VIVOTEK IB9389-EHT-v2 Camara IP Bullet Exterior Instruction Manual
- October 30, 2023
- Vivotek
Table of Contents
IB9389-EHT-v2 Camara IP Bullet Exterior
Product Information
The product being referred to in the user manual is a surveillance camera with the model number IB9389-EH-v2 or IB9389-EHT-v2. It has a range of POE 42.5~57V, 0.3~0.23A (12.95W). The product must be installed and protected in a location that is not easily accessible and away from impacts or heavy vibration. It should not be installed on an unstable mount or surface. The product should be used in compliance with local laws and regulations.
Product Usage Instructions
- Choose a location for installation that is not easily accessible and away from impacts or heavy vibration. It should be at least 3 meters above the ground.
- Ensure that the location is compliant with local laws and regulations.
- Do not install the product on an unstable mount or surface.
- Before installation, ensure that the product is kept in a dry and well-ventilated environment.
- Use only accessories that comply with the technical specifications of the product.
- Do not disassemble the camera or perform maintenance tasks when power is connected.
- For information on power adapters, contact authorized VIVOTEK dealers.
Warning Before Installation
The product must be installed and protected in a location that is not easily
accessible, and is away from impacts or heavy vibration. For example, at the
location where the surveillance cameras are looking down or installed at high
positions such as on a wall, or at least 3 meters above the ground.
- The product should be used in compliance with local laws and regulations.
- Before installation, the product should be stored in a dry and ventilated environment.
- Do not install the product on an unstable mount or surface
- Use only accessories that comply with the technical specifications of the product.
- Do not disassemble the camera or perform maintenance task when power is connected.
- Please contact VIVOTEK’s certified dealers for power adapters.
Warning Before Installation
The product must be installed and protected in a location that is not easily accessible, and is away from impacts or heavy vibration. For example, at the location where the surveillance cameras are looking down or installed at high positions such as on a wall, or at least 3 meters above the ground.
- The product should be used in compliance with local laws and regulations.
- Do not install the product on an unstable mount or surface.
- Do not disassemble the camera or perform maintenance task when power is connected.
- Before installation, the product should be stored in a dry and ventilated environment.
- Please contact VIVOTEK’s certified dealers for power adapters.
Hardware installation
EHT Configuration > Media > Imagen > Enfoque
| Modelo | IB9389-EH-v2 | IB9389-EHT-v2 |
|---|---|---|
| Rango | POE 42.5~57V , 0.3~0.23A (12.95W) | POE 42.5~57V , 0.3~0.23A (12.95W) |
Visit https://www.vivotek.com/support/warranty-rma
Copyright © 2021 VIVOTEK INC.
VIVOTEK INC.6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235,
Taiwan, R.O.C.
T: +886-2-82455282
F: +886-2-82455532
E: sales@vivotek.com
VIVOTEK EuropeZandsteen 15, 2132 MZ Hoofddorp Delta Electronics
T: +31 (0)20 800 3817
E: saleseurope@vivotek.com
VIVOTEK USA, INC. 2050 Ringwood Avenue, San Jose, CA 95131
T: 408-773-8686
F: 408-773-8298|E: salesusa@vivotek.com