VEEKTOMX VT501 56000mAh 6 Port Power Bank User Manual

VEEKTOMX VT501 56000mAh 6 Port Power Bank

Product Information

Specifications

• Capacity: 207.2Wh
• Input: IN2(Lightning) – 5V/2.0A, 9V/2.0A
• Outputs: OUT1(Type-C) – 5V/3.0A, 9V/3.0A, 12V/2.5A
• OUT4(USB), OUT5(USB), OUT6(USB) – 5V/3.0A, 9V/2.0A, 12V/1.5A
• IN/OUT3(Type-C) – Input: 15V/3.0A, 20V/3.0A | Output: 5V/3.0A
• Flashlight Power: 2W
• Dimensions: 1597354.6mm/6.26×2.9×2.15in
• Weight: 1040g / 36.68oz

FAQ

• Q: How many devices can I charge simultaneously?
  • A: You can charge up to 5 iPhone/Android devices at the same time.
• Q: Can I use any cable to enable quick charging/power delivery?
  • A: No, quick charging/power delivery only works with a quick charging/power delivery cable and your device should support QC/PD protocol.
• Q: What are the dimensions and weight of the product?
  • A: The product dimensions are 1597354.6mm/6.26×2.9×2.15in and it weighs 1040g / 36.68oz.

Product Usage Instructions

Charging

1. Connect the power bank to a power source using the IN2(Lightning) input.
2. The LED display will flash during charging and stop flashing when fully charged.
   • Notes: Do not charge the power bank while it is charging your device.

Device Charging

1. Connect your device to the appropriate output port based on its charging cable (OUT1(Type-C), OUT4(USB), OUT5(USB), or OUT6(USB)).
2. Ensure your device supports QC/PD protocol for quick charging/power delivery.
3. Use a quick charging/power delivery cable for optimal performance.

LED Flashlight

1. Press the Light Button to turn on the LED flashlight.
2. Press the button to cycle between full brightness, low brightness, and SOS lighting modes.
3. Press and hold the light button for 2 seconds to activate the SOS rescue mode.
4. Press the button again to turn off the flashlight.

Thanks for purchasing VeeKtOmx products. Please read this User Manual thoroughly before use of the product and retain it for future reference.

PRODUCT DIAGRAM

SPECIFICATIONS

• Model : VT501
• Battery Capacity: 56000mAh/207.2Wh
• OUT 1 (Type-C) Output: 5V/3.0A 9V/3.0A 12V/2.5A
• IN 2 (Lightning) Input: 5V/2.0A 9V/2.0A
• IN/OUT 3 (Type-C) Input: 5V/3.0A 9V/3.0A 12V/3.0A
  • 15V/3.0A 20V/3.0A
• IN/OUT3(Type-C) Output: 5V/3.0A 9V/3.0A 12V/3.0A
  • 15V/3.0A 20V/5.0A
• OUT4(USB) Output: 5V/3.0A 9V/2.0A 12V/1.5A
• OUT5(USB) Output: 5V/3.0A 9V/2.0A 12V/1.5A
• OUT6(USB) Output: 5V/3.0A 9V/2.0A 12V/1.5A
• OUT1+OUT4 Output: 5V/3.0A
• IN/OUT3+OUT5/OUT6 Output: 5V/3.0A
• IN/OUT3+OUT1 Output: 20V/5A+12V/2.5A
• Flashlight power: 2W
• Dimensions: 1597354.6mm/6.26×2.9×2.15in
• Weight: 1040g / 36.68oz

USING YOUR POWER BANK

Before First Use

• Please pay attention to the symbols and indicators for proper use,
• It Is recommended to fully charge the unit with a standard charger before first use.

Using Your Power Bank

Check the battery level

• Press the Wakeup Button to check the battery level.

Charging your power bank

1. Charge the power bank via the Type-C/Lighting port.
2. The second digit on the LED display will flash until it reaches 100.

Note

• The LED display will stop flashing till charging to 100%.
• You can not charge the power bank when it is charging your device.

Charging your device

1. Connect your device to the power bank via the Type-C/USB output port.
2. Charging will start automatically.
3. Unplug the charging cable when charging has completed.

Note: Quick charging/power delivery only works with a quick charging/power delivery cable and your device should support QC/PD protocol.

Wakeup Button

1. Press the button to show the remaining battery percentage.
2. During charging, double press the button to wt off the output press again to resume.

LED Flashlight

1. Press the Light Button to use the LED flashlight.
2. Choose between full brightness, low brightness, and SOS lighting modes at the push of the button.
3. Press and hold the light button for 2 seconds to enter the SOS rescue mode and flash, and it will turn off when you press the button again.

Warranty

• 12 Month Warranty.
• Life-time Support.

Note: This warranty Is void if the defect Is caused by:

• Damage caused by force majeure.
• Accidental damage, misuse, abuse, neglect.
• Improper repair or alteration by unauthorized persoos.
• Expired warranty period.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING:  When using this product, basic precautions should always be followed, including the following:

• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put fingers or hands into the product.
• Do not expose power bank to rain or snow.
• Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons.
• Do not use the power bank in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
• Do not use the power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not disassemble the power bank. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
• Do not expose a power pack to fire or excessive temperature.
• Exposure to fire or temperature above 100°C may cause explosion. The temperature of 100°C can be replaced by the temperature of 212°F.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
• Switch off the power bank when not in use.
• Do not place or use this product in high temperature or damp environment. Do not expose it to the sun.
• Dispose the power bank according to the local statues environmental protection regulations.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

WEEE Compliance

Do not to dispose of product as unsorted municipal waste and to collect such WEEE separately, for proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge. Please contact your local authority for further details of your nearest designated collection station.

Contact

• www.veektomx.group
• E-MAIL:support@veektomx.group
• Manufacturer: Shenzhen Baihang Technology Co., Ltd.
• Address: Address: Zhongliangfenghuangli Huayuan, Rentian community, Fuhai street, Bao’an District, Shenzhen

MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>