CRUISE CRPP-VO2.14 High End Tweeter Upgrade Set User Manual
- May 15, 2024
- CRUISE
Table of Contents
- CRUISE CRPP-VO2.14 High End Tweeter Upgrade Set
- Product Information
- Product Usage Instructions
- Warranty
- DECLARATION OF CONFORMITY
- Included parts
- Pre installation
- Mounting info
- General door panel dismounting
- Installation
- Crossover
- Reassembly door
- Specifications
- Dimensions
- Compatible car models
- Product markings
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CRUISE CRPP-VO2.14 High End Tweeter Upgrade Set
Product Information
Specifications
- Model: DLS Cruise CRPP-VO2.14/18
- Impedance vs Frequency: Impedance varies with frequency
- Dimensions: Standard tweeter size
- Compatible Car Models: Refer to specific car models for compatibility
- Product Markings: Marked with TW-A and TW-B for cable identification
Product Usage Instructions
Pre-Installation
- Disconnect the battery by securing the negative terminal to prevent any damage.
Mounting Information
- Ensure your vehicle has the same size speaker/tweeter before starting the assembly.
- Bolts size can vary between 7 & 8 mm and Torx size between T20 & T25.
General Door Panel Dismounting
This is a generic instruction that may vary depending on your car model.
Refer to specific car models for detailed instructions.
Installation
- Dismount the door panel carefully to access the existing tweeters.
- Change the tweeters by following the provided manual and connecting the new tweeters.
- Install the crossover as instructed to enhance the sound quality.
- Reassemble the door panel securely after completing the installation.
Cable Adaptor
Use the provided tweeter adaptor cables marked with TW-A and TW-B for
proper connection.
Running-in Time
Allow some running-in time for the tweeters to optimize performance.
DLS Support
If you encounter any issues or need assistance, contact DLS support for
help.
Frequently Asked Questions (FAQ)
-
Q: Do I need professional help for installing the tweeters?
A: While it’s recommended to have experience in car audio installations, you can seek help from an experienced installer or car audio dealer if unsure. -
Q: What is included in the box?
A: The box includes 2 tweeters, 2 crossovers, adhesive foams, terminal crimp connectors, tweeter adaptor cables, a pry tool, and the manual.
Welcome to DLS!
Thank you for buying a DLS Cruise CRPP-VO2.14/18. For us, it’s all about the
sound experience. We care deeply about sound and construction quality. In
order for your experience to be as optimal as possible, it is important that
you read this manual, preferably before you start your installation. Keep the
manual in a safe and accessible place for future reference.
Your tweeters must be installed correctly in order to work as intended. Make
sure you have all necessary tools nearby before starting and that you are
completely confident in how to proceed. If you feel the slightest uncertainty;
feel free to take the help of an experienced installer or a car audio dealer.
Warranty
This tweeter is covered by warranty, depending on the conditions in the country where it is sold. If the tweeter is returned for service, please include the original dated receipt with the product.
General
Some sound systems may vary in size of the installed tweeters. Make sure that
your vehicle has the same size as this tweeter, before you start the assembly.
This is a generic mounting instruction. The approach is similar to all of the
described car models. Some screws and clips may be placed differently
depending on your car model.
DECLARATION OF CONFORMITY
DLS Cruise tweeters for vehicles are manufactured in accordance with the EU directive EEC 95/54 (72/245/ EEC) and are marked with the approval number. They are also marked in accordance with the WEEE-directive 2012/19/EC. The products are also produced in accordance with the EU RoHS directive 2015/863/EU.
DLS speakers are engineered by DLS Sweden, a part of:
Winn Scandinavia AB
Elementvägen 15 – SE-702 27 Örebro – Sweden Tel: +46 19 20 67 65 – E-mail:
info@dls.se www.dls.se
Designed & Sound tuned in Sweden.
Included parts
Included products:
- 2pcs Tweeters
- 2pcs Crossovers
Included in box:
- 4pcs Adhesive foams for wrapping
- 4pcs Terminal crimp connectors
- 2pcs Tweeter adaptor cable bar ends (marked with TW-A)
- 2pcs Tweeter adaptor cable (marked with TW-B
- 1pc Pry tool
- 1pc Manual
Pre installation
Disconnect Battery
Before you start the process of replacing speakers, disconnect and secure the
negative terminal from your battery/power source. This will prevent the risk
of damaging yourself or the products.
Place the disconnected terminal in a secure and isolated location away from
any possible connection belonging to the battery/power source system.
Mounting info
Some sound systems may vary in size of the door speaker. Make sure that your vehicle has the same speaker size as this speaker, before you start the assembly
- Bolts size can vary between 7 & 8 mm
- Torx size can vary between T20 & T25
General door panel dismounting
This is a generic mounting instruction. The approach is similar to all of the described car models. Some screws and clips may be placed differently and depending on your car model (see specific car models on the following page).
Installation
Dismount door panel
Dismount the door by removing the cover of the door panel.
Hint: Use plastic PRY tools to avoid marks on the panels or damaging the
plastic clips.
XC90
- Remove the cover behind the door handle. Use PRY tool. Behind the cover are two T20/T25 screw. Unscrew them. Move the door panel upwards.
Hint : Sometimes it’s easier to remove the window control panel and unplug the harness, before lifting up the door panel.
S90/V90
- Remove the trim panel by using a PRY tool. Start at 1) and move towards 2).
- Behind the trim panel are two 7mm bolts located. Remove screw.
-
- Remove the window control panel using PRY tool. Unplug the harness. T20/T25 screw is located under the panel. Remove screw.
-
- T20/T25 screw can be seen from under the arm rest, or there can be a cover that needs to be removed.
Move the door panel upwards.
Remember: Use the PRY tools to avoid marks on the panels or damaging the plastic clips.
S60/V60
-
Remove the window control panel with PRY tool.Behind the control panel is one T25 screw located. Unscrew it. Unplug the harness.
Start by removing the cover by the speakers. Use a PRY tool. -
Start in the inside of the cover. Work your way towards the door handle.
-
Push the trim in the direction of the arrow. (There is a hook behind the trim)
Behind the trim is a 7mm bolt. Unscrew the bolt. Unplug the harness. -
Under the armrest is one T25 screw. Unscrew it. Move the door panel upwards.
XC60
- Remove the window control panel with PRY tool. Behind the control panel is one T20/T25 screw located. Unscrew it. Unplug the harness.
- Under the arm rest is one T20/T25 screw. Remove the cover. Unscrew it.
- At the bottom of the panel is a 7 or 8mm bolt. Unscrew it.
Move the door panel upwards.
XC40
- At the bottom of the panel are two 7 or 8mm bolts. Unscrew them.
- Under the arm rest are two T20/T25 screw. Unscrew them.
- Behind the door handle is a rubber cover. Remove cover and under it is a 7 or 8mm bolt. Unscrew the bolt.
Move the door panel upwards.
Hint: Sometimes it’s easier to remove the window control panel and unplug the harness, before lifting up the door panel.
There are several electric and mechanical connectors on the backside of the door panel. Disconnect the cables to the door handle, speaker, window control and door light.
Change tweeters
- Remove the tweeter by unscrewing the T20 Torx. Unplug the speaker harnesses.
- Plug in the new tweeter and the crossover, the connection cable can be used if needed. Use the OEM screws to fix the new DLS tweeter.
- Make sure to use adhesive foam pads to wrap the crossover to avoid rattle and secure the cross over to the door panel.
- Make sure that the new DLS tweeter is properly fixed and don’t touch the surrounding plastic.
HINT: DLS recommends adding sound deadning material on the door panel before the assembling.
Crossover
Reassembly door
Connect all plugs to the door cover, reconnect the unlocking device, place the
door cover from the top, by the window seal and push it gently down. Make sure
the clips are in place and can engage. Give the door panel a push by the hand
to attach to the clips. Mount and fasten all screws to the correct places.
Make sure that no screws or clips are left over.
Reconnect the battery/power source terminal.
Now it’s time to play some good music and enjoy!
Cable adaptor TW-B
Note!
Adaptor cable marked with TW-B shall be used when replacing Bowers & Wilkins
or Harman Kardon tweeter. This adaptor reverse the polarity of the signal to
the tweeter.
Running-in time
- Allow the speaker to play for at least 15-20 hours in order to perform at its possibly best. This run-in can be made with tone sweep or with just music.
- Start at a moderate volume and increase the volume step by step during the running in period. After the 15-20 hour run in session the performance and characteristics will be in the correct condition.
DLS Support
For technical assistance, ask your car audio dealer where the product was sold
or the distributor in your country. You can always contact the DLS Help desk
in Sweden at e-mail: info@dls.se. Information can also
be found on our WEB- site www.dls.se. We follow a policy
of continuous advancement in development. For this reason, all or part of the
specifications and designs may be changed without prior notice.
Specifications
Art. no CD-CRPP-VO2.14
Tweeter 1” / 25mm silk dome tweeter with accessories
RMS Power 50W
MAX Power 100W
Impedance 4 Ohm
Sensitivity 94dB 1W/1M
Freq. range 2000 – 25000Hz
Crossover High pass / 4800Hz / 12dB
| Art. no CD-CRPP-VO2.18
Tweeter 1” / 25mm silk dome tweeter with accessories
RMS Power 50W
MAX Power 100W
Impedance 8 Ohm
Sensitivity 94dB 1W/1M
Freq. range 2000 – 25000Hz
Crossover High pass / 4800Hz / 12dB
---|---
Technical specifications
- Voice Coil Material CCAW voice coil/ Aluminum former Frame Glass Fibre Reinforced ABS
- Magnet Neodymium / Copper shorting ring / Ventilated back plate
- Cone Natural silk dome with internal damping pad
- Crossover Mundorf® caps, Mox resistors, Air coil, hard wire
- Attenuation L-Pad 0/-4dB level
| Technical specifications
- Voice Coil Material CCAW voice coil/ Aluminum former Frame Glass Fibre Reinforced ABS
- Magnet Neodymium / Copper shorting ring
- / Ventilated back plate
- Cone Natural silk dome with internal damping pad
- Crossover Mundorf® caps, Mox resistors, Ait coil, hard wire
- Attenuation L-Pad 0/-4dB level
Electro-Acoustic Parameters
Re 3.4 Ohm
Fs 1950Hz
Spl 94dB 1W/1M
| Electro-Acoustic Parameters
Re 7.2 Ohm
Fs 1950Hz
Spl 94dB 1W/1M
Dimensions
Compatible car models
Product markings
- The crossed-out wheelie bin symbol means that the product, literature and packaging included must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority.
- This product has been granted with the CE certification mark to show that the product follows the health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
- DLS products complies with the relevant provisions of the RoHS Directive for the European Union. In common with all Electrical and Electronic Equipment (EEE) the product should not be disposed of as household waste. Alternative arrangements may apply in other jurisdictions.
- DLS is a global partner of the European Mobile Media Association, an organisation that focus on promoting the custom made mobile media installations to consumers.
We follow a policy of continuous advancement in development. For this reason all or part of specifications & designs may be changed without prior notice. We reserve for possible typos, factual or numeric errors that may have been printed on any products, package designs, user manuals and/or other included accessories.
DLS Sweden
info@dls.se
www.dls.se
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>