iclever IC-DK03 Wireless Keyboard and Wireless Mouse Combo User Manual

iclever IC-DK03 Wireless Keyboard and Wireless Mouse Combo

Wireless Keyboard and Wireless Mouse  Combo
User Manual

Thank you for choosing iClever! Please read this user manual carefully and save it for future reference.

Package Contents

• 1x Wireless Keyboard
• 1x Wireless Mouse
• 1x USB Receiver for Keyboard and Mouse (in the mouse storage slot) 1x Silicone Keyboard Cover
• 1x USB-C Charging Cable
• 1x User Manual

Specification for the Keyboard

• Connection type 2.4Ghz and Bluetooth
• Connected devices Up to 3
• Dimensions 42812516mm / 16.85 *4.92 .. 0.63in
• Net weight 428g
• Layout size Full size with numpad
• Lithium battery capacity 280mAh
• Charge time < 2 hours / USB-C charge
• Uninterrupted working time 90 hours
• Compatibility Windows, Mac, iOS, Android
• Material ABS + Metal
• Frequency band 2402MHz-2480MHz
• Maximum transmission power OdBm

specification for the Mouse

Power Saving Mode
The keyboard will enter power saving mode if idle for 30 minutes. Press any key to exit i1 and wait for 3 seconds.
Compatibility

• For Bluetooth Compatibility:
  • Windows 8 or late, macOS 10.12 or late, Android 6.0 or late, iOS 13.0 or late Note: not fully compatible with Bluetooth adapter, Mac mini, Samsung smart TV, Nokia Phones, and XBOX.
• For 2.4G Wireless Compatibility:
  • Windows 8 or late, macOS 10.12 or late with USB-A port.

Keyboard Overview

1. Power Switch: slide ON/OFF to turn on/off the keyboard.
2. Bluetooth Channel Indicator: to indicate the Bluetooth channel status.
3. 2.4G Wireless Channel Indicator: to indicate the 2.4 channel status. @ Caps lock Indicator:
   • press “caps lock” key to switch between uppercase and lowercase.
   • press “F6” key to check the power reminding, each flash represents 25% power reminding, 4 flashes in total.
4. Charging Indicator:
   • stay in red when charging.
   • tum green after fully charged (about 2 hours fully charged).
5. Charging Port: for charging.

Mouse Overview

Note: backward and forward buttons are not working in iPhone, iPad, Mac.

•  2.4GJBT1/BT2 Indicator:
  2.4G/Bluetooth 1/Bluetooth 2 indicator.

• Connect Button:
  click this button to switch among 2.4G or Bluetooth 1 or Bluetooth 2 channel. Hold and press this button for 5s to Bluetooth pairing mode.

• ON/OFF Switch: slide “ON” f •oFF” to tum on/off the mouse.

• Storage Slot: used to store the use receiver.

Mouse Pairing instruction

• A.2.4G Wireless Connection
• Step 1. Remove the USB receiver from the bottom of the Mouse. Plug the 2.4G USB receiver into the USB port of the computer.
• Step 2. Slide the mouse ON/OFF switch to “ON” to tum on the mouse. Step 3. On the bottom of mouse, click the “Connect’ button to choose 2.4G channel.

Bluetooth Connection
Pair with 1st device

• Step 1. Slide the mouse ON/OFF switch to “ON” to tum on the mouse

• Step 2. On the bottom of mouse, click the “Connect” button to choose
  BT1 channel.

• Step 3. Hold and press the ·connect” button for 5 seconds to pairing
  mode in BT1 channel, and the indicator will keep flashing.

• Step 4. On your device, find “iClever Mouse” and click to connect it.

• Pair with 2nd device

• Step 1. Slide the mouse ONIOFF switch to “ON” to tum on the mouse.

• Step 2. On the bottom of mouse, click the “Connect” button to choose  BT2 channel.

• Step 3. Hold and press the “Connect” button for 5 seconds to pairing
  mode in BT2 channel, and the indicator will keep flashing.

• Step 4. On your device, find “iClever Mouse” and click to connect it.

• Click “Connect” button to switch among the connected device.

Re-pair the channel that already connected.

• Step 1. Click the “Connect” button to choose BT1/BT2 channel. Step 2. Hold and press the “Connect” button for 5s until the BT1!BT2 channel indicator keep flashing.
• Step 3. On your device, find “iClever Mouse” and click to connect it.

2,4G Wireless Connection

• Step 1. Charge the keyboard for 2 hours.
• Step 2. Plug the 2.4G USB receiver into the USB port of the computer. *If your device is USB-C port, please connect it by a hub.
• Step 3. Slide the power switch right to power on the keyboard.
• Step 4. Press the key of 2.4G wireless mode.
• Step 5. Press “in” + “Q” /”W” keys to choose the system. (fn+Q is for iOS and Mac OS, and fn+W is for Windows and Android)

Bluetooth Wireless Connection Pair with 1st device

• Step 1. Charge the keyboard for 2 hours.
• Step 2. Slide the power switch to “ON” to turn on the keyboard.
• Step 3. Hold and press the key of for 5 seconds to pairing mode in channel 1, and the Bluetooth channel 1 indicator will quickly flash blue.
• Step 4. On your device, find the Bluetooth name “iClever IC-DK03 KB” and click to connect it. For example, for iPad, click “Settings” > “Bluetooth” > Under “MY DEVICES” find the pairing name and click to connect it.
• Step 5. Press “fn” + “Q”/”W” keys to choose the system.

