VIVOTEK RX9502 Video Receiver Installation Guide
- October 30, 2023
- Vivotek
Table of Contents
VIVOTEK RX9502 Video Receiver
Product Information: RX9502 Video Receiver
The RX9502 Video Receiver is a network video receiver that allows users to connect IP cameras for surveillance purposes. It comes with a mounted flash memory that contains the software necessary for its operation. The package contents include the video receiver, a quick installation guide, and a connection diagram.
Warnings before Installation
- Keep the Network Video Receiver away from water and high-humidity environments.
- Do not place the Network Video Receiver in direct sunlight or near sources of heat such as televisions or ovens.
- Do not attempt to remove or uninstall the software on the mounted flash memory.
- If the Network Camera gets wet or emits smoke or unusual odors, immediately turn off the power.
Package Contents
- RX9502 Video Receiver
- Quick Installation Guide
- Connection Diagram
Product Usage Instructions
Follow the steps below to use the RX9502 Video Receiver:
- Connect the IP cameras to the video receiver using LAN/WAN cables according to the connection diagram provided.
- Plug the video receiver into an AC power source using the provided AC adapter.
- Turn on the power and wait for the video receiver to initialize.
- Access the video receiver through a CMS station or NVR to view and manage surveillance footage.
Note: If you encounter any issues with the product, please contact authorized distributors for warranty and RMA service. Visit https://www.vivotek.com/support/warranty-rma for more information.
Warning Before Installation
- Power the Network Video Receiver if you detect abnormal smells or smoke coming from it.
- Do not place the Network Video Receiver around the heat sources, such as the television or oven.
- Keep the Network Video Receiver away from direct sunlight.
- Do not attempt to remove or uninstall the software on the mounted flash memory.
- Keep the Network Video Receiver away from water. If the Video Receiver is wet, power off immediately.
- Do not place the Network Video Receiver in high-humidity environments.
Package Contents
Hardware Installation
Connection Diagram
Please contact authorized distributors for warranty and RMA service.
Visit https://www.vivotek.com/support/warranty-rma All specifications are
subject to change without notice.
Copyright © 2022 VIVOTEK INC. All rights reserved
VIVOTEK Europe
Zandsteen 15, 2132 MZ Hoofddorp Delta Electronics
T: +31 (0)20 800 3817 | E:
saleseurope@vivotek.com