Westinghouse WFE512 Slot In Upright Range Cooker User Manual Product Information
- May 15, 2024
- Westinghouse
Table of Contents
- WFE512 Slot In Upright Range Cooker
- Product Information
- Specifications
- Product Usage Instructions
- Congratulations on Your Purchase!
- Installation and Safety
- Conditions of Use
- Symbol Meanings
- Important Information
- Q: Where can I find the Product Registration QR code?
- Q: What should I do if I encounter appliance damage?
- Q: Can I use this appliance for commercial purposes?
WFE512 Slot In Upright Range Cooker
Product Information
Specifications
-
Model: WFE512, WFE542, WFE614, WFE612, WFE642, WFG612, WFE532,
WFE616, WFE646 -
Size: 540mm and 600mm slot-in upright range cooker
-
Compliance: Australian Standard AS/NZ 60335.2.6, AS/NZS
5263.1.1 for gas appliances
Product Usage Instructions
Congratulations on Your Purchase!
Thank you for choosing our cooker. Before using the appliance,
please read the user manual thoroughly to understand its functions
and ensure safe operation.
Installation and Safety
Proper installation is crucial for safe use. Make sure to follow
the safety instructions provided in the manual to prevent misuse
and hazards. Store this booklet for future reference.
Conditions of Use
This appliance is designed for household use. Record the model
and serial numbers for reference. Refer to the user manual for
detailed instructions.
Symbol Meanings
-
WARNING: Personal safety information
-
CAUTION: Instructions to avoid appliance
damage -
TIPS AND INFORMATION: Useful tips for
appliance use -
ENVIRONMENT: Tips for economical and
ecological use
Important Information
If you notice any damage or marks on the appliance, report it
within 7 days for warranty claims. Dispose of materials responsibly
through recycling facilities.
Frequently Asked Questions (FAQ)
Q: Where can I find the Product Registration QR code?
A: The QR code is located on the front of your appliance or
inside the door rim. Use your smartphone camera app to scan it for
registration.
Q: What should I do if I encounter appliance damage?
A: Report any damage within 7 days to claim under the
manufacturer’s warranty. Refer to the user manual for details.
Q: Can I use this appliance for commercial purposes?
A: This appliance is intended for household use. Commercial use
may void the warranty and pose safety risks.
USER MANUAL
Enjoy peace of mind. Register your appliance today.
Stay updated on better living services, safety notices and shop for
accessories. 1. Open the camera app on your smartphone and
point at the QR code to scan Product Registration QR code is located on the
front of your appliance or inside the door rim.
2. Tap the notification or link to open the registration form 3. Complete
your details and enjoy peace of mind Exact location of QR code may vary
depending on oven model
540MM AND 600MM SLOT-IN UPRIGHT RANGE COOKER
WFE512, WFE542, WFE614, WFE612 WFE642, WFG612, WFE532, WFE616, WFE646
CONGRATULATIONS
CONTENTS
Congratulations and thank you for choosing our cooker. We are sure you will
find your new appliance a pleasure to use and a great asset to your cooking.
Before you use the appliance, we recommend that you read through the whole
user manual which provides a description of the product and its functions.
To avoid the risks that are always present when an appliance is used, it is
important that the appliance is installed correctly and that you read the
safety instructions carefully to avoid misuse and hazards. For future
reference, please store this booklet in a safe place.
This appliance complies with the requirements of Australian Standard AS/NZ
60335.2.6. Gas appliances also comply with the requirements of AS/NZS
5263.1.1.
Conditions of Use
This appliance is intended to be used in household and similar applications
such as:
· Staff kitchen areas in shops, offices and other working environments
· Farm houses
· By clients in hotels, motels and other residential type environments
· Bed and breakfast type environments
Record model and serial number here:
Important safety instructions………………………………………………..3 Description of your appliance……………………………………………… 4 Installing the appliance …………………………………………………………. 6 Wiring requirements………………………………………………………………. 9 Connecting to services and commissioning ……………………. 9 Connections ……………………………………………………………………………..10 Testing the operation of the gas cooker ………………………… 12 Before operating your appliance for the first time……….. 13 Installing your oven accessories …………………………………………14 Using the hotplate …………………………………………………………………. 15 Operating for the first time ………………………………………………….16 Using the gas cooker ……………………………………………………………. 17 General hints and tips ……………………………………………………………19 Guide to better grilling …………………………………………………………20 Operating the 120 minute mechanical ringer timer ……… 21 Using the oven……………………………………………………………………….. 22 AirFry cooking………………………………………………………………………..23 Oven guide………………………………………………………………………………24 Get to know your new oven………………………………………………..25 Dealing with cooking problems …………………………………………26 Cleaning the cooker……………………………………………………………… 27 Cleaning your oven accessories…………………………………………28 Cleaning and caring for the oven………………………………………29 Solving problems …………………………………………………………………… 31 Removing the oven door……………………………………………………..32 LPG conversion ………………………………………………………………………34 Warranty …………………………………………………………………………………..36 Notes………………………………………………………………………………………… 37
Model number:…………………………………………………………………………….
Serial number: ……………………………………………………………………………..
Please read the user manual carefully and store in a handy place for later
reference. The symbols you will see in this booklet have these meanings:
WARNING
This symbol indicates information concerning your personal safety
CAUTION
This symbol indicates information on how to avoid damaging the appliance
TIPS AND INFORMATION
This symbol indicates tips and information about use of the appliance
ENVIRONMENT
This symbol indicates tips and information about economical and ecological use
of the appliance
TIPS AND INFORMATION
Important CHECK FOR ANY DAMAGE OR MARKS
If you find the appliance is damaged or marked, you must report it within 7
days if you wish to claim for damage/ marks under the manufacturer’s warranty.
This does not affect your statutory rights.
ENVIRONMENT
Information on disposal for users · Most of the packing materials are
recyclable.
Please dispose of those materials through your local recycling depot or by
placing them in appropriate collection containers.
· If you wish to discard this product, please contact your local authorities
and ask for the correct method of disposal.
IMPORTANT INFORMATION THAT MAY IMPACT YOUR MANUFACTURER’S WARRANTY
Adherence to the directions for use in this manual is extremely important for
health and safety. Failure to strictly adhere to the requirements in this
manual may result in personal injury, property damage and affect your ability
to make a claim under the Westinghouse manufacturer’s warranty provided with
your product. Products must be used, installed and operated in accordance with
this manual. You may not be able to claim on the Westinghouse manufacturer’s
warranty in the event that your product fault is due to failure to adhere this
manual.
2
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
WARNING
· This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
· Children should be supervised to ensure that they do not play with the
appliance.
· During use, this appliance becomes hot. Care should be taken to avoid
touching hot surfaces, e.g. oven door, heating elements or internal surfaces
of the oven.
· This appliance must not be used as a space heater.
· In order to avoid a fire, the appliance must be kept clean and vents kept
unobstructed.
· Do not spray aerosols in the vicinity of the appliance during operation.
· Do not use or store flammable materials in or under the appliance, e.g.
Aerosols.
· Accessible parts will become hot when in use. To avoid burns and scalds
children should be kept away.
· Always use gloves when handling hot items inside grill or oven.
· Do not modify this appliance.
· The appliance is not intended to be operated by means of an external timer
or separate remote control system.
· Do not store items on the cooking surfaces. This may result in a fire.
· Accessible parts may become hot during use. Young children should be kept
away.
· The cooking process has to be supervised. A short term cooking process has
to be supervised continuously.
· Unattended cooking on a hob with fat or oil can be dangerous and may result
in a fire.
· The appliance must not be installed behind a decorative door in order to
avoid overheating.
Grill
· Always turn the grill off immediately after use as fat left there may catch
fire.
· Always keep the grill dish clean as any fat left may catch fire.
· Do not leave the grill on unattended.
· To avoid a fire, ensure that grill trays and fittings are always inserted
into the appliance in accordance with the instructions.
· Do not place thick portions of food under the grill. Foods may curl, catch
and ignite.
· Accessible parts may become hot when grill is in use. Children should be
kept away.
Oven
· During use the appliance becomes hot. Care should be taken to avoid touching
the hot surfaces inside the oven.
· Switch the appliance off before removing the oven light glass for globe
replacement.
· To avoid an accident, ensure that oven shelves and fittings are always
inserted into the appliance in accordance with the instructions.
· Do not use the door as a shelf.
· Do not push down on the open oven door.
Installation, cleaning and servicing
· An authorised person must install this appliance. (Certificate of Compliance
to be retained)
· Before using the appliance, ensure that all packing materials are removed
from the appliance.
· In order to avoid any potential hazard, the enclosed installation
instructions must be followed.
· Ensure that all specified appliance vents, openings and airspaces are not
blocked.
· Where the appliance is built into a cabinet, the cabinet material must be
capable of withstanding 85°C.
· Only authorised personnel should carry out servicing. (Certificate of
Compliance to be retained)
· Always ensure the appliance is switched off before cleaning or replacing
parts.
· Do not use steam cleaners, as this may cause moisture build up.
· Always clean the appliance immediately after any food spillage.
· To maintain safe operation, it is recommended that the product be inspected
every five years by an authorised service person.
· If rigid gas pipe is used for installation it should include sufficient
loops to allow the appliance to be removed from installed position without the
need to disconnect the piping.
· This appliance must be earthed
· For appliances supplied with a supply cord, if the supply cord is damaged,
it must be replaced by the manufacturer or its service agent or similarly
qualified person in order to avoid a hazard.
CAUTION
· Do not line the bottom of the oven or grill with foil or cookware.
· Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven
door glass since they can scratch the surface, which may result in shattering
of the glass.
