veektomx VT101 Built In Cables Power Bank User Manual
- May 15, 2024
- VEEKTOMX
Table of Contents
Safety in, Power out
Model: VT101
veeKtomx 10000mAh
37Wh 3-Port Power Bank
User Manual
Thanks for purchasing VeeKtOmMx products. Please read this User Manual thoroughly before use of the product and retain it for future reference.
PRODUCT DIAGRAM
SPECIFICATIONS
Model | VT101 |
---|---|
Battery Capacity | 10000mAh/37Wh |
USB Cable Input | 5V/2.0A |
Type-C Input/Output | 5V/2.4A |
Micro Cable Output | 5V/2.4A |
Type-C Cable Output | 5V/2.4A |
Lightning Cable Output | 5V/2.4A |
USB Output | 5V/2.4A |
Dimensions | 144.8×68.5×18.5 mm 5.7×2.7×0.7 in |
Weight | 260g /9.10z |
USING YOUR POWER BANK
- Gants your curing cable to your device, and then connect the other end
- Connect a compale cable om the power bank to your device.
Before First Use
- Please pay attention to the symbols and indicators for proper use.
- It is recommended to fully charge the unit with a standard charger before first use.
Using Your Power Bank
Check the battery level
Press the Wakeup Button to check the battery level.
Charging your power bank.
- Charging the power bank via USB C cable or the built in USB A cable.
- Before full charge till 100%, the LED Display will keep flashing.
Note:
- ‘The LED display will stop flashing till charging to 100%.
- You can charge the power bank when it is charging your device.
Charging your device.
- Charging your device via the lighting /USB C/Micro cable, or via USB port.
- Charging will start automatically.
- Unplug the charging cable when charging has completed.
Wakeup Button
- Press the button to show the remaining battery percentage.
- During charging, double press the button to cut off the output, press again to resume.
Warranty
- 12 Month Warranty.
- Life-time Support.
Note:
This warranty is void if the defect is caused by:
- Damage caused by force majeure.
- Accidental damage, misuse, abuse, neglect.
- Improper repair or alteration by unauthorized persons.
- Expired warranty period.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING – When using this product, basic precautions should always be
followed, including the following:
a) Read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is necessary when the
product is used near children.
c) Do not put fingers or hands into the product.
d) Do not expose power bank to rain or snow.
e) Use of a power supply or charger not recommended or sold by power pack
manufacturer may result in a risk of fire or injury to persons.
f} Do not use the power bank in excess of its output rating. Overload outputs
above rating may result in a risk of fire or injury to persons.
g) Do not use the power bank that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior resulting in fire, explosion or
risk of injury.
h) Do not disassemble the power bank. Take it to a qualified service person
when service or repair is required. Incorrect reassembly may result in a risk
of fire or injury to persons.
i) Do not expose a power pack to fire or excessive temperature, Exposure to
fire or temperature above 100°C may cause explosion. The temperature of 100°C
can be replaced by the temperature of 212°F.
j) Have servicing performed by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the product is
maintained.
k) Switch off the power bank when not in use.
l) Do not place or use this product in high temperature or damp environment.
Do not expose it to the sun.
m) Dispose the power bank according to the local statues environmental
protection regulations.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
WEEE Compliance
DO not to dispose of product as unsorted municipal waste and to collect such WEEE separately, for proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge. Please contact your local authority for further details of your nearest designated collection station.
E-MAIL: support@veektomx.group
Manufacturer : Shenzhen Baihang Technology Co., Ltd.
Address: Zhongliangfenghuangli Huayuan, Rentian conmunity,
Fuhai street, Bao’an District, Shenzhen
MADE IN CHINA
Documents / Resources
|
veektomx VT101 Built In Cables Power
Bank
[pdf] User Manual
VT101, VT101 Built In Cables Power Bank, Built In Cables Power Bank, Cables
Power Bank, Power Bank, Bank
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>