beebobox NEEKO2 True Wireless Stereo Headset Instruction Manual
- June 13, 2024
- beebobox
Table of Contents
True Wireless Stereo Headset
Product Operation Instruction
PRODUCT APPEARANCE
Note: The picture is only for reference, please make the object as the standard.
PRODUCT PARAMETERS
| Model: | NEEKO 2 |
|---|---|
| FCC ID: | 2BAP5-NEEKO2 |
| Wireless Version: | Wireless V5.3 |
| Channel system: | Two-Channel/Master-slave switching |
| Working time: | Approx. 6 hours (headphones), Approx. 18 hours (charging case) |
| Function operation: | Smart touch |
| Product type: | TWS wireless headset |
| Voice recognition: | Wireless voice assistant |
| Access distance: | >10M |
| Microphone: | Silicon microphone ENC (call noise cancellation) |
| Input: | 5V/200mAh (headphones) 5V/1Ah (charging case) |
OPERATING INSTRUCTIONS
Led indicator status
- Single headset pairing status: red and blue light flashing;
- TWS double headset pairing success: main headset red and blue light flashing;
- TWS headset pairing successful in the mobile phone: blue light flashing slowly.
Touch function operation
- Pairing mode : Automatically turn into the pairing mode after turn on;
- Answer/ Hang up: Double-touch the power button to answer and hang up;
- Reject call: Press the power button for 2 seconds;
- Previous song: Long press the L side headset power button;
- Next song: Long press the R side headset power button;
- Volume +: Single-touch the R side power button;
- Volume -: Single-touch the L side power button;
- Play/Stop: Double-touch the power button to play and stop.
WARNING
Warning and precautions:
- Do not use abrasive detergent to clean the product.
- Do not let the product be heated or near the fire source, such as a cooking stove.
- Do not let this product be exposed to direct sunlight for a long time.
- Do not abandon the product into the fire to avoid the explosion.
- Do not attempt to dismantle the product to make any modifications as it does not contain any repair components.
- Do not expose this product in the rain.
- If you won’t be using this product for an extended period of time, keep it dry and charge the headphones at least once a month to prolong their lifespan and keep out dust and severe temperatures.
PRECAUTIONS FOR TRANSPORTATION
For transportation, please package products with a half charge (50-90% battery capacity). When being transported, there should be no violent vibration, shock, or extrusion, and no sunshine or rain exposure. can be used for regular transportation methods such as cars, trains, ships, aircraft, and more.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmful interference,
and This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
TWS binaural connection operation
- Please keep the distance between your earphones and your phone (or other connection device) within 1 meter.
- Open the headset charging box, (Headset will enter pairing mode immediately) and stay there for 5 seconds until the left Headset Red and Blue Lamp flashed;
- Use the wireless feature on the phone to search for the “beebobox Neeko 2” headset and click to pair it. After a successful pairing, the light of headset will go out.
Note: During call, can only use the main headset at TWS mode.
TWS charging indicator
- Blue light turns on during charging;
- The light turns off when the battery is fully charged;
- When the battery is low, the red light flashed.
Producer: Shenzhen Derivation Technology Co., Ltd
Address: Mingyuehuadu, Gonghe Industrial Road,Gongle Community, Xixiang
Street, Baoan District, Shenzhen City,Guangdong, China. Web: http://www.sz-
derivation.com
Manufacturer: Jiangxi Xinyi Zhixun Information Technology Co, Ltd
Address: Yongxin County Industrial Development Zone, Ji’an City, Jiangxi
Province
Tel: 0796-7750162
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>