Safetrust BAB78490SUM IoT Sensor Keypad User Guide
- June 14, 2024
- safetrust
Table of Contents
Safetrust BAB78490SUM IoT Sensor Keypad
Product Information
Specifications
- Model: 8845-300
- Last Updated: November 29, 2022
In the Box
-
6-32 x .375 Phillips flat head screw – Secures the top and bottom casing together
-
6-32 x .375 Phillips machine screws – For mounting wall bracket
What You’ll Need
- A working internet connection (optional)
- Cable, 5-12 conductor (Wiegand), 4 conductor Twisted Pair Over-All Shield and UL approved, Belden3107A or equivalent (OSDP)
- Linear DC power supply
- Metal or plastic junction box
- Drill with various bits for mounting hardware
Installation
For a wall-mounted installation, follow these steps:
- Locate the electrical box which will be recessed into the wall. You will see a top and bottom metal flange with holes which is used to secure the back plate to the wall.
- Using the provided Phillips machine screws (#6-32 x .375), screw the back plate against the electrical box so that it’s flush.
- Connect the wires as per the wiring table provided.
- Once the back plate has been fitted and the wiring is complete, insert the top casing onto the bottom casing.
- Complete the hardware installation by fixing the screw (#6-32 x .375 Phillips flat head screw) to the top and bottom casing.
Wire Colors
- Ground Relay In Relay Out Red LED Tamper Green LED Wiegand D0/Data Wiegand D1/Clock/F2F
- 12VDC OSDP TX+ / RS-485(A) / D0 OSDP TX+ / RS-485(B) / D1
- Beeper Black Grey Blue Brown Purple Orange Green White Red Aqua Pink Yellow
- Low voltage
Configuration
- Open the Safetrust Wallet APP and select the Manage Sensor tab. Make sure your system admin has set you up with this role.
- With the Admin Installer tab open from the App, bring the phone in range of the IoT Sensor and once visible from the App, highlight and select Configure.
- When the IoT Sensor information is saved successfully to
Credential Manager and assigned to the Identity System, the new description will appear in the Manage Sensor tab with a unique serial number assigned.
Testing
LED Ring:
- Solid red: Indicates idle mode
- Flashing red: Powering up
- Solid green: Success
- Flashing green: Credential is read and access is granted
Regulatory
- Contact Safetrust Inc. for regulatory information.
Support
- Contact Safetrust Inc. for support inquiries.
FAQ
Q: Do I need an internet connection to use this product?
- A: A working internet connection is optional for this product.
In the box
What you’ll need
- A working internet connection (optional)
- Cable, 5-12 conductor (Wiegand), 4 conductor Twisted Pair Over-All Shield and UL approved, Belden3107A or equivalent (OSDP)
- Linear DC power supply
- Metal or plastic junction box
- Drill with various bits for mounting hardware
Installation
- For a wall-mounted installation, locate the electrical box which will be recessed into the wall. You will see a top and bottom metal flange with holes which is used to secure the back plate to the wall.
- Using the Phillips machine screws provided (#6-32 x .375”) screw the back plate against the electrical box so that it’s flush.
- The next step is to connect the wires as per the wiring table above.
- Once the back plate has been fitted and the wiring is complete, the top casing can be inserted into the bottom casing as shown above.
Configuration
- Open the Safetrust Wallet APP and select the Manage Sensor tab. Make sure your system admin has set you up with this role.
- With the Admin Installer tab open from the App, bring the phone in range of the IoT Sensor and once visible from the App, highlight and select “Configure”.
- Choose an Identity System.
- Specify the Type of access from the dropdown (eg. Door, Gate, etc.)
- Assign a short Name and Description using alphanumeric characters.
- Choose an Output for the sensor (the default is set to Wiegand).
- When the IoT Sensor information is saved successfully to Credential Manager and assigned to the Identity System, the new description will appear in the Manage Sensor tab with a unique serial number assigned.
Testing
Access with cards
Access with mobile
Regulatory Information
FCC
FCC: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Canada Radio Certification: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference,
- this device must accept any interference, including interference that may cause undesired operation of the device.
CE Marking: Safetrust hereby declares that these proximity readers are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Support
- Thank you for purchasing the Safetrust IoT Sensor Keypad.
- If for any reason you need assistance with your installation, please contact your local Sales representative.
- Sincerely The Safetrust Team
- www.safetrust.com/support
- Safetrust Inc.
- safetrust.com
- sales@safetrust.com
Documents / Resources
|
Safetrust BAB78490SUM IoT Sensor
Keypad
[pdf] User Guide
DAEwlz4wO7c, BAB78490SUM, BAB78490SUM IoT Sensor Keypad, BAB78490SUM, IoT
Sensor Keypad, Sensor Keypad, Keypad
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>