IMPORTANT SAFETY INSTRUCTIONS
3
DESCRIPTION OF YOUR APPLIANCE
Model WFE512
Grill indicator Oven indicator
lamp
lamp
Hotplate controls
Model WFE542
Grill
Oven
temperature temperature
selector
selector
2 hour timer
Grill indicator Oven indicator
lamp
lamp
Dual ring hotplate control
Hotplate controls
Model WFE614
Hotplate controls
Model WFE612
Grill
Oven
2 hour
temperature temperature timer
selector
selector
Grill/Oven indicator lamp
Grill
Grill/Oven selector
Grill/Oven 2 hour temperature timer selector
Grill indicator Oven indicator
lamp
lamp
Hotplate controls
4
DESCRIPTION
Grill
Oven
temperature temperature
selector
selector
2 hour timer
Model WFE642
Dual ring
Hotplate
hotplate control controls
Model WFG612
Oven fan button
Grill indicator Oven indicator
lamp
lamp
Grill temperature selector
Oven temperature selector
2 hour timer
Oven light button
Hotplate controls
Model WFE616
Grill
temperature 2 hour
selector
timer
Hotplate controls
Oven temperature selector
Ignition button
Oven indicator lamp
Hotplate controls
Model WFE532
Function Selector
Grill/Oven temperature selector
Grill indicator Oven indicator
lamp
lamp
2 hour timer 1 hour timer
Model WFE646
Hotplate controls
Hotplate controls
Oven temperature selector
Oven indicator lamp
Function Selector
Grill/Oven temperature selector
2 hour timer
DESCRIPTION
5
INSTALLING THE APPLIANCE
(600mm wide product)
Cabinet requirements
Recommended cabinet design
This appliance has been designed to `slot-in’ to a 600mm wide gap built-in
standard kitchen cabinets. As such the appliance can be installed to suit the
height of the benches
This allows the cooker to integrate well into contemporary kitchens. The
cooker may also be installed at the end of a line of benches or with a free
space on either side.
· Electric hob models must not be installed in a corner; they must be
installed at least 100mm from the side wall. Gas hob models must be installed
with a minimum clearance of 100mm to side walls made of unprotected
combustible materials.
· For gas models refer to section 6.10.1 in AS/NZS 5601.1 for all relevant
clearances.
630mm
600mm
Clearance to side wall (refer notes)
600mm minimum
900mm (NOM)
720mm (NOM)
WARNING
This appliance has been tested and approved to the relevant Australian
Standards. It is designed to cook food, it will get hot. Cabinet materials
must be capable of withstanding 85oC. Installation into lower temperature
tolerant cabinetry (e.g. vinyl coated) may result in deterioration of the low
temperature coating by discolour or bubbling.
Electrolux Home Products cannot accept responsibility for damage caused by
installation into low temperature tolerant cabinets.
596mm minimum
910mm minimum anti-tilt plate
1.25m electrical service cord (if fitted)
Installation and service warning
WARNING
· Only an authorised person must install and service this appliance
(Certificate of Compliance to be retained).
· In order to avoid a hazard, the installation instructions MUST be followed.
· In order to avoid the appliance tipping, the anti-tilt plate MUST be
installed.
· Appliances requiring connection to 230 240V MUST be earthed.
· An authorised person should inspect this appliance every 5 years.
· This appliance must NOT be installed on a base, box or in a closed cupboard.
· If the electrical supply cord is damaged, a qualified person MUST replace
the cord to avoid a hazard or void your warranty.
· The unit must be pushed up against the wall on installation. On gas units
check that the gas hose, if used, has not been kinked during installation.
Preparing for installation
1. Check that the required services are correctly positioned (see electrical
and gas services requirements section and cabinet requirements section).
2. Ensure that cabinetry has correct details (see cabinet requirements
section).
3. Unpack the cooker.
4. Remove the foam pack containing accessories.
5. Remove the internal pack from the oven and position shelf supports and
grill trays.
6. Remove the 2 screws for the splashback from the rear panel, and fit it to
the unit with the same screws.
Following table outlines the distance between the floor supporting the product and the surface supporting cooking vessel:
Surface type (supporting vessel) Ceramic Glass Solid Hotplates Cast Trivets
Distance (mm) 910 920 933
6
INSTALLATION
Fitting the anti-tilt plate & stabilising bolt
Cooker Stability
NOTE: To ensure cooker stability, both the anti-tilt plate and stability bolt
MUST be installed on all cookers (electric and gas).
Installation Sequence
1. The cooker is delivered with the anti-tilt plate. Locate the anti-tilt
plate against the rear wall. If locating between 2 cupboards, then fit the
plate in the centre of the space. If locating the cooker at the end of a
cupboard, then position the side of the plate 48mm from the cupboard.
NOTE: If cooker cannot be located against rear wall, move anti-tilt plate
forward to suit.
2. Securely fix the anti-tilt plate to the floor with appropriate fasteners.
3. Slide the cooker back into the anti-tilt plate so that rear cover rests
against the rear wall.
Then check the height and level of the cooker. If required, pull the cooker
back out and adjust the levelling feet as required.
4. Cut the cable tie from the stability bolt.
5. Rotate the stability bolt 180 clockwise until it is pointing to the left
like the picture below.
6. The stability bolt should now be able to drop to the floor.
7. Mark the position for the stability bolt on the floor.
8. Pull the cooker out and drill the bolt hole, using a 6.5mm masonry or wood
drill. Minimum 30mm deep for concrete.
9. Reposition the cooker back into place, then fit the stability bolt into
the drilled hole.
10. Connect gas and electricity supply (refer to pages following).
11. Fit the kick panel onto the cooker.
Stability bolt Kick panel
Installing splashback
Rear cover
48mm to side of plate
5mm clearance Rear adjustable foot
Anti-tilt plate
Front adjustable feet
ø6.5mm drilled location hole
Fit splashback to rear of hob with the two screws provided
INSTALLATION
7
INSTALLING THE APPLIANCE (540mm wide product)
Cabinet Requirements
This appliance has been designed to `slot-in’ to a 550mm wide gap built-in
standard kitchen cabinets. As such the appliance can be installed to suit the
height and depth of benches and behind the kick rail of the cabinets. This
allows the cooker to integrate well into contemporary kitchens. The cooker may
also be installed at the end of a line of benches or with a free space on
either side.
· Electric hob models must not be installed in a corner; they must be
installed at least 100mm from the side wall. Gas hob models must be installed
with a minimum clearance of 100mm to side walls made of unprotected
combustible materials.
· For gas models refer to section 6.10.1 in AS/NZS 5601.1 for all relevant
clearances.
Position anti-tilt plate to the rear wall and 25mm from side of cupboard.
Securely fix anti-tilt plate to the floor with fasteners. Adjust levelling
feet on cooker as required. Stabilising bolt
Stability bolt
Kick panel
6.5mm DIA drilled location hole
Front adjustable feet
Clearance to side wall (refer notes)
600mm min. to combustible material
550mm minimum
910mm 540mm
Anti-tilt plate
630mm
1.25m electrical service cord (if fitted)
WARNING
In order to avoid accidental tipping of the appliance (for example, by a child
climbing onto the open oven door), the anti-tilt plate and stabilising bolt
MUST be installed.
Remove oven door – to be done by qualified personnel only. (Refer to
procedure).
2. Remove screws from kick panel. To remove kick panel lift kick panel
upwards to release the two location tabs from the holes in the bottom of the
panel.
3. Position cooker into the ant-tilt plate and then mark the position for the
stability bolt hole on the floor.
4. Pull cooker out and drill the bolt hole, using a 6.5mm masonry or wood
drill bit. The bolt hole needs to be a minimum of 30mm deep when fixing the
oven to concrete.
5. Reposition cooker back into place and fit the stability bolt through the
slot and into the drilled hole.
6. If the cooker is placed on a base, measures must be taken to prevent the
appliance slipping from the base.
WARNING
For your safety this cooker is designed to be moved out of position by a
qualified person only.
Installing Splashback
Rear cover
8
INSTALLATION
25mm to side of plate
5mm clearance Rear adjustable foot
Anti-tilt plate
Fit splashback to rear of hob with the two screws provided
WIRING REQUIREMENTS
The cooker MUST be installed in compliance with:
· Wiring connections in AS/NZS 3000 Wiring Rules
· Local regulations, municipal building codes and other statutory regulations
· For New Zealand Only: The cooking range must be connected to the supply by a
supply cord fitted with the appropriately rated plug that is compatible with
the socket-outlet fitted to the final sub-circuit in the fixed wiring that is
intended to supply this cooking range.
Data plate
gives information about rating
is located behind the bottom of the oven door
· A functional switch operating in all active conductors MUST be provided near
the appliance in an accessible position (AS/NZS 3000 – Clause 4.7.1).
· Wiring MUST be protected against mechanical failure (AS/NZS 3000 – Clause
3.9).
· Disconnection in the fixed wiring must occur in accordance with the AS/NZS
3000 wiring rules.
· The cooker MUST be properly earthed.
· This range must be connected with cable of 75°C rating minimum.
· This product has passed the insulation resistance test after manufacture. If
the resistance reading is low at installation, it is probably caused by
moisture from the atmosphere being absorbed by the elements after the range
has been produced. (Pass at 0.01M AS/NZS 3000 Wiring Rules Clause 8.3.6.3).
NOTE: When connections are made to a multi-phase 230/240V supply, the bridge
piece MUST be removed from between the active connections.
CONNECTING TO SERVICES AND COMMISSIONING
This appliance must be installed by an authorised person, according to all
codes and regulations of: · Electrical supply authorities. · Building
regulations. · Local government and council authorities. · AS/NZS 5601.1
(particular attention to clause 6.10.1,
figure 6.3 and clause 6.10.1.11). · AS/NZS 3000 (particular attention to
clause 4.7.1
and clause 3.9).
Electrical supply connection · WFE612, WFE616 and WFE512 models are fitted
with
a 20-Amp service cord. · WFE614 and WFG612 models are fitted with
a 10-Amp service cord.
Hard wiring detail (WFE547, WFE646 and WFE647 models only) 1. Remove terminal
cover plate from rear panel
of appliance. 2. Fit wires through hole in cover plate and make
connections to terminals. 3. Engage wires into plastic clip. Secure plastic
clip with
two long silver screws (supplied in separate bag). 4. Replace cover plate onto
rear panel.
