vetus OBC115A Hydraulic Steering Cylinder For Outboard Engines User Manual
- May 15, 2024
- vetus
Table of Contents
vetus OBC115A Hydraulic Steering Cylinder For Outboard Engines
Safety
Warning indications
The following warning indications are used in this manual in the context of
safety:
Danger
Indicates that great potential danger exists that can lead to serious injury
or death.
Warning
Indicates that a potential danger that can lead to injury exists.
Caution
Indicates that the usage procedures, actions etc. concerned can result in
serious damage to or destruction of the engine. Some CAUTION indications also
advise that a potential danger exists that can lead to serious injury or
death.
Note
Emphasizes important procedures, circumstances etc.
Symbols
Indicates
that the relevant procedure must be carried out.
Indicates that a particular action is forbidden.
Share these safety instructions with all users.
General rules and laws concerning safety and accident prevention must always
be observed.
Warning
This product should only be operated by persons who have read and understood
the instructions and precautions in this manual. Failure to follow the
instructions in this manual may result in serious injury or property damage.
The manufacturer shall not be liable for any damages resulting from improper
operation.
Introduction
This manual provides guidelines for the use of the OBC115A and OBC250A
hydraulic steering cylinder for outboard engines.
A hydraulic steering system for outboard engines consists of the following
basic components:
- Steering cylinder
- Steering pump
- Hoses
- Steering wheel
Warning
Unauthorised modifications exclude the factory’s liability for any resulting
damage.
Operation
Turn the steering wheel (gently) in the desired direction. If necessary,
practice sailing forwards and backwards in a safe location.
Maintenance
The outside of the hydraulic steering system must be cleaned after every use. It is very important to clean the steering system, as it is considered a part of your safety equipment. Use water and (mild) soap for washing.
Check the following points regularly:
- Steering pump oil level.
- Steering response when turning the steering wheel.
- Steering hoses and connections (damage, wear and leaks).
- Condition of all fasteners.
- Signs of corrosion.
- Condition of hydraulic oil (flush if necessary).
- Damage/corrosion of the piston rod. Grease if necessary.
Warning
Have maintenance and repairs carried out by a competent company.
CUSTOMER SUPPORT
Fokkerstraat 571 – 3125 BD Schiedam – Holland
Tel.: +31 (0)88 4884700
sales@vetus.com
http://www.vetus.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>