Furniture of America IDF-6081-CH-PM Lindros Black Faux Leather Power Recliner Instruction Manual
- October 30, 2023
- Furniture of America
Table of Contents
Furniture of America IDF-6081-CH-PM Lindros Black Faux Leather Power
Recliner
CHECK BEFORE STARTING
-
Are you missing anything?
Double-check all parts, hardware and accessories listed are all accounted for. -
Should we send any replacements?
Are there any irregularities or flaws in the parts? We can send replacements! -
Check out our Quick Tips!
We recommend reviewing the pre-assembly handouts. Even experts need a refresher now and then! -
Prep Time!
Please review the assembly instructions and all diagrams prior to assembling.
PRE ASSEMBLY INTRODUCTION
We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process.
Teamwork
ALWAYS have at least two people to help with transporting and assembling the
product to avoid potential injury and/or damage.
Suitable Location
Assembling near the area of the intended location is highly recommended.
Sufficient Space
Make sure you have enough space to move around during the assembly.
Avoid Scratches
Use cardboard, blankets or a carpeted area while assembling furniture to
prevent to prevent scratches and damages.
Flat Surface
Make sure the furniture rests on a flat and level surface with each leg evenly
touching the floor.
ASSEMBLY AND CARE ADVICE
FAILURE TO FOLLOW THE GUIDELINES BELOW MAY (A) RESULT IN INJURY AND/OR PROPERTY DAMAGE.
-
Position each part correctly and insert screws or bolts into their respective holes.
-
Save the instructions and store any supplied tools for later maintenance.
-
Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and/or bolts, may require hand tools to avoid causing damage during assembly.
-
Turn clockwise to tighten and only tighten when step is completed or when instructed to do so.
-
After two weeks, check and tighten any loose hardware and repeat again every six months thereafter.
IT IS THE USER’S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE HARDWARE MAY LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO SUPPORT ITS INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE SERIOUS INJURY.
CHAIR
- Please keep instructions for future reference.
- Check the quantity and irregularity of parts and hardware before you start .
PARTS
HARDWARE
ASSEMBLY INSTRUCTIONS
- insert Back Cushion (#1) unto Seat (#2) I
- Align and attach Left Ear (#3) and Right Ear (#4) to Back Cushion (#1)
- Connect Plug (#A) to Transformer (#B) I
ASSEMBLY COMPLETED
Please ensure the furniture rests on an even and flat surface. If the product
wobbles or feels loose, double-check all bolts and/or screws are properly
tightened and secured.
-
Keep this handy!
Please retain this instruction manual and any order-related information for future reference. -
Lift, don’t drag!
To avoid damage to product please always LIFT the product when transporting of adjusting the placement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>