Plastic clips
TIPS AND INFORMATION
Before you cook in your new oven it is important that the protective oils used
in the manufacture of the product be removed.
· Make sure that the room is well ventilated (to allow smoke to escape).
· New appliances can have an odour during first use. It is recommended to `run
in’ the oven before cooking for the first time Operate the oven(s), empty, at
a temperature of 180°C for approximately 30 minutes. For appliances with a
separate grill, run the grill on maximum for 15 minutes WITH GRILL DOOR OPEN
Please ensure that the room is well ventilated during this process.
MODEL
TOTAL WATTAGE (KW)
TOTAL CURRENT (AMPS)
CABLE SECTION (MM2)
MINIMUM TEMP. RATING (°C)
RATED POWER INPUT
MODEL WFE542 WFE642 WFE532 WFE646
TOTAL KW 10.5 10.5 10.04 9.4
A1 KW 4.1 4.1
4.04 3.4
WFE642 10.5 WFE542 10.5 WFE532 10.5
43.8
4.0
75
43.8
4.0
75
43.8
4.0
75
Plastic clip securing points
A2 KW 6.4 6.4 6.0 6.0
WIRING REQUIREMENTS
9
CONNECTIONS
Wiring connection for gas cooker
To allow for disconnection of the appliance after installation, the plug must
be accessible after installation.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Operation on SNG (WFG612 models only)
· If the cooker is to be used with SNG, then the grill burner MUST be modified
by the replacement of the shutter, which fits into the throat of the grill
burner.
· A conversion kit can be obtained by contacting the Customer Care Centre.
Installing the gas cooker gas connection
Read these points before connecting to the gas supply:
· The cooker inlet connection point has a ½” BSP external thread. See diagram
below.
· An NG regulator or a LPG/Propane test point fitting is supplied.
· It is recommended to fit the regulator or test point fitting to the
appliance connection point, then fit either hard piping or a high level
flexible connection (AS/NZS 5601.1 clauses 5.9 and 6.10.1.9) which is then
attached to the consumer hard piping.
· Ensure installation allows withdrawal of appliance.
Grill deflector
Restraining device anchor points
Gas connection point
175mm
650mm
Grill shutter
WARNING
Disconnect electric power before removing control panel. 1. Remove the control
panel. 2. Remove the 2 screws from grill deflector (refer to
diagram above) 3. Remove the existing NG shutter securing screw (refer
to diagram above) and slide upwards to disengage from grill burner. 4. Slide
the SNG shutter into position and secure with screws.
Operation on universal LPG/propane
1. The appliance inlet fitting provided MUST be orientated so that the
pressure nipple is accessible.
2. The inlet fitting has ½” BSP internal thread at the inlet and outlet.
Testing the gas cooker
WARNING
You MUST test the cooker after installation, before you hand it over to the
customer. You MUST have a manometer and a connecting tube.
10 CONNECTIONS
Gas requirements
This appliance must be installed by an authorised person, according to all
codes and regulations of:
AS/NZS 5601.1 (particular attention to clause 6.10.1, figure 6.3, and clause
6.10.1.11.)
· The cooker models WFE512, WFE614, WFE612 and WFE616 come in two gas types
Natural gas and Universal LPG.
· Model WFG612SC comes in two gas types Natural Gas and Propane. Model
WFG612WC only comes in Natural Gas.
Before installation check that the cooker is suitable for the gas supply. To
do this check the gas type on the carton sticker or on the data plate behind
the bottom of the oven door. The following table shows the supply and
operating pressures for various gas supplies.
GAS TYPE
Supply pressure at inlet to appliance regulator (if fitted)
NATURAL UNIVERSAL PROPANE
GAS
LPG
1.13kPa
2.75*kPa
minimum
2.75*kPa
Operating pressure at appliance test point for WFG612
1.00kPa
Operating pressure at appliance test point for WFE512, WFE614, WFE612 & WFE616
1.00kPa
2.60kPa
2.75kPa
*Some models do not require an appliance regulator for LPG or Propane operation, in which case the supply pressure and operating pressure are the same. In such cases the supply pressure is adjusted at a regulator in the consumer piping, typically located at the cylinder.
Models WFE512, WFE614, WFE612 & WFE616
The following table shows the injector sizes for each burner.
INJECTOR ORIFICE
NATURAL UNIVERSAL
GAS
LPG
Low heat burner
1.00mm
0.55mm
Medium heat burner
1.35mm
0.70mm
High heat burner
1.60mm
0.90mm
Intense heat wok burner
1.75mm
1.00mm
Models WFG612
The following table shows the injector sizes for each burner.
INJECTOR ORIFICE
Low heat burner Medium heat burner High heat burner Intense heat wok burner
Oven main injector Grill Oven bypass screw
NATURAL PROPANE GAS 1.00mm 0.62mm 1.35mm 0.82mm 1.60mm 0.95mm 1.75mm 1.00mm 1.60mm 0.95mm 1.50mm 0.82mm 0.73mm 0.45mm
Checking pipe size To work out a suitable pipe size for connection use:
· The information in this table.
GAS TYPE
NATURAL UNIVERSAL PROPANE
GAS
LPG
Hourly gas
63.3MJ/h
consumption for
WFG612
61.5MJ/h
Hourly gas consumption for WFE614, WFE612 & WFE616
40.4MJ/h 34.4MJ/h
Hourly gas
37.3MJ/h 30.2MJ/h
consumption for
WFE512
· Information about the length of the run, number of elbows, tees and bends, the available service pressure and the supply requirements, AS/NZS 5601.1 will help you with this matter.
CONNECTIONS
11
TESTING THE OPERATION OF THE GAS COOKER
NOTE: You MUST test the cooker after installation, before you hand it over to
the customer.
You MUST have a manometer and a connecting tube.
Checking gas supply
1. Check the manometer zero point is correct.
2. Connect the manometer to the cooker pressure test point. This is located
on the regulator or LPG/ Propane inlet fitting.
3. Turn on the gas supply and the electricity and try to ignite the gas.
NOTE: It will take additional time to light the gas for the first time as air
needs to be purged from the pipes.
4. Check the operating pressure for the particular gas type. For details, see
“Connections” on page 11.
NOTE: For LPG/Propane cookers: Adjust the regulator if necessary (this may be
remote from the cooker).
For Natural Gas cookers
Regulators are supplied pre-adjusted and configured by the component maker for
use with Natural Gas. The appliance installer is not required to make an
adjustment to obtain the correct outlet pressure setting.
An arrow on the base of the regulator indicates the direction of gas flow when
the inlet and outlet of the regulator are orientated correctly. When the
regulator has been fitted check for leaks from the connections with soapy
water.
Checking the Function of the Regulator
With the appliance operating check the outlet pressure:
· When all burners of the appliance are operating at maximum,
· When the smallest burner of the appliance is operating at minimum.
Under these conditions the outlet pressure should not vary from the nominal
outlet pressure by more than ±20% of the nominal outlet pressure (ie ±0.20kPa
for Natural Gas).
If the regulator appears to not be performing satisfactorily then check the
following points.
1. If the outlet pressure is consistently too low then the inlet pressure may
be too low and adjustment of an upstream regulator may be needed, or an
upstream regulator or valve with insufficient flow capacity may be present in
the gas supply line. If this is suspected then it may be necessary to repeat
the checks whilst measuring both the inlet and outlet pressure to determine if
the inlet pressure is in the range 1.13 5kPa.
2. Check that the regulator has been fitted to the gas supply line in the
correct orientation, the arrow on the base of the body indicates the direction
of gas flow.
Once these checks have been completed, if the regulator still fails to perform
in a satisfactory manner it should be replaced.
Testing the cooker features
· Observe the flame appearance on each burner. If it is much smaller or larger
than expected, then the injector size needs checking.
NOTE: When flame is unsatisfactory, then refer to the Electrolux Technical
Publications and correct the fault, if possible.
When maximum flame appearance is correct, then check the turn-down setting on
each burner. If the settings appear to be incorrect, proceed as follows:
1. Adjust the bypass screw mounted on the body of each hotplate control cock.
This is accessible when the control knob is removed.
2. Check the ignition on all burners both separately and in combination.
3. Check the operation of the electrical components, if applicable.
4. If you are satisfied that the cooker is operating correctly, then turn it
off and show the customer how to use it. Make sure you ask the customer to
operate the controls.
NOTE: If the cooker cannot be adjusted to perform correctly, then inform the
customer of the problem and put a warning notice on the cooker. If the problem
is dangerous, then disconnect the cooker. If there is a fault, then the
customer should be advised to contact the manufacturer’s local service
organisation or the retailer.
12
TESTING
BEFORE OPERATING YOUR APPLIANCE FOR THE FIRST TIME
Preparing your appliance for the first time
· Please remove all internal boxes and bags from the oven before operation.
· Please wipe out the oven interior prior to operation with warm soapy water
and polish dry with a soft clean cloth. Do not close the oven door until the
oven is completely dry.
CAUTION
· Do not line the oven with foil as it will damage the enamel.
· New appliances can have an odour during first use. It is recommended to `run
in’ the oven before cooking for the first time Operate the oven(s), empty, at
a temperature of 180°C for approximately 30 minutes. For appliances with a
separate grill, run the grill on maximum for 15 minutes WITH GRILL DOOR OPEN
Please ensure that the room is well ventilated during this process.
Installing your oven accessories
Fitting the grill dish (WFE532 only) Separate Grill: Ensure rear of the dish
is engaged with the side support before sliding backwards. To remove, simply
pull forwards and upwards. To ensure proper grill operation, slide the grill
dish fully rearward to the stop. To remove, simply pull forwards and upwards.
Engagement of rear of dish
Air Fry (For WFE616 and WFE646 only) The Air Fry fits into the oven supports
(side runners) just as shelves
Fitting oven shelves
1. Ensure shelf orientation is correct (refer to diagram below).
2. Slide oven shelves onto oven supports (side runners) at an angle until
raised back of shelf is past the stop on oven supports (side runners).
