VIVOTEK IB9367-EHT-v2 Network Camera Installation Guide
- October 30, 2023
- Vivotek
Table of Contents
VIVOTEK IB9367-EHT-v2 Network Camera Installation Guide
Warning Before Installation
- Power off the Network Camera as soon as smoke or unusual odors are detected.
- Do not place the Network Camera on unsteady surfaces.
- Do not insert sharp or tiny objects into the Network Camera
- Replacing or failing to properly install the waterproof components, e.g., cables or cable glands, will void our IP65/66/67 warranty.
- Refer to your user’s manual for the operating temperature.
- Do not touch the Network Camera during a lightning storm.
- Do not drop the Network Camera.
Package Contents
Hardware Installation
Extension I/O Kit: Separately purchased
Consumption & Power Input
PoE 802.3af class 0 – 37V/0.291A 10.77W 57V/0.186A 10.60W (PoE mid-span or
switch)
DC 12V input – 9.24W 0.77A; AC 24V – 0.74A PF 0.58
- Stretch the waterproof tape by twice its length and wind around the cables.
- The tape should overlap the cable joints by 20mm.
- All connectors, whether they are used or not, should be waterproof.
Assembly Instructions
Please contact authorized distributors for warranty and RMA service.
Visit https://www.vivotek.com/support/warranty-rma
All specifications are subject to change without noice. Copyright © 2022 VIVOTEK INC. All rights reserved.
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T: +886-2-82455282|
F: +886-2-82455532|
E: sales@vivotek.com
VIVOTEK Europe
Zandsteen 15, 2132 MZ Hoofddorp Delta Electronics
T: +31 (0)20 800 3817
E: saleseurope@vivotek.com
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T: 408-773-8686|
F: 408-773-8298|
E: salesusa@vivotek.com