Hporizontal x Vertical
(Max VESA:600 x 400mm)
100mm ≈ 4 in
200mm ≈ 7 7/8 in
300mm ≈ 11 3/4 in
400mm ≈ 23 5/8 in
STEP 1-2 Select TV Screws
Preparation: Check VESA pattern of TV beforeinstallation.
Only one screw size fits your TV.
STEP 1-3 Assemble Wall Plate
STEP 1-4 Attach the TV Brackets
STEP 1-4 Attach the TV
Brackets
STEP 2
Attach Wall Plate to Wall
STEP 2A Wood Stud Installation
STEP 2B Solid Concrete Wall Installation
Caution: These anchors are for solid concrete and concrete block walls ONLY
DO NOT use them in drywall or wood studs.
STEP 3 Hang and Secure TV to Wall Plate
STEP4
Adjustments
STEP 4-1 Tilting angle adjustments (+1°/-8°)
STEP 5 Take down the TV from the
Mount
PRODUCT PARAMETER
| Model | RLLT2-E |
|---|---|
| Safe Loading Weight | 60 kg |
| Product Size | 66021025 mm |
| Net Weight | 2.13 kg |
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS : SIHAO PTY LTD, 1 ROKEVASTREETEASTWOOD NSW 2122
Australia
Imported to USA: Sanven Technology Ltd.Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
SHUNSHUN GmbH
Römeräcker 9 Z2021,76351
Linkenheim-Hochstetten,Germany
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom
Made In China
Technical Support and E-Warranty Certificate
www.vevor.com/support