VEVOR XC-100L Refrigerated Display Case Instruction Manual
- May 15, 2024
- VEVOR
Table of Contents
VEVOR XC-100L Refrigerated Display Case
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instruction scare fully before operating. VEVOR reserves a clear interpretation o four user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Warning-To reduce the risk of injury, user must read instructions manual carefully.
General
- Top brand fully enclosed compressor is used on the desk-top refrigerator. The refrigerant R290 is of an environmentally friendly agent. It features a rational configuration of refrigeration system with blower forced air cooling. The temperature is quite even inside the refrigerator.
- Double hollow transparent glasses are used on door and body. It features an artistic and elegant appearance, perfect perspective and easy access.
- It has a wide application in department store and house as well as the meeting room and sitting room
Structure and Parts
Handle and Erection
Handle with care
Unplug the wall socket first. Never tilt it over 45 degree during handling|
---|---
Dry place
Always locate the refrigerator at a dry place.|
Well ventilation
Always locate the refrigerator at a place with fine ventilation. For the first
time use, wait for 2 hours after handling and then plug the wall socket and
start it.|
Far from heat source
Never place the refrigerator directly under the sunshine .Never locate it
nearby any heat source or heater to prevent it from reducing refrigeration
capability.|
No heavy load
Never put any heavy load on the top of the refrigerator.|
No hole making
Never make hole on the refrigerator. Never install other matter on the
refrigerator.|
Stable location
Unpacking and locate the refrigerator on a flat and solid place.|
Preparation and Power Supply
Exclusive power socket
Normally, the power supply should be 110-120V, single phase AC with exclusive
single phase three pin receptacle (125V 16A) and fuse(6A).The power receptacle
must have a reliable earth connection.
No share on socket
Never let the refrigerator share the common socket with other appliance,
otherwise the cable becomes hot and fire might be resulted.|
---|---
Protect cables
Never break or damage the cables otherwise current leakage and fire might be
resulted.|
No water flushing
Never give the refrigerator surface a flush otherwise current leakage might be
resulted.|
Prevent from flammables and explosive
Never put any flammable or explosive inside the refrigerator such as ether,
gasoline, alcohol, adhesive and explosive. Never put dangerous product nearby
the refrigerator.|
No spray
To spray the flammables such as paint or coating nearby the refrigerator is
not allowed, otherwise fire might be resulted|
After power break
After power break or unplugging the refrigerator, always wail at least 5
minutes and then you may plug the refrigerator and start it again.|
No medicine
No medicine is allowed to keep inside the refrigerator.|
Use and Caution
-
Before use:
Plug the refrigerator on 110-120V~ exclusive socket. After the refrigerator running, put hand on the air suction to confirm it is sufficient cold. Then you may put food inside the cold box. -
Digital Temperature controller
Features Of Function
– It is a mini-sized and integrated intelligent controller and applicable to the compressor of one Hp. The main functions are: Temperature Display/Temperature Control/Manual, automatic defrost by burning off/Illumination Control/Value Storing/self Testing/parameter Locking
Front Panel Operation -
Set temperature Press “set” button, the set temperature is displayed.
Press or button to modify and store the displayed value. Press “set” button to exit the adjustment and display the cold-room temperature. -
If no more button is pressed within 10 seconds, the cold-room temperature will be displayed.
-
Illumination: Press button, it lights; Press again, it stops. Manual start/stop defrost: Press button and hold for 6 seconds to defrost or stop defrost.
-
Refrigerant LED: During refrigeration, the LED is on; When the cold room temp. is constant, the LED is off; During the delay start, the LED flashes.
-
Defrost LED: during defrosting, the LED is on; When is stops defrosting, the LED is off, During the delay display of defrost, the LED flashes.
-
“Turbo” function: long press for 3 seconds, the compressor is forced to start for 2 hours, directly enter the defrost after 2 hours; under the forced cooling state, long press for 3 seconds to exit forced cooling.
