VIVOTEK AW-FGT-180F-250 Unmanaged PoE Switch Commercial Installation Guide
- May 15, 2024
- Vivotek
Table of Contents
VIVOTEK AW-FGT-180F-250 Unmanaged PoE Switch Commercial
INTRODUCTION
The AW-FGT-180F-250 is a 16 port 10/100BaseT unmanaged PoE switch capable of feeding 15.4/30W power to Power over Ethernet (PoE) devices. It comes with another 2x GbE combo ports. The switch is capable of a total of 240 Watts power budget.
PACKAGE CONTENTS
IMPORTANT
- Install the PoE switch in a ventilated and dry place that is free of electromagnetic sources, vibration, moisture, and dust.
- Make sure the ventilation openings on the switch are not blocked.
- Use CAT5 or 6 UTP/STP cables.
- AC input (100~240V/AC, 50~60z), for a max. consumption of 250W.
CONNECTION
Front Panel
Rear Panel
IMPORTANT:
The switch already comes with a lightning protection mechanism. You should
always ground the switch through the PE (Protecting Earth) cable of the AC
cord or with ground cable. Not grounding the power may cause the power input
to damage the unit.
DIP switch
LED DEFINITIONS
All specifications are subject to change without noice. Copyright © 2023 VIVOTEK INC. All rights reserved.
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131 T:4 08-773-8686 | F: 408-773-8298 |
salesusa@vivotek.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>