Furniture of America FGI-17703C21 Lanahan Farmhouse 5 Shelf 40 Inch Slatted Cabinet Instruction Manual
- May 15, 2024
- Furniture of America
Table of Contents
Instruction Manual
**VERSION
21-07**
Shelf 40 Inch Slatted Cabinet
TOOLS REQUIRED
ASSEMBLY RATING
The Assembly Rating is a 5-point system showing the level of effort needed to
assemble a specific product.
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you
purchase our product. We fully stand behind our products from start to finish.
Our customer service department is available Monday – Friday 8:30 AM – 5:30 PM
Pacific and can help with assembly questions as well as, if necessary,
replacing damaged or missing parts. To help expedite our service, please have
these assembly instructions readily available, along with your order receipt.
CHECK BEFORE STARTING
Are you missing anything?
Double-check all parts, hardware and accessories listed are all accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the parts? We can send replacements!
Check out our Quick Tips!
We recommend reviewing the pre-assembly handouts. Even experts need a
refresher now and then!
Prep Time!
Please review the assembly instructions and all diagrams prior to assembling.
Arrange parts as recommended on Page 7 and group identical hardware together
to make assembling easier.
PRE ASSEMBLY INTRODUCTION
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
Teamwork
ALWAYS have at least two people to help with transporting and assembling the
product to avoid potential injury and/or damage.
Suitable Location
Assembling near the area of the intended location is highly
recommended.
Sufficient
Space
Make sure you have enough space to move around during the assembly.
Avoid Scratches
Use cardboard, blankets or a carpeted area while assembling furniture to
prevent scratches.
Flat Surface
Make sure the furniture rests on a flat and level surface with each leg evenly
touching the floor.
ASSEMBLY AND CARE ADVICE
FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY
DAMAGE. Position each part correctly and insert screws or bolts into their
respective holes.
Use the
appropriate hand tools or power tools for assembly.
Select steps, such as tightening screws and/or bolts, may require hand tools
to avoid causing damage during assembly. Save the instructions and store any
supplied tools for later maintenance. 
Turn clockwise to tighten and only tighten when step is completed
or when instructed to do so.
After two weeks, check and tighten any loose hardware and repeat
again every six months thereafter.
IT IS THE USER’S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE HARDWARE MAY LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO SUPPORT ITS INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE SERIOUS INJURY.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS
Note :
Every cam lock bolt must have a cam lock connector in order to fasten the
parts together.
- Screw the cam bolt into panel.
- Insert the cam bolt into the bolt hole of joint panel.
- Align the cam lock with its side opening (or arrow) pointing to cam bolt.
Turn the cam lock clockwise gently until it will not turn any more.
BUFFET
- Please keep instructions for future reference.
- Check the quantity and irregularity of parts and hardware before you start.
PARTS
HARDWARE
GET READY
Please group boards as below.
|
---|---
|
|
|
|
|
ASSEMBLY COMPLETED
Please ensure the furniture rests on an even and flat surface. If the product
wobbles or feels loose, double-check all bolts and/or screws are properly
tightened and secured.
Keep this handy!
Please retain this instruction manual and any order-related information for
future reference.
Lift, don’t drag!
To avoid damage to product please always LIFT the product when transporting of
adjusting the placement.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>