3. Lower front of shelf and push in until stop is reached.
4. To remove oven shelves, withdraw to the stop and raise the front of shelf
to clear the stop.
Grill in oven
(refer to Fitting Oven Shelves) The grill dish with wire insert can be used in
any of the two upper height positions (shelf positions 4 and 5) between the
runners.
NOTE: You must remove the grill dish when baking in the oven.
Note the orientation of the side and rear features
Grill dish insertion
Grill dish final position
BEFORE OPERATING 13
BEFORE OPERATING YOUR
INSTALLING YOUR OVEN
APPLIANCE FOR THE FIRST TIME ACCESSORIES
Oven shelf location
Not a shelf position
5 4 3 2 1
Burner crowns and caps
· The burner crown must be fitted correctly into the burner cup or damage will
occur during operation.
· To do this, ensure that the 2 ribs on either side of the spark plug hole are
positioned into the 2 slots on the burner cup (see diagram).
· Burner cap and burner crown must be clean and located correctly for the
burner to light.
NOTE: When the burner is correctly fitted it will sit level on the hob.
5 shelf positions
burner crown
NOTE: The top ledge is not a shelf position. There are no stops for shelf
withdrawal.
Separate grill
· To insert the grill tray in a separate grill underbench product, open the
grill door and fully extend the grill drawer Position the grill tray so that
the slots on the outer edges fit over the tabs on the slides.
burner cup
Rear slot Slide tab
Trivets · Take care when placing the trivets as dropping them
may damage the hob or trivet.
trivets
burner cap
wok burner
burner crown
14
INSTALLING YOUR OVEN ACCESSORIES
USING THE HOTPLATE
Hotplate dos and don’t’s
· Do not place heat resistant mats, wire mats or aluminium foil under pots and
pans.
· Do not allow pots and pans to boil dry, as damage to both pan and hotplate
may result.
· Do not use the hotplate as extra bench space or as a cutting board.
· Do not allow children on or near the cooktop at any time.
· Do not allow large cookware to overhang the hotplate onto the adjacent
benchtop. This will cause scorching to the benchtop surface.
· Do not use round bottom woks or similar utensils which could lead to
overheating of the hotplates and possible damage to the cooking surface.
· Use the stored heat in the hotplate by turning the control to off before the
final few minutes of cooking.
· Do not slide pans across the surface of the ceramic glass as it could result
in scratching of the surface.
Ceramic hotplates
The cooktop is made from ceramic glass, a tough, durable material that
withstands heating and cooling without breaking. It is strong enough to hold
the heaviest utensils. However, it must be remembered that as it is GLASS, it
may break. Treat it accordingly! Should you have any questions about the glass
in your new appliance, please contact the service centre by dialling 13 13 49
(Australia) or 0800 436 245 (New Zealand).
The heating elements are concealed under the smooth glass surface which has a
pattern to show the location of the elements. When cooking, turn the control
to the required setting. The ceramic cooktop glass will retain heat for a
period of time after the control is turned off. This will be indicated by the
hot surface warning light which will continue to glow until the temperature
drops below 60°C. NOTE: If the ceramic glass is cracked switch off the
appliance to avoid the possibility of electric shock. · Use pans with smooth,
clean and dry bottoms to
avoid scratching or burning residue into the glass. · Ensure the pan bottom is
the same size as the
working element. · We do not recommend ceramic glass pans because
they do not conduct heat well. · Stainless steel or enamelled saucepans are
best. · Do not use pans with copper or aluminium bottoms
because they can leave traces which are difficult to remove from the glass. ·
If buying new utensils select enamelled steel pans with 2-3mm thick bottoms or
stainless steel pans with sandwich bottoms 4-6mm thick. The pan bottom should
be flat, or preferably, slightly concave at room temperature so that it lies
flat on the glass surface when hot.
a flat or slightly concave pan is preferable for ceramic hotplates
USING THE HOTPLATE 15
OPERATING FOR THE FIRST TIME
Choosing utensils for electric hotplates Refer to the diagram below.
Good
Choosing utensils for gas hotplates Refer to the diagram below.
Good
Bad (recessed base)
Bad (convex base)
Bad (undersize)
Bad (oversize)
Bad (undersize)
Bad (oversize)
Bad (moisture on hotplate)
Bad (no cookware)
Do not use utensils which are too large or too small.
Installation and service warning
WARNING
· Only an authorised person must install and service this appliance
(Certificate of Compliance to be retained).
· In order to avoid a hazard, the installation instructions MUST be followed.
· In order to avoid the appliance tipping, the anti-tilt plate MUST be
installed.
· Appliances requiring connection to 230 240V MUST be earthed.
· An authorised person should inspect this appliance every 5 years.
· This appliance must NOT be installed on a base, box or in a closed cupboard.
· If the electrical supply cord is damaged, a qualified person MUST replace
the cord to avoid a hazard.
WARNING
Surrounding kitchen cabinets MUST WITHSTAND 85°C.
BEFORE OPERATING FIRST TIME
1. Read all the Warning and Safety information. 2. Remove all internal boxes
and bags from oven. 3. Clean out the oven interior with detergent and warm
water and polish with a soft cloth. DO NOT close oven door until the oven is
completely dry.
16
OPERATING FOR THE FIRST TIME
USING THE GAS COOKER
Gas hotplate Ensure burner caps, crowns and trivets are properly assembled.
Burner Cap
Burner Crown
Thermocouple Spark Plug
Burner Cap Spark Plug
Burner Crown
Thermocouple
Gas oven burner flame
From a cold start the oven burner flame will be higher on the left hand-side.
After reaching the set temperature, the flame will become even. This does not
affect cooking results.
Lighting gas hotplate, grill and oven
Electronic ignition (For models WFE614, WFE612, WFE616 and WFE512)
These hobs are fitted with mains powered electronic ignition. When the
appliance has been connected and the power is on, depressing any knob will
release sparks to all burners. To light a burner, depress the corresponding
knob and while continuing to depress knob turn anticlockwise to HI’ position. The knob may be released once the flame is established, and turned further anticlockwise to reduce the flame height as desired. Push button Ignition (For models WFG612) Turn appropriate burner control knob to maximum and at the same time press the ignition switch. Flame safeguard models (For models WFE614, WFE612, WFG612, WFE512) Models with flame safeguard have the same ignition procedure as above but require the knob to continue to be depressed after flame is established for approximately 5 seconds. If the flame goes out when the knob is released, simply depress the knob again, this time holding it down with slightly more force for the same length of time. WARNING · Keep hands clear of burners when lighting. · If burner does not light within 5 seconds, turn knob to
Off’ position, allow gas to disperse, then try lighting again. · Burners MUST
be operated between HIGH’ and
LOW’ settings only.
ENVIRONMENT
To conserve gas, place the pan centrally over the burner and adjust the flame
so that it does not go past the edge of the cookware.
NOTE: In the absence of electrical power, carry out the ignition directly to
the burner with a hand held ignition source.
Grill ignition (For models WFG612)
Turn Grill Control Knob onto maximum and at the same time press Electronic
Ignition Switch. This burner also has flame failure, so it is required to
depress the knob approximately 5 seconds after the flame is established. If
the flame goes out when the knob is released, simply depress the knob again,
this time holding it down with slightly more force for the same length of
time.
Grill in oven
Grill is electric and is operated by control knob only.
Oven ignition electronic (For model WFG612)
Push and hold Oven Control Knob onto desired temperature and at the same time
press the Electronic Ignition Switch. Hold control knob in for 5 seconds after
ignition.
USING THE COOKER 17
Gas hotplates (Energy rating)
1
2
3
4
1 Medium heat burner (9.0 MJ/h)
Used for normal cooking and simmering with mid size cookware items.
2 High heat burner (12.1 MJ/h)
Used for fast heating with large size cookware items.
3 Intense heat wok burner (14.2 MJ/h)
Used for very fast heating with woks and other large size cookware items.
4 Low heat burner (5.1 MJ/h)
Used for simmering and for use with small cookware items.
NOTE: Energy ratings above are for natural gas (NG) models.
To conserve gas, place the pan centrally over the burner and adjust the flame
so that it does not go past the edge of the cookware.
NOTE: In the absence of electrical power, carry out the ignition directly to
the burner with a hand held ignition source.
18
USING THE COOKER
GENERAL HINTS AND TIPS
General hints
For best baking results preheat oven for 30 minutes.
The material and finish of baking trays and dishes used will affect the way
foods are baked, especially base browning.
· Enamelware, anodised aluminium, dark bakeware or non-stick interiors and
coloured exteriors will assist in maintaining or reducing the baking time and
increase base browning.
· Ovenproof glassware or ceramics are poor conductors of heat. The shiny
surface of aluminium or polished steel utensils and trays also reflects the
heat rather then passing it through to the food being baked.
· Always place dishes in the centre of the shelf to ensure even browning.
· Stand casserole dishes on a baking tray to prevent food from spilling onto
the base of the oven.
· Use ovenproof cookware, which will withstand temperatures of 250°C.
· Use shallow casserole dishes in preference to deeper ones as this shortens
cooking time in the oven.
CAUTION
· DO NOT place dishes, trays or baking pans directly on the oven base as they
become very hot and will crack and craze the oven liner.
· DO NOT use baking trays larger than 30 x 35cm (12 x 14 inches) as they will
restrict the circulation of the heat and may affect cooking performance of the
oven.
CAUTION
· DO NOT place baking trays and oven dishes directly against the grid covering
the fan at the back of the oven.
· DO NOT place oven dishes directly on the oven base.
TIPS AND INFORMATION
Condensation and Steam · During cooking steam may be produced which can
be released when opening the oven door. This is quite normal. · If there is
any build-up of condensation on the oven door it is recommended that it be
carefully wiped away either during or after cooking.
WARNING
Always stand back from heated oven when opening oven door to allow any build-
up of steam or heat to release.
