SPYDER ALT-YD-JW19-SEQ-All Black Sequential Fiber Optic LED Tail Lights Installation Guide
- June 3, 2024
- SPYDER
Table of Contents
INSTALLATION GUIDE:
ALT-YD-JW19-SEQ-(All)
ALT-YD-JW19-SEQ-All Black Sequential Fiber Optic LED Tail Lights
Tools Needed:
- ¼” ratchet
- 10mm socket
- Panel popper
- Phillips screwdriver
1. Remove the plastic cover using a panel popper.| 2. Remove the 10mm tail
light retainer.
3. Unseat the tail light.| 4. Disconnect wire harness clip.
5. Remove (3x) Phillips screws securing the bracket to the old tail light.|
6. Carefully remove bracket from tail light.
7. Place the bracket on the Spyder tail light and install (3x) Phillips
screws.| 8. Clip Spyder wire harness connector ontobracket.
8. Connect the wire harness.| 9. Seat Spyder tail light.
10. Reinstall the 10mm tail light retainer.| 11. Reinstall plastic cover.
12. Turn on the lights and confirm all functions are working properly. You have successfully completed the installation of your new Spyder LED tail lights.
DISCLAIMER
Spyder Auto Installation Guide is not liable for damages, injuries, and death while installing the product. This is intended to be an installation guide, to reduce installation time. We have no responsibility for improper installation. If you do not know how to install it, please have a professional install it.
For further help with installation, please watch our installation
video.
Follow the direct link below to our YouTube channel for more
information:
http://www.youtube.com/watch
Documents / Resources
|
SPYDER ALT-YD-JW19-SEQ-All Black Sequential Fiber Optic LED Tail
Lights
[pdf] Installation Guide
ALT-YD-JW19-SEQ-All, Black Sequential Fiber Optic LED Tail Lights, ALT-YD-JW19
-SEQ-All Black Sequential Fiber Optic LED Tail Lights, Sequential Fiber Optic
LED Tail Lights, Fiber Optic LED Tail Lights, Optic LED Tail Lights, LED Tail
Lights, Tail Lights
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>