SYMA X660 Remote Control Drone User Manual
- June 13, 2024
- SYMA
Table of Contents
- SYMA X660 Remote Control Drone
- Product Description
- Important Safety Information
- Safety Guidelines
- Repair and maintenance
- Product Description
- Package contents
- Drone Battery Charging
- Flight Guide
- Smart Flight Feature
- Product Feature
- Troubleshooting
- Product Accessories
- FCC Notice
- WARRANTY
- Documents / Resources
SYMA X660 Remote Control Drone
Product Description
The X660 Remote Control Drone is a high-quality drone designed for recreational flying. It comes with a remote control for easy operation.
Specifications
- Drone Brand Name: SYMA
- Model/ITEM NO.: X660
- Drone weight: [insert weight]
- Drone size: [insert size]
- Range: [insert range]
- Motor: [insert motor details]
- Battery capacity: [insert battery capacity]
- Charging time: [insert charging time]
- Flight time: [insert flight time]
Drone Diagram
[Insert drone diagram here]
Remote Control Diagram
[Insert remote control diagram here]
Drone Battery Charging
- Connect the USB Type-C charging cable to the drone’s charging port.
- Connect the other end of the charging cable to a 5V/1A adapter (not included).
- The red light on the drone will turn on to indicate that it is charging.
- When the battery is fully charged, the red light will turn off.
- Use only the provided USB charging cable and avoid using adapters with a smaller rated current to ensure faster charging.
Remote Control Use
To use the remote control:
- Open the battery cover on the back of the remote control.
- Install 4 AAA batteries correctly according to the electrode instructions of the battery box (batteries need to be purchased separately).
- Make sure the polarity of the batteries matches the polarity of the battery box.
- Do not use new and old batteries together.
- Do not use different types of batteries together.
- Do not use rechargeable batteries.
Flight Guide
Flight Preparation
To pair the drone with the remote control:
- Turn on the power switch of the remote control.
- [Insert remaining flight preparation steps here]
Important Safety Information
Thank you for purchasing this SYMA product. To ensure that you operate the drone correctly and conveniently, please read these instructions carefully before first use and store them safely for future reference.
- To protect the legitimate rights and interests of users, please be sure to read the contents of this manual carefully before using this product.
- When using this product, please be sure to strictly observe and perform the requirements, including but not limited to the instructions and safety guidelines. For any personal injury, accident, property loss, legal dispute, or any other adverse event causing a conflict of interest resulting from the use of the product or any irresistible factors that violate the safety instructions, the user shall bear the related responsibilities and losses. Syma will not take any responsibility.
- Once you start using the product. You are deemed to have read, understood, recommended, and accepted the terms and contents of the instructions (including disclaimers, safety instructions, warning instructions, etc) included with this product.
- In case you are having challenges with any aspect of the product, may it be operation or maintenance, please get in touch with our customer service directly.
Safety Guidelines
- Please store the smaller-sized drone accessories in places that are out of reach of children.
- For all first-time flights, the left joystick must be slowly pushed up in order to prevent the drone from ascending too fast to avoid unnecessary collision and possible damage and injury.
- When the flight is ended, first turn off the power of the remote control. Then turn off the power of the drone.
- Avoid placing the batteries in places with high temperatures and exposure to heat.
- Take extra precautions to ensure that the drone is at a minimum distance of 15 feet from the pilot, other people, and animals in order to prevent bodily injury during flight operations. A minimum separation distance of 20 cm must be maintained between the user’s body and the device under normal use conditions.
- Children under the age of 8 must be instructed in the correct and safe operation of the drone by an adult.
- Children must be under adult supervision when using this drone.
- Non-rechargeable batteries are not to be recharged; Batteries are to be inserted with the correct polarity; Different types of batteries or new and used batteries must not be mixed.
- The supply terminals can not be short-circuited.
- Discharge the battery to 40%-50% (On a full charge, fly for half of the total flight time) if it is not used for 10 days or more, this can greatly extend the battery life.
- Please keep a safe distance from the spinning propellers to avoid injury.
- To ensure the electromagnetic environment requirement of the aviation radio (station), using remote controls in the zone, which is in a radius of about 5000m zones from the circle center of the airport runway, is forbidden. All users also should abide by the radio regulation set forth by the government and regulatory agencies including the duration and area.
- Only uses the recommended transformer for the model, and the transformer is not a toy. Check the cord, plug, enclosure, and other parts of the transformer regularly. If any damages have been discovered, please immediately stop using it, until it is completely repaired.
- Never look steadily at the laser beam since the laser radiation can cause harm.
- NOTE : Assemble the drone under adult supervision.
- The pilot is responsible for the safe operation and safe distance from uninvolved persons and property on the ground and from other airspace users and shall never fly the drone above crowds (> 12 persons).
- The packing has to be kept since it contains important information.
- It is strongly recommended to fly in areas without airflow. Do not fly in areas with an air conditioner/electric fan or table lamp, or other electrical equipment that may be easily damaged.
- Use only the supplied charging cable.
- Chargers used with the drone should be examined regularly, such as the cord, plug, enclosures, and other parts. In case of any damages are found, please stop using it unless it is repaired or replaced.
- Do not touch the rotating rotor, avoid loose clothing or hair that could be caught in the rotor, and do not fly near the face
Repair and maintenance
- Use a dry and soft cloth to clean the product.
- Do not expose the product to extreme heat or direct sunlight.
- Do not immerse the product in water as this may damage the electrical components.
- Please check the blades, motors, and batteries regularly. In case of any damage is found, please stop using it unless it is repaired or replaced.
Product Description
Specifications
Package contents
Drone Diagram
- Propeller protector
- Propeller
- Motor
- Power switch
- USB Type-C Charging port
Remote Control Diagram
Drone Battery Charging
Note:
- Charge the drone with the USB charging cable that came with the product.
- The battery will take longer to charge when you use an adapter with a smaller rated current.
Important: Battery Charging Information
- Rechargeable batteries should only be charged under adult supervision.
- