Furniture of America Olala 6-Drawer Light Walnut Dresser Instruction Manual
- June 12, 2024
- Furniture of America
Table of Contents
Furniture of America Olala 6-Drawer Light Walnut Dresser Instruction Manual
TOOLS REQUIRED
-
Phillips Screwdriver
-
2 – People Recommended
ASSEMBLY RATING
The assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
CHECK BEFORE STARTING
-
Are you missing anything?
Double check all parts, hardware and accessories listed are all accounted for. -
Check out our Quick Tips!
We recommend reviewing the pre-assembly hand outs. Even experts need a refresher now and then! -
Should we send any replacements?
Are there any irregularities or flaws in the parts? We can send replacements! -
Prep Time!
Please review the assembly instructions and all diagrams poor to assembly.
PRE ASSEMBLY INTRODUCTION
We understand building ready-lo•assemble furniture can be a challenging experience for some. To help avoid contusion, we have provided some helpful lips that may speed up the process.
Teamwork
ALWAYS have at least two people b help with transporting and assembling the
product to avod potential injury and damage.
Suitable Location
Suitable Location Assenting near the area ce the intended location is highly
recommended
Sufficient Space
Make sire you nave oncugin space to mow around during the assembly
Avoid Scratches
Use cardboard Blanks or a carpeted area while assembling furniture to prevent
to prevent scratches and damages.
Flat surface
Make sure the furniture rests on a flat and level surface with each leg evenly
touching the floor.
ASSEMBLY AND CARE ADVICE
FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE.
-
Position each par cormectly and insert screws or bolts into 1helr respective holes.
-
Use the appropriate hand tools or power iools for assembly. Select steps, such as tightzning screws and for bolis, may require hand tools to avoid causing damage during assembly.
-
Tum clockwise ta tighten and only tighten when step is completed or when instructed to do so.
-
Save the Instructions and store any supplied lools for later maknisnance.
-
After two weeks, check and tighten any loose hardware and repeat agaln every six months thereafter.
IT1S THE USER’S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE HARDWARE MAY LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO SUPPORT ITS INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE SERIOUS INJURY.
DRESSER
- Please keep Instructions for future referance.
- Check the quantity and wragularity of parls and hardware balore you starl
PARTS
HARDWARE
Anti-dumping hardware kit
ASSEMBLY INSTRUCTIONS
Remove handles from within the drawers and attach to the front.
Wall Mounting and Fixing
EXPANSION WALL ANCHOR
Our provided expansion wall anchors are only suitable for masonry walls. Such
as drywall plaster or concrete and are best for holding lightweight itens or
for ante tip prevention. If you are unsure of the correct wall anchor to use
with the product please request professional gidance. Liability for product
damage or failure due to using the incorrect will fall on the installer.
CHECK BEFORE PROCEEDING
Prior to drilling or hammering please check for wires or pipes. We recommend
using a stud finder to locate a stud, which will other more appropriate
resistance and hold more weight.
QUICK TIPS
-
If unsure of the proper size, always choose a larger screw and wall anchor.
-
Match the drill bit to the wall anchor and hole size.
-
Only drill horizontally. Do not force the drill or enlarge the hole for the wall anchor.
-
Take extra care when drilling into high walls or ceramic tiles. Wall anchors should be a tight fill for the hole Never use wall anchors in ceilings.
Maintenance
We recommend a yearly check to see if the wall anchor or screw has loosened. If so please remove the existing wall anchor and screw and use a new anchor.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>