WARNING
Door glass is a tough and durable material designed to withstand heating and
cooling without breaking. However it must be remembered that it is glass and
may break, therefore must be treated with care. If you have any questions
about the glass in the oven please contact the Service Centre on 13 13 49
(Australia) or 0800 436 245 (New Zealand).
Conventional Oven
· The shelf position is critical. The temperature in centre of the oven is the
temperature shown on the oven control knob. Single shelf baking gives optimal
cooking results.
· DO NOT place baking trays, oven dishes or foil directly on the base of oven,
as trapped heat will crack and craze the floor of the oven liner.
Fan Forced
· Make sure shelves are evenly spaced.
· When baking more than one dish in fan forced oven, place dishes centrally on
shelves rather than several dishes on one shelf.
· When the oven is full you may need to allow a slightly longer baking time.
· When using different size trays or cooking different types of food, cooking
times may vary for each dish.
GENERAL HINTS AND TIPS 19
GUIDE TO BETTER GRILLING
CAUTION Using the Grill
Separate Grill Grill In Oven
Grill with door open.
Grill dish must be located on slides. Slides must be fully pushed in while
grilling.
Grill with door closed.
No definite times can be given for grilling because this depends on your own taste and the size of the food. These times should only be used as a guide and remember to turn the food over halfway through the cooking process.
Steak Chops Fish Bacon
15 20 minutes 20 30 minutes 8 10 minutes 4 5 minutes
WARNING
Always clean the grill tray and grill tray insert after every use. Excessive
fat build up may cause a fire.
For separate grill models, the door must be open while grilling. Ensure grill
slides are fully inserted while grilling. Always switch the grill off
immediately after use.
What is grilling?
· The grill directs heat from the heat source in the grill compartment onto
the food.
· This way of cooking traps the juices inside the food and increases the
flavour.
· Grilling is suitable for tender cuts of meat, steak, chops, sausages, fish
and other foods which cook quickly.
As a method of cooking, grilling can be used to:
· Enhance the flavours of vegetables, fish, poultry and meat.
· Seal the surface of the food and retain the natural juices.
This table shows how to grill different types of meat:
Beef Lamb Sausages
You can use tenderloin, rump, sirloin. Brush with oil or melted butter,
especially if the meat is very lean.
You can use loin chops, short loin chops, chump chops, and forequarter chops.
Remove skin or cut at intervals to stop curling. Brush with oil or melted
butter.
Prick sausages to stop skin from bursting.
Poultry
Divide into serving pieces. Brush with oil.
Fish Bacon
Brush with oil or melted butter and lemon juice.
Remove rind. Grill flat.
For better grilling results, follow these easy instructions:
1. Preheat the grill for at least 3 minutes to obtain best results. This will
help to seal the natural juices.
2. Choose only prime cuts of meat or fish. If the cut is less than 5mm thick
it will dry out. If the cut is more than 40mm thick, the outside may burn
whilst the inside remains raw.
3. Do not place aluminium foil under the food as this prevents fats and oils
from draining away, which could result in a fire.
4. Baste the food during cooking with butter, olive oil or marinade. Grilled
food is better if marinated before cooking.
5. Use tongs to turn food as a fork pierces the surface and will let juices
escape.
WARNING
Safety warnings about the grill
· Do not cook food on the bottom of the grill compartment. Always use the
grill dish and grill dish insert.
· Do not place foil under the food on the grill dish insert, as this prevents
fats and oils running away and may cause a fire.
· Always use the grill parts according to instructions.
· Do not put thick pieces of food too near the element. They may curl and
catch fire.
· Always turn the grill off immediately after cooking.
Left-over fat may cause a fire.
· Always clean the grill dish and insert after use. Fat build up may cause a
fire.
· Do not let children play with the grill.
· Do not let children use the grill without adult supervision.
· Do not leave the grill unattended when on.
· Be careful not to touch hot surfaces.
· Do not spray aerosols near the grill, when it is turned on.
· Do not keep flammable materials in or near the grill, eg chemicals,
aerosols, etc.
20 GUIDE TO GRILLING
OPERATING THE 120 MINUTE MECHANICAL RINGER TIMER (WHERE SUPPLIED)
Operating your 120 minute ringer timer To set the timer, simply turn the knob
clockwise to the required number of minutes. Note: For any time below ten
minutes, turn the knob past the thirty minute mark, then turn it back to the
required number of minutes.
120 MINUTE TIMER 21
USING THE OVEN
Fan baking
Cooking guide
The temperature in the oven is controlled by a thermostat. The fan distributes
the heat throughout the oven compartment. This allows:
· Baking on all shelves at the same time with little variation in browning or
cooking.
· Cooking at slightly lower temperatures.
· Cooking from a cold start so there is no need to preheat the oven this is
good for casseroles and fruit cakes.
· Good cooking results for cream mixtures, rich pastries and bread but with
these foods, preheating the oven for 10 to 15 minutes is required.
Defrosting
· Defrosting uses air that is circulated by the fan.
· You should defrost food before cooking it.
· You can also use the defrost function to raise yeast dough and dry fruit,
vegetables and herbs.
Condensation
Condensation fogs the oven door and happens when you are cooking large
quantities of food from a cold start. You can minimise condensation by:
· Keeping the amount of water used in cooking to a minimum;
· Making sure that the oven door is firmly closed;
· Cooking casseroles with a lid.
NOTE: If you are using water in cooking, this will turn to steam and may
condense outside the oven. This is not a problem or a fault.
· Select the correct shelf location for food being cooked.
· The grill tray can be used in the oven as a baking dish.
· Make sure dishes will fit into the oven and remove unnecessary trays or
dishes before you switch it on.
· Keep edges of baking dishes at least 40mm from the side of the oven. This
allows free circulation of heat and ensures even cooking.
· Do not open the oven door more than necessary.
· Do not place foods with a lot of liquid into the oven with other foods. This
will cause food to steam and not brown.
· After the oven is turned off it retains the heat for some time. Use this
heat to finish custards or to dry bread.
· Do not use a lot of cooking oil when roasting. This will prevent splattering
oil on the sides of the oven and the oven door. Polyunsaturated fats can leave
residue which is very difficult to remove.
· When cooking things which require a high heat from below (e.g. tarts), place
the cooking dish on a scone tray in the desired shelf position.
· For sponges and cakes use aluminium, bright finished or non-stick utensils.
Oven shelf location
Your oven comes with formed “easy clean” runners that allow five positions for
shelves These are numbered from
1 (the lowest shelf position) to 5 (the highest shelf position). See diagram.
To give maximum space above and below the shelves, load them in this way:
· When cooking with 1 shelf, use position 3.
· When cooking with 2 shelves, use positions 2 and 4.
Not a shelf position
5 4 3 2 1
5 shelf positions
22 USING THE OVEN
AIR FRY COOKING (FOR APPLICABLE MODELS ONLY)
Air Fry Cooking (for applicable models only)
The Air Fry feature works best for single shelf baking. Air Fry is suitable
for French Fries, Chicken Wings, Chicken Nuggets and similar products, See
settings in the table below.
FOOD
TEMP °C SHELF
TIME IN
POSITION* MINUTES
Scotch fillet steak, 220 seared first
2 or 3
8-12 (rare/ med)
Frozen chips
220
2 or 3
15-20
Important:
Chicken
220
3
· Air Fry is designed for single shelf cooking.
· Food should be arranged in a single layer on the Air Fry Tray.
drumettes/ wingettes with a dry rub
· A separate tray should be placed on the bottom
Fresh Barramundi 220
3
shelf position to catch any fat or crumbs
fillet with crumb
dropping from the Air Fry Tray during cooking.
This tray must be removed for normal baking.
Potatoes cut into 220
3
· Some experimenting may be required to find the wedges
best cooking time.
Frozen goods
220
3
· Food may need to be removed early and should be (Chicken nuggets/
checked at minimum recommended bake time.
crumbed fish)
· Some frozen dense food with cook times less than Smashed chats 220
3
15 minutes may require additional baking time.
parboiled
15-20
15-20 20-25 15-20 15-20
To Set the Air Fry Function:
1. Arrange food on to the Air Fry tray.
2. Select Air Fry setting and suggested temperature from the table below.
3. For best results pre-heat the oven
4. When the oven reaches the set temperature place the Air Fry tray on the
suggested oven shelf position.
- Count shelf position from the bottom up.
A separate tray should be placed on the bottom shelf position to catch any fat or crumbs dropping from the Air Fry Tray during cooking. This tray must be removed for normal baking.
Note: Set the minute minder for the minimum suggested time and check for
desired results when timer ends.
5. When cooking is complete turn the oven off.
6. Clean Air Fry tray after each use. Wash the tray in the sink with warm
soapy water and a stainlesssteel scourer.
IMPORTANT SAFETY INSTRUCTIONS 23
OVEN GUIDE
The following is intended as a guide. Cooking variation is natural and to be expected. You should experiment with times, temperatures and recipes to obtain the best results to your own taste. Get to know your oven before making a service call. Where the gas models vary from the electric models, details for gas cooking is shown in brackets. For best results when baking, preheat your oven for 30 minutes.
FOOD Plain or fruit scones
CONVENTIONAL OVEN
TEMPERATURE OVEN SHELF PO-
0C
SITION*
220
2 (3)
FAN FORCED OVEN
TEMPERATURE OVEN SHELF
0C
POSITION*
210
Any
Rolled biscuits
170 (180)
2
150 (170)
Any
Spooned biscuits
190
2
180
Any
Shortbread biscuits
160
1 or 2
150
Any
Hard individual
110
2
meringues
100
Any
Soft individual
180
2
meringues
165
Any
Pavlova 6 eggs
110 (120)
1
100
Any
Patty cakes
190
2
180
Any
Sponge 4 eggs
180
2
170
Any
Plain butter cake
180
2
170
Any
Rich fruit cake
140 (150)
2
130
Any
Shortcrust cornish pasty#
200 (200/180) 2
Shortcrust custard tart 200/180
1(3)
(220/180)
Cream puffs
210
2
180 (180/160) Any
190/170
Any
(200/180)
200
Any
Yeast bread
210
1
200
Any
Pizza
220
2
220
Any
TIME IN MINUTES
10 15 10 15 12 15 30 35 90
15 20
75 15 20 20 30 25 40 180 40 45 (10/35)
20 30 (10/25)
25 30 25 30 15 25
- Shelf position is counted from the bottom shelf up. Bottom shelf position is 1. # Turn down temperatures shown.
