MAXIM 40625 Clyde VX Large Outdoor Wall Sconce User Manual

MAXIM 40625 Clyde VX Large Outdoor Wall Sconce User Manual

Please consult a qualified electrician for hanging fixture and wiring.

Light Source : 1 X E26 Medium Base 60W (Not Included)

Made in China

Before Getting Started

• Read the instructions carefully prior to assembling the product.

• When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.

• Carefully remove all packaging materials and retain for future use.

• Keep all hardware parts and packaging out of reach of small children.

• Choose a clean, level, spacious assembly area.
  Avoid hard surfaces that may damage the product.

• Ensure that you have all required contents for complete assembly.

• Take care when lifting. Assemble the product in close proximity to where you intend to position the item.

• Do not over tighten the screws and bolts as this may damage the threads.

• Do not let children play with this product

Risk of suffocation!
Keep any packaging materials away from children.

Lamp Care Instructions

• Carefully read through the instruction sheet before assembly and using the product.
• Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
• Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Do not plug the product in if cord is torn or frayed.

****For outdoor use, caulk around fixture with silicone sealant to prevent water intrusion.

Cleaning & Maintenance

• Apply a high quality car wax to the fixture regularly to protect from environmental factors that can damage the metal.

• Clean with soft cloth and a mild detergent.
  DO not use abrasive cleaner.

• Periodically (every 90 days) make sure that the screws are fully tightened.

• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

Content

Before getting, started, ensure the package contains the following components:

A|

FIXTURE

| x1
---|---|---
B|

SCREW 8/32*25mm

| x2
C|

GLASS

| x1
D|

SOCKET CUP

| x1
E|

WIRE NUT

| x3

Assembly Instructions

1. This step requires removing the mounting plate from the fixture.

2. Caulk around backplate where fixture meets the wall leave a hole at the bottom to allow water to escape.
   

3. 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>