Pair with 2nd device

• Step 1. Slide the power switch to “ON” to turn on the keyboard.
• Step 2. Hold and press the key of for 5 seconds to pairing mode in channel 2, and the Bluetooth channel 2 indicator will quickly flash blue.
• Step 3. On your device, find the Bluetooth name “iClever IC-DK03 KB” and click to connect it.
• Step 4. Press “n” + “Q”/”W” keys to choose the system.

Connect with iClever Bluetooth Keyboard in different system:

• For Windows 10 PC/laptop:

• Click Win > Setting > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth > click “iClever IC-DK03 KB” to connect.

• For MacBook/i Mac:
  Click System Preferences > Bluetooth > click “iClever IC-DK03 KB” to connect.

• For iPad & iPhone:
  Click Setting> Bluetooth > click “iClever IC-DK03 KB” to connect.

Notes:

• Auto re-connect function: the keyboard will connect with the last-used device automatically.

• Do not connect it via a Bluetooth adapter.

• If fail to connect, please read FAQ.

• Switch among the connected devices.
  Press the key to switch among connected devices.

• Re-pair the channel that has already connected.
  Hold and press the key of  for 5 seconds again to re-pair.

Keys and Functions

The table below describes special key combinations for different operating systems. Before to use, please switch to your system by pressing “fn’ + “Q’ (for iOS and Mac) or / “fn” + “W” (for Windows and Android).

FAQ

• Q: Is this keyboard fully compatible with Macbook/lMac?
  A: No, it is not fully compatible. The keys of are not working for MacBook and iMac.
  Q: Is this keyboard fully compatible with iPhone iPad?

• A: No, ii is not fully compatible. The keys of are not working for iPhone and iPad.

• Q: How to fix keyboard typing multiple letters on Windows 10?
  Turn on the Filter Keys:
  Click win key > Settings > Ease of Access > Keyboard > find “Use Filter Keys”, tum ii on.

• Q: How to fix keyboard typing multiple letters on Mac?

1. On a Mac, choose the Apple menu> “System Preferences”, click “Keyboard”, and choose the Keyboard tab.
2. Locate the “Key Repeat” slider setting and adjust it to the ‘Off’ position.

• Q: Keyboard/Mice – Buttons or keys do not work correctly.

  1. Restart your PC/laptop and iClever Keyboard/mouse.
  2. Clean the button/key with compressed air .
  3. Verify the product or receiver is connected directly to the computer and not to a hub, extender, switch, or something similar.
  4. Unpair/repair or disconnect/reconnect hardware.
  5. Windows only- try a different USB port.
  6. Try on a different USB port or a different computer

• Q: My keyboard fails to connect by 2.4G mode.

  1. Ensure you already plug the USB Receiver into the USB port.

  2. Ensure you already press the key of Fl.

  3. Verify the product or receiver is connected directly to the computer and not to a hub, extender, switch, or something similar.

  4. Charge the keyboard for 2 hours.

  5. Move the receiver to a different USB port on your computer.

  6. Try moving away at least 8 inches (20 cm) from
     Any device that could emit wireless waves: Microwave, cordless phone,  baby monitor, wireless speaker, garage door opener, WiFi router
     Computer power supplies
     Metal or metal wiring in the wall

  7.  Try on a different computer or email us.

• Q: My keyboard fails to connect by Bluetooth mode.

  1. Charge the keyboard for 2 hours.
  2. Make sure that your iClever device and computer are within close proximity of each other.
  3. Try moving away at least 8 inches (20 cm) from metal and other sources of wireless signal.
  4. Delete all the Bluetooth connection records. (For example for iPad click “Settings”> “Bluetooth” > under ‘MY DEVICE” to delete all the Bluetooth connection records)
  5. On your device, turn off the Bluetooth and turn it on again to Refresh. (For example for iPad click “Settings”> “Bluetooth” > if the on-screen switch beside Bluetooth currently shows as ON tap it twice to refresh it)
  6. Connect it again or email us

• Q: Delay when typing or frequently get disconnected,

  1. Restart your Bluetooth device.

  2. Charge the keyboard for 2 hours.

  3. Keep the keyboard and computer are within close proximity of each other.

  4. Try moving away at least 8 inches from:
     Any device that could emit wireless waves: Microwave, cordless phone, baby monitor, wireless speaker, garage door opener, WiFi router
     Computer power supplies, Metal or metal wiring in the wall

  5. Do not use your wireless keyboard on metal surfaces.

  6. Check if there are any updates running in the background that may cause the delay.

  7. Check your computer memory, insufficient memory may cause the delay.

  8. Try on a different APP/device to connect. If the problem still persists you will need to follow specific steps based on your device OS. Please email us to gel advanced troubleshooting.

Importer Information
US Importer: Thousand shores Inc., 37707 Cherry St, Newark, CA 94560, USA

Tips

• Keep away from oil, chemical, liquid, and snacks.
• Keep away from sharp objects.
• Keep away from metal and other sources of wireless signal.
• Email : support@iclever.com

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer­ence by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>