MEAT/POULTRY/FISH Rare
Beef
Medium Well done
Lamb
Veal Pork Chicken Duck
Medium Well done
Turkey
Fish
RECOMMENDED TEMPERATURE 0C 200 200 200 200 200 180 200 180 – 200 180 – 200 180
180
MINUTES PER KILOGRAM 35 – 40 45 – 50 55 – 60
40 60 60 60 45 50 60 70 40 45 (less than 10kg) 35 40 (more than 10kg)
20
24 OVEN GUIDE
Roasting Meat
· You can use the grill tray and grill tray insert for roasting meat in the
oven.
· Place the meat in the oven and set the temperature between 180°C and 200°C.
(It is recommended to wrap your meats in an oven roasting bag or foil to
prevent fats and oils from splattering, making it easier to clean your oven.)
· Do not pierce the meat, as this will allow juices to escape.
· When the meat is cooked, take the roast out of the oven, wrap in aluminum
foil and leave to stand for about 10 minutes. This will help retain the juices
when the meat is carved.
The table shows temperatures and cooking times for different kinds of meat.
These may vary depending on the thickness or bone content of the meat.
MEAT Beef
Lamb Veal Pork
RECOMMENDED TEMPERATURE
MINUTES PER KG
200°C Rare
35 – 40
Medium 45 – 50
Well done 55 – 60
200°C Medium 40
Well done 60
180°C Well done 60
200°C Well done 60
Roasting poultry and fish
· Place the poultry or fish in an oven set at a moderate temperature of 180°C.
· Place a layer of foil over the fish for about three quarters of the cooking
time.
The table shows temperatures and cooking times for different kinds of fish and
poultry. These may vary depending on the thickness or bone content of the
meat.
POULTRY & FISH Chicken Duck Turkey
Fish
RECOMMENDED TEMPERATURE 180°C 180 – 200°C 180°C
180°C
MINUTES PER KG
45 – 50 60 – 70 40 – 45 (<10kg) 35 – 40 (>10kg) 20
GET TO KNOW YOUR NEW OVEN WITH THIS `SIMPLE TEST CAKE’
Although we strive for a perfect performing oven, it’s possible that there
will be some variation in colour when baking. Therefore, we suggest this
simple, easy and delicious to make Simple Test Cake, it can help you
understand your new oven. All ovens do sometimes have hot or cold spots,
therefore it is important to judge with your eye as you may require to rotate
during baking.
125g butter, softened to room temperature
1 cup caster sugar
1 teaspoon pure vanilla essence
4 large eggs
2 cups self-raising flour
Pinch of salt
4 tablespoons (80ml) full-cream milk
Method:
1. Butter base and sides of two, 20cm straight-sided round or square cake
pans. Then line the base with grease proof or baking paper.
2. Preheat oven to moderate 180°C (170°C fan forced) and ensure oven shelf is
in the centre position of oven.
3. Cream softened butter and sugar until light in colour.
4. Add vanilla essence.
5. Then eggs one at a time, beating well after each addition.
6. Sift flour and salt into the mixture and beat until well combined.
7. Add milk and beat or stir to combine.
8. Spoon mixture equally between prepared cake pans.
9. Bake in preheated oven, middle shelf for about 25 to 35 minutes or until
when tested with a fine cake skewer it comes out clean or the edges of the
cakes have come away slightly from the sides of the cake pans.
10. Remove from oven to wire cake rack and rest for 5 minutes before removing
from cake pans. Cool completely.
To serve: Sandwich together with your favourite jam or conserve, and dust top
with pure icing sugar.
NOTE: If desired, substitute butter for either margarine or olive oil spread.
Recipe is based on the Australian standard metric 250ml cup and 20ml
tablespoon sets.
SIMPLE TEST CAKE 25
DEALING WITH COOKING PROBLEMS
PROBLEM Uneven cooking
Baked products too brown on top
Baked products too brown on bottom
Cakes have a cracked thick crust
Baked products are pale, flat and undercooked
Cakes fallen in centre
Roast meat and potatoes not brown in fan oven Juices running out of meat
Grilled meats overcooked on outside & raw in the centre Grilled chops & steaks
curling
CAUSES
WHAT TO DO
Incorrect shelf position
Select shelf that puts food in centre of oven
Oven tray too large
Try other trays or dishes
Trays not in centre
Put trays in centre
Air flow in oven uneven
Rotate food during cooking
Grill tray affecting thermostat
Remove grill tray from oven on bake modes
Oven not preheated
Preheat the oven
Baking tins too large for recipe
Use correct size tins
Baking tins not evenly spaced
Stagger baking tins at least 3cm between tins and the oven walls
Products not evenly sized or spaced Make into same size and shape and spread
on trays
evenly over trays
Baking temperature too high
Lower the temperature
Baking tins too large for recipe
Use correct size tins
Baking tins are dark metal or glass
Change to shiny, light tins or lower the temperature by 10°C
Food too low in oven
Cook one shelf higher
Oven door opened too frequently during baking
Don’t open the oven door until at least half the cooking time has passed
Baking temperature too high
Lower the temperature
Grill tray affecting thermostat
Remove grill tray from oven on bake modes
Baking temperature too high
Lower the temperature
Food too low in oven
Cook one shelf higher
Cake batter over mixed
Mix just long enough to combine the ingredients
Baking tin too deep
Check size of tin and use recommended size
Baking tins dark
Change to shiny light tins
Baking temperature too low
Raise the temperature
Food too low in oven
Cook one shelf higher
Baking time too short
Increase cooking time
Incorrect baking tin size
Use correct size tin
Baking temperature too low
Raise the temperature
Baking time too short
Increase cooking time
Proportions of ingredients incorrect for recipe
Check recipe
Opening door too early during baking Do not open door until the last quarter of cooking time
Poor hot air circulation
Elevate food onto a rack to allow air circulation
Grill tray affecting thermostat
Remove grill tray from oven on bake modes
Do not pierce meat with fork, turn with tongs
Grill at lower insert position (Grill in oven models only)
Cut into fat every 2cm (¾”)
26 DEALING WITH COOKING PROBLEMS
CLEANING THE COOKER
Ovens and hotplates are made from steel and enamel. Do not use abrasives and harsh scourers as they may scratch the surface.
CAUTION
DO NOT remove the oven door.
Enamel
· Keep enamel clean by wiping it with a soft cloth dipped in warm soapy water.
· Rub difficult stains with a nylon scourer or cream powder cleanser.
· DO NOT use abrasive cleaners, powder cleaners, steel wool or wax polishes.
· If you use an oven cleaner, follow the instructions on the product
carefully.
Stainless Steel
· All grades of stainless steel can stain, discolour or becomes greasy. Clean
the cooker regularly, using the procedures outlined below, to maintain the
function and appearance of your appliance.
· Care must be taken when wiping exposed stainless steel edges as they can be
sharp.
· The front frame around the oven can be cleaned with stainless steel cleaners
if it comes soiled or discoloured.
· A suitable cleaner can be purchased from Electrolux Customer Care Centres.
· Always clean the stainless steel in the direction of the grain. Going
against the grain may scratch the surface.
Oven Shelves
· Chrome shelves: use detergent and hot water. If very dirty use a non-
abrasive nylon scourer.
Oven Grill Dish and Insert
· After every use and while still warm, wash pan and grill with warm soapy
water and a suitable oven cleaner. Rinse and dry before replacing in position.
Oven
· Use detergent, warm water (and household cloudy ammonia if necessary) and a
soft cloth. Dry thoroughly.
· Remove shelves when the cleaning oven.
· If there is a build-up of grease use a suitable oven cleaner, following the
instructions on the cleaning product carefully. Heat oven to 110°C and turn
oven off when 110°C is reached. Leave over-night. The fumes will loosen
stubborn grease and stains. Remove bowl, wash with hot, soapy water and dry
well before closing oven door again. Ensure oven is thoroughly rinsed and
dried before subsequent use.
Glass
· Glass surfaces on doors and control panels are best cleaned immediately
after soiling.
· A damp cloth may help remove baked on food deposits.
· Oven cleaners can be used to remove stubborn marks and stains.
WARNING
The door glass on this appliance is made from tough durable material that
withstands heating and cooling without breaking. However it must be remembered
that it is glass, it may break. Treat it accordingly!
Should you have any questions about the glass in your appliance, please
contact the customer care centre by calling 13 13 49 (Australia) or 0800 436
245 (New Zealand). Do not use harsh cleaners or sharp metal scrapers to clean
the oven door since they can scratch the surface, which may result in
shattering of the glass.
Ceramic Hotplate
· Remove all spilt food and fat with the supplied razor blade scraper, while
the ceramic glass is still warm but not hot. Wipe clean with dishwashing
detergent on a damp cloth.
· If aluminium foil, plastic items or high sugar content foods are allowed to
melt on the ceramic glass, clean immediately with the supplied razor blade
scraper before the surface has cooled down, otherwise pitting of the surface
can occur.
NOTE: Items with high sugar content not only include jam and fruit, but also
vegetables such as peas, tomatoes and carrots.
· When the ceramic glass is cool, apply a suitable ceramic glass cleaner.
· It is important to follow the cleaner manufacturer’s instructions. Remove
any cleaning residue from the surface as staining of the cooktop may occur.
· Do not use abrasive sponges or scourers, as they may scratch the surface.
· Any pitting, staining, scratches or other surface deterioration is excluded
from the warranty.
· All stains/water marks can be removed by vigorous cleaning, using a ceramic
glass cleaner.