-
Cautions
Shorten the door open time and reduce open frequency is good to keep a cold temperature inside the refrigerator. Never block the air suction and outlet. Keep air circulation and refrigeration capability. Do not make food congested as it will influence the cooling effect. Adjust the rack height for proper food storage. Cool the hot food down to room temperature before you put it into the refrigerator. Try to reduce the open times and keep refrigerator inside cold in case the power is cut off. Only skilled service man is allowed to repair the damaged power cable with special tools. Never touch compressor to avoid from scald. This appliance is not intended for use by persons (including children)with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
The operation manual are not suitable for the persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. The maximum loading of the Shelf does not exceed 10 kg. The climatic class of the appliance is 4,the Units are suggested to be used at 16℃-32℃ ambient temperature.
WARNING
Keep clear of obstruction all ventilation openings in the appliance enclosure or in the structure for building-in Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer Do not damage the refrigerant circuit Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer
Maintenance
-
Notice
Often keep the refrigerator clean and periodical maintenance is necessary. Always unplug the socket before maintenance Never use damaged plug or loose socket to prevent from electric shock or short circuit. Never flush the refrigerator. Never use alkali detergent, soap, gasoline, acetone or brush. -
Clean outside
Dip soft cloth in neutral detergent(tableware detergent) to clean the outside of the refrigerator and then wipe it with dry soft cloth. -
Clean inside
Take rack out for cleaning with water -
Shut down refrigerator for a long time
Take all food out and unplug the wall socket. Clean both inside and outside of the refrigerator thoroughly and open the door for sufficient dry. The glass breaks easily. Keep the glass far from children. Clean the condensate tray and wipe it dry .
Trouble Shooting
Trouble
|
Cause and Remedy
---|---
No refrigeration
| Is the plug in socket well?
Is the fuse broken?
Is there no power?
Unsatisfactory refrigeration
| s it under the sunshine? Is there any heat source nearby?
Is the surrounding ventilation bad?
Does the door close well? Does door open for a long time?
Is the door seal strip deformed or damaged? Is food congested or too much?
Does food block the air suction or outlet? Regulate the temperature
controller.
Much noise
| The refrigerator does not level. The refrigerator contacts wall or other
matter. There is loose part in refrigerator.
Contact local service agent for help if simple trouble shooting does not solve
the problems.
Note: Following phenomena are not troubles
The murmur of water is heard when the refrigerator is working. It is a normal
phenomenon as the coolant is circulating in the system.
In wet season, condensation might be found on the out side of the
refrigerator. It is not a trouble, which is caused by high humidity. Simply
use cloth to wipe it.
Principle of Refrigeration System
The principle of compression refrigeration consists of “compression”, “condensation”, “throttling” and “vaporization”. The compression is undertaken by compressor, the condensation is completed by condenser, the throttling valve is executed by capillary and the vaporization is implemented by evaporator. When the coolant is circulating in the closed refrigeration system, the compressor sucks coolant, which has absorbs heat in evaporator, the coolant becomes a high pressure and hightemperature gas. In condenser, it dissipates heat in air, while the coolant is re-liquefied and throttled in capillary and then enters into evaporator with low pressure. The liquefied coolant quickly boils and vaporizes in togas when the pressure suddenly drops. Meanwhile, it absorbs heat inside the refrigerator. And the compressor sucks the low pressure and low temperature gaseous coolant,……….It is circulating in this way up to realization of intended refrigeration.
Circuit Diagram
Major Parameters
Model
|
XCW-100L
---|---
Coolant and injection quantity for
NUT45NR
|
R290(1.1oz)
Kind of weather
|
4
Refrigeration temperature(℃)
|
2-8
Electric shock protection class
|
I
Rated Voltage(V)
|
115～
Rated Frequency(Hz)
|
60
Rated Current (A)
|
2.1
Power (W)：
|
176
Total effective volume(L)
|
100
Net weight (kg)
|
38.9
Overall dimension(mm)
|
682x450x675
Note:
- The electric circuit diagram and parameters on the product name plate are final ones if they have been changed.
- The design might be improved without notice.
- The product is serve as a counter for transactions between sales personnel and customers, the door is in the back of the appliance and needs to be used by the sales staff, so that the sales staff can provide goods to consumers.
- f the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Warning : Risk of fire / flammable materials
Warning: Refrigerant is facility burning of R290, please protect against
fire
Meaning of crossed out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact you local government for information
regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging
your health and well-being. When replacing old appliances with new ones, the
retailer is legally obligated to take back your old appliance for disposals at
least free of charge.
Made In China
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
Customer Support
Technical Support and E-Warranty Certificate www.vevor.com/support
