Furniture of America IDF-OA1863GY Limewood 29 Gal Gray and White Outdoor Trash Instruction Manual

Furniture of America IDF-OA1863GY Limewood 29 Gal Gray and White Outdoor

Trash

TOOLS REQUIRED

2 – People Recommended

ASSEMBLY RATING

EASY——DIFFICUL T
The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.

BEFORE STARTING

• Are you missing anything?
  Double-check all parts, hardware and accessories listed are all acccounted for.

• Check out our Quick Tips!
  We recommend reviewing the pre-assembly handouts. Even experts need a refresher now and then!

• Should we send any replacements?
  Are there any irregularities or flaws in the parts? We can send replacements!

• Check out our Quick Tips!
  We recommend reviewing the pre-assembly handouts. Even experts need a refresher now and then!

• PrepTime!
  Please review the assembly instructions and all diagrams prior to assembling.

PRE-ASSEMBLY INTRODUCTION

We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process.

• Teamwork
  ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage.

• Suitable Location
  Assembling near the area of the intended location is highly recommended.

• Sufficient Space
  Make sure you have enough space to move around during the assembly.

• Avoid Scratches
  Use cardboard, blankets or a carpeted area while assembling furniture to prevent to prevent scratches and damages.

• Flat Surface
  Make sure the furniture rests on a flat and level surface with each leg evenly touching the floor.

ASSEMBLY AND CARE ADVICE

FAILURE TO FOLLOW THE GUIDELINES BELOW MAY (A) RESULT IN INJURY AND/OR PROPERTY DAMAGE.

• Position each part correctly and insert screws or bolts into their respective holes.
• Save the instructions and store any supplied tools for later maintenance.
• Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and/or bolts, may require hand tools to avoid causing damage during assembly.
• Turn clockwise to tighten and only tighten when step is completed or when instructed to do so.
• After two weeks, check and tighten any loose hardware and repeat again every six months thereafter.

TRASH CAN

• Please keep instructions for future reference.
• Check the quantity and irregularity of parts and hardware before you start .

IT IS THE USER’S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE HARDWARE MAY LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO SUPPORT ITS
INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE SERI OUS INJURY.

PART

HARDWARE

ASSEMBLY INSTRUCTIONS

1. Part #1) x1pc
   Part (2) x1pc
   Part 43 ×1pc
   Hardware#A) ×4pcs
   Hardware#B) ×1рс
   Hardware#C) ×4pcs
   Align panels (#1,2,3) together, then secure by using bolts (#A) with washers (#C).

2. Part #1 x1pc
   Part f2 x1pc
   Hardware#A) x8pcs
   Hardware #B)х1рс
   Hardware #C x8pcs
   Align panels (#1,2) to the frame, then secure by using bolts (#A) with washers (#C).

3. Part8 x1pc

4. Part@ x1pc

ASSEMBLY COMPLETED

Please ensure the furniture rests on an even and flat surface. If the product wobbles or feels loose, double-check all bolts and/or screws are properly tightened and secured.

Keep this handy!
Please retain this instruction manual and any order-related information for future reference.
Lift, don’t drag!
To avoid damage to product please always LIFT the product when transporting of adjusting the placement.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>