· Sometimes surface stains appear to be `bubble’ marks under the ceramic
glass. These can be cleaned with a razor blade scraper and ceramic cleaner.
CLEANING THE COOKER 27
CLEANING THE COOKER (CONTINUED)
WARNING Grill
· Always keep the grill tray and grill tray insert clean, as any fat deposits
may catch fire.
CLEANING YOUR OVEN ACCESSORIES
Cleaning the grill
Grill tray and grill pan · Wash the grill tray and grill pan in hot soapy
water.
Gas Burners
· Flame port blockages should be removed with a small metal cake skewer or
nylon brush.
· Clean dirty spark plugs very gently with a nylon scourer. Do not use steel
wool. Do not bend spark plug as it may break.
· If the caps, crowns and cups are heavily soiled, use a non-abrasive cleaning
compound.
· Do not clean these parts with abrasive or caustic type cleaners, or clean in
a dishwasher as they will be damaged.
WARNING
Always keep the grill pan clean as any fat left in it may catch fire.
Grill Compartment
· Clean the grill compartment with hot soapy water. · If stronger action is
needed use a non-abrasive oven
cleaner applied with a nylon scourer.
Removing and replacing the oven light
Solid Hotplates
· Solid hotplates are fitted with stainless steel trim rings, which after
initial use, change colour to light brown. This is a normal characteristic of
stainless steel and will not affect the operation or performance of your
hotplates.
· Clean off any spillage after hot plate has cooled down.
· At regular intervals, clean hotplate with a nylon scouring pad and soapy
water. Wipe clean then warm hotplate for 30 seconds to dry the surface.
· Apply `hot plate protector’. Set hotplate on high for 3 minutes to allow
coating to harden.
WARNING
Make sure the appliance is turned off before you remove or replace parts, to
avoid the possibility of electric shock.
Turn oven light glass anti-clockwise to remove it for globe replacement
A special high temperature resistant globe should be used. This can be purchased from the Electrolux Customer Care Centre. Light globes are not covered by warranty.
28 CLEANING
CLEANING AND CARING FOR THE OVEN
Cleaning the oven door
Cool air circulates through the door to lower the surface temperature on the
outside of the oven door.
· To remove the top cap, press the ribbed release clips at each end and lift top cap away from the door.
CAUTION
· Do not remove the outer oven door. This product has a removable inner glass
insert for ease of cleaning.
To remove the inner door glass for cleaning
· Open the door fully to access the hinges then rotate the “stirrups” on both
hinges fully towards the door.
Stirrup · Slowly close the door until it stops against the
`stirrups’.
45°
· Using both hands, gently remove the inner glass by sliding out and lifting
away from the door.
Top trim Inner glass
The circle to be located on the lower right hand corner where applicable
· Hand wash only with a soft cloth and warm soapy water. When dry, polish with
a soft cloth and ensure the glass is dry before re-assembly.
· Wipe inner and outer glass gently with detergent and warm water.
· Wipe clean and dry thoroughly.
CLEANING AND CARING FOR THE OVEN 29
CLEANING AND CARING FOR THE OVEN (CONTINUED)
Re-assembling the oven door inner glass · When replacing the door inner glass,
make sure the
circle is positioned as shown in the image (where applicable). · Replace the
top cap ensuring the clips snap back into position. · Fully open the door,
rotate the stirrups back to their original position and close the door.
WARNING
· DO NOT use the oven without the inner glass fitted. · DO NOT use harsh
abrasives on glass as this may
damage the glass. · DO NOT place glass in dishwasher. Safety warnings about
cleaning
WARNING
· ALWAYS make sure that the cooker is turned off before cleaning.
CAUTION
· ALWAYS clean cooker immediately after use. · DO NOT use steam cleaners.
These may cause
moisture build-up, especially in the glass door. · DO NOT use caustic based
cleaners or harsh
abrasives, these will damage your oven. Door glass · DO NOT use harsh abrasive
cleaners or sharp metal
scrapers to clean glass since they can scratch the surface, which may result
in shattering of the glass.
30 CLEANING AND CARING FOR THE OVEN
SOLVING PROBLEMS
Faults
Further information
If there is a problem with the oven and/or grill, please:
· Check the points listed below before calling for service. It may be possible
to avoid a call by fixing the problem yourself and so continue cooking.
· For cooking problems, refer to “Dealing with cooking problems”.
NOTE: We may charge for service even in the guarantee period if your problem
is due to the causes listed below.
If you need more information, service, replacement parts or have a warranty
enquiry, please contact the Customer Care Centre:
· Australia 13 13 49, 8.00am – 5.00pm EST Monday – Friday
· New Zealand 0800 436 245, 8.00am – 5.00pm EST Monday – Friday
Please have the following information ready: Model, Model Number and Serial
Number. This is shown on the data plate which is visible when the oven door is
open.
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Oven or grill not working
Power not turned on
Switch on electricity
Household fuse blown
Check fuses
Controls incorrectly set
Reset controls
Circuit breaker tripped
Check circuit breaker
Clock not set
Set time of day on timer
Gas is off
Check gas is supplied to the cooker
NOTE: If the household fuse continues to blow, call the Electrolux Customer Care Centre.
Oven not heating enough
Foil or trays on bottom of oven
Remove foil or trays
Oven not pre-heated.
Pre-heat oven for 30 minutes
Light and fans on continuously
Timer not in manual mode
Set timer to manual mode
Oven not working
Timer not in manual mode
Set timer to manual mode
Household fuse blown
Check fuses
NOTE: If the household fuse continues to blow, call the Electrolux Customer Care Centre.
Oven light not working
Household fuse blown
Check fuses
Circuit breaker tripped
Check circuit breaker
Lamp blown or loose in socket
Replace or tighten lamp
NOTE: If the household fuse continues to blow, call the Electrolux Customer Care Centre.
Cooker smoking when first used
Protective oils being removed
Turn grill on high for 30 mins and then the oven on 220°C for 1 hour
Too much condensation building up when Too much water used when cooking baking
Reduce amount of water Leave oven door open after cooking
Smells when first using oven
Protective oils being removed
This is normal
120 minute timer ring not audible
Timer not wound sufficiently
Turn timer knob past 20 minutes then turn back to required number of minutes
Gas hotplates not working
Power not turned on at appliance
Switch on electricity
Household fuse has blown or power supply is turned off
Check fuses
Gas is off
Check gas is supplied to the cooker
Burner parts or spark plugs are wet or dirty
Clean and dry burners or spark plugs
Timer flashing
Power failure or interruption
Reset time of day
Stains appear to be under ceramic glass
These marks are on the surface of the Clean marks off with a razor blade
ceramic glass.
scraper and ceramic glass cleaner.
The oven seal is loose
The oven seal is attached at each corner. It may seem like a loose fit, but when the oven door is closed it will function correctly.
This is normal
NOTE: In the event of a power failure the gas burners may still be lit with a
handheld igniter and used. Take care to avoid letting unburned gas flow for
more than 5 seconds when attempting to light the burner.
SOLVING PROBLEMS 31
REMOVING THE OVEN DOOR
Removing the oven door (To be done by qualified personnel only) 1. With door
fully open, rotate the two stirrups
to its rest position.
4. Lift the door slightly and evenly while continuing to slowly close the door.
Stirrup
2. Close the door until it stops against the stirrups.
5. Remove the door by lowering gently and pull away from the frame of the oven. Care should be taken not to damage kick panel and other parts of the cooker.
3. Close the door further.
32 REMOVING THE OVEN DOOR
Replacing the oven door
(To be done by qualified personnel only) 1. Hold door with both hands. 2.
Locate both hinges into the frame slots
at the same time.
4. Open door fully and rotate stirrups away from you, and back to their original position.
5. Close the door fully.
3. Ensure that the location notch drops into frame slot. Care should be taken
not to damage other parts of the cooker.
Frame slot Hinge Notch
REMOVING THE OVEN DOOR 33
LPG CONVERSION DONG YANG IMPORTANT (MODELS WFE512, WFE614, WFE612 AND WFE616 ONLY)
This appliance is fitted with Natural Gas burner injectors.
Please follow the procedure below if a conversion to suit UNIVERSAL LPG is
required.
The conversion kit contains 5 injectors and 1 LPG sticker.
1. Remove the hotplate burners to access the hotplate injectors. Replace the
factory fitted NG injectors with the appropriate injectors, as supplied.
2. Unscrew the hex nut from the regulator. The hex nut, brass washer and
nylon insert will disengage as an assembly.
3. Unclip the nylon insert from the nut assembly by rotating the insert 1/4
turn, and pulling it free.
4. Turn over the insert, and clip back into position.
5. Refit the hex nut assembly to the regulator ensuring that it is fully
screwed down. The regulator is now set for connection to LPG.
6. Turn on the gas supply and at each new connection check for leaks using
soapy water: each hotplate valve should be turned on, one at a time, and the
injector hole blocked off for several seconds.
7. The operation of the regulator can be confirmed by connecting a manometer
to the pressure test point located on the side of the regulator body adjacent
to the outlet. With the appliance operating check the outlet pressure:
· When all burners of the appliance are operating at maximum,
· When the smallest burner of the appliance is operating at minimum.
Under these conditions the outlet pressure should not vary from the nominal
outlet pressure of 2.60kPa by more than ±0.52kPa.
8. If the regulator appears to not be performing satisfactorily then check
the following points:
· If the outlet pressure is consistently too low then the inlet pressure may
be too low and adjustment of an upstream regulator may be needed, or an
upstream regulator or valve with insufficient flow capacity may be present in
the gas supply line. If this is suspected then it may be necessary to repeat
the checks whilst measuring both the inlet and outlet pressure to determine if
the inlet pressure is in the range 2.75 7.00kPa.
· Check that the insert has been fitted correctly.
· Check that the turret screw is fully screwed down.
· Check that the regulator has been fitted to the gas supply line in the
correct orientation, the arrow on the base of the body indicates the direction
of gas flow.
Once these checks have been completed, if the regulator still fails to perform
in a satisfactory manner it should be replaced.
9. One by one, turn the knobs to minimum and screw in the bypass screw
(accessible when the knob is removed) until a small stable flame results. Turn
the knob to maximum and then back to minimum to ensure that the correct
minimum flame is maintained.
10. Attach the LPG sticker to the cooker, near the gas supply inlet. Cover
the Natural Gas label that is factory fitted.
Hex nut assembly, fully screwed down
Hex nut assembly, removed from regulator and insert disassembled
Insert oriented for Natural Gas operation
Insert oriented for LPG operation
34 LPG CONVERSION
LPG CONVERSION CHANT IMPORTANT (MODELS WFE512, WFE614 AND WFE612 AND WFE616 ONLY)
This appliance is supplied set up for Natural Gas usage. A conversion kit is
included with the product for Universal LPG usage. The conversion kit contains
5 injectors and 1 LPG sticker.
Please follow the procedure below if a conversion to suit UNIVERSAL LPG is
required:
1. Remove the hotplate trivets, burner caps and burner crowns to access the
hotplate injectors. Replace the factory fitted injectors with the appropriate
injectors, as supplied. Refer to injector orifice table for injector sizes.
The injector size is stamped on the side of the injector.
2. Unscrew the top hat nut from the regulator. The top hat nut and control
pressure spring assembly will disengage as an assembly.
3. Unscrew the threaded pin from top hat.
4. Upturn threaded pin, so spring is free and screw pin back into the top hat
until firm.
5. Refit the top hat nut assembly to the regulator ensuring that it is fully
screwed down. The regulator is now set for connection to LPG.
6. Turn on the gas supply and at each new connection check for leaks using
soapy water. Each hotplate valve should be turned on, one at a time, and the
injector hole blanked off for several seconds.
7. The operation of the regulator can be confirmed by connecting a manometer
to the pressure test point located on the side of the regulator body adjacent
to the outlet.
With the appliance operating check the outlet pressure:
· When all burners of the appliance are operating at maximum,
· When the smallest burner of the appliance is operating at minimum.
Under these conditions the outlet pressure should not vary from the nominal
outlet pressure of 2.60kPa by more than ±0.52kPa.
8. If the regulator appears to not be performing satisfactorily then check
the following points:
· If the outlet pressure is consistently too low then the inlet pressure may
be too low and adjustment of an upstream regulator may be needed, or an
upstream regulator or valve with insufficient flow capacity may be present in
the gas supply line. If this is suspected then it may be necessary to repeat
the checks whilst measuring both the inlet and outlet pressure to determine if
the inlet pressure is in the range 2.75 7.00kPa.
· Check that the insert has been fitted correctly.
· Check that the turret screw is fully screwed down.
· Check that the regulator has been fitted to the gas supply line in the
correct orientation, the arrow on the base of the body indicates the direction
of gas flow.
Once these checks have been completed, if the regulator still fails to perform
in a satisfactory manner it should be replaced.
9. One by one, turn the knobs to minimum and screw in the bypass screw
(accessible when the knob is removed) until a small stable flame results. Turn
the knob to maximum and then back to minimum to ensure that the correct
minimum flame is maintained.
10. Attach the LPG sticker to the cooker, near the gas supply inlet. Cover
the Natural Gas label that is factory fitted.
A
B
Turn top
hat nut anti-
clockwise
and remove
Top hat nut assembly, fully screwed down
C
D
Configuration for Natural Gas
E
F
Configuration for LPG
G
H
Flame size adjusted to maximum
Flame size adjusted to minimum
Bypass screw Control knob shaft
LPG CONVERSION 35
Warranty
FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: WESTINGHOUSE BUILT-IN OVENS,
COOKTOPS AND
FREESTANDING COOKER
This document sets out the terms and conditions of the product warranties for
Westinghouse Appliances. It is an important document. Please keep it with your
proof of purchase documents in a safe place for future reference should there
be a manufacturing defect in your Appliance. This warranty is in addition to
other rights you may have under the Australian Consumer Law.
1. In this warranty:
(a) ACL’ or
Australian Consumer Law’ means Schedule 2 to the Competition and
Consumer Act 2010;
(b) Appliance’ means any Electrolux product purchased by you and accompanied by this document; (c)
ASC’ means Electrolux’s authorised serviced centres;
(d) Westinghouse’ is the brand controlled by Electrolux Home Products Pty Ltd of 163 O’Riordan Street, Mascot NSW 2020, ABN 51 004 762 341 in respect of Appliances purchased in Australia and Electrolux (NZ) Limited (collectively “Electrolux”) of 3-5 Niall Burgess Road, Mount Wellington, in respect of Appliances purchased in New Zealand; (e)
Warranty Period’ means the period specified in clause 3 of this warranty;
(f) you’ means the purchaser of the Appliance not having purchased the Appliance for re-sale, and
your’ has a corresponding meaning.
2. Application: This warranty only applies to new Appliances, purchased and
used in Australia or New Zealand and is in addition to (and does not exclude,
restrict, or modify in any way) other rights and remedies under a law to which
the Appliances or services relate, including any nonexcludable statutory
guarantees in Australia and New Zealand.
3. Warranty Period: Subject to these terms and conditions, this warranty
continues in Australia for a period of 24 months and in New Zealand for a
period of 24 months, following the date of original purchase of the Appliance.
4. Repair or replace warranty: During the Warranty Period, Electrolux or its
ASC will, at no extra charge if your Appliance is readily accessible for
service, without special equipment and subject to these terms and conditions,
repair or replace any parts which it considers to be defective. Electrolux
may, in its absolute discretion, choose whether the remedy offered for a valid
warranty claim is repair or replacement. Electrolux or its ASC may use
refurbished parts to repair your Appliance. You agree that any replaced
Appliances or parts become the property of Electrolux.
5. Travel and transportation costs: Subject to clause 7, Electrolux will bear
the reasonable cost of transportation, travel and delivery of the Appliance to
and from Electrolux or its ASC. Travel and transportation will be arranged by
Electrolux as part of any valid warranty claim.
6. Proof of purchase is required before you can make a claim under this
warranty.
7. Exclusions: You may not make a claim under this warranty unless the defect
claimed is due to faulty or defective parts or workmanship. This warranty does
not cover:
(a) light globes, batteries, filters or similar perishable parts;
(b) parts and Appliances not supplied by Electrolux;
(c) cosmetic damage which does not affect the operation of the Appliance;
(d) damage to the Appliance caused by: (i) negligence or accident;
(ii) misuse or abuse, including failure to properly maintain or service;
(iii) improper, negligent or faulty servicing or repair works done by anyone
other than an Electrolux authorised repairer or ASC;
(iv) normal wear and tear;
(v) power surges, electrical storm damage or incorrect power supply;
(vi) incomplete or improper installation;
(vii) incorrect, improper or inappropriate operation;
(viii) insect or vermin infestation;
(ix) failure to comply with any additional instructions supplied with the
Appliance;
In addition, Electrolux is not liable under this warranty if:
(a) the Appliance has been, or Electrolux reasonably believes that the
Appliance has been, used for purposes other than those for which the Appliance
was intended, including where the Appliance has been used for any non-domestic
purpose;
(b) the Appliance is modified without authority from Electrolux in writing;
(c) the Appliance’s serial number or warranty seal has been removed
or defaced
8. How to claim under this warranty: To enquire about claiming under this
warranty, please follow these steps:
(a) carefully check the operating instructions, user manual and the terms of
this warranty;
(b) have the model and serial number of the Appliance available;
(c) have the proof of purchase (e.g. an invoice) available;
(d) telephone the numbers shown below.
9. Australia: For Appliances and services provided by Electrolux in
Australia: Electrolux goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the Appliance repaired or replaced if
the Appliance fails to be of acceptable quality and the failure does not
amount to a major failure. Acceptable quality’ and
major failure’ have the
same meaning as referred to in the ACL.
10. New Zealand: For Appliances and services provided by Electrolux in New
Zealand, the Appliances come with a guarantee by Electrolux pursuant to the
provisions of the Consumer Guarantees Act, the Sale of Goods Act and the Fair
Trading Act. Where the Appliance was purchased in New Zealand for commercial
purposes the Consumer Guarantee Act does not apply.
11. Confidentiality: You accept that if you make a warranty claim, Electrolux
and its agents including ASC may exchange information in relation to you to
enable Electrolux to meet its obligations under this warranty.
Important Notice Before calling for service, please ensure that the steps listed in clause 8 above have been followed.
AUSTRALIA
FOR SERVICE or to find the address of your nearest authorised service centre
in Australia
PLEASE CALL 13 13 49
For the cost of a local call
FOR SPARE PARTS or to find the address of your nearest
spare parts centre in Australia PLEASE CALL 13 13 50
For the cost of a local call
NEW ZEALAND
FOR SERVICE or to find the address of your nearest authorised service centre
in New Zealand
PLEASE CALL 0800 10 66 10
FOR SPARE PARTS or to find the address of your nearest
spare parts centre in New Zealand
PLEASE CALL 0800 10 66 20
WCook_Warr_Jul19
36 WARRANTY
NOTES
NOTES 37
NOTES
38 NOTES
NOTES
NOTES 39
For more information on all Westinghouse appliances, or for dimension and
installation information, call into your retailer, phone or email our customer
care team or visit our website: AUSTRALIA phone: 13 13 49 email:
customercare@electrolux.com.au web: westinghouse.com.au NEW ZEALAND phone:
0800 436 245 email: customercare@electrolux.co.nz web: westinghouse.co.nz
and WESTINGHOUSE are trademarks of Westinghouse Electric Corporation. Used
under license. All Rights Reserved. ANC A21384302 Rev B © 2022 Electrolux Home
Products Pty Ltd. ABN 51 004 762 341 W_MAN_540_600_SU_Cooker_A4_Mar22
References
- Westinghouse NZ | Westinghouse Home Appliances
- Westinghouse Australia | Westinghouse Home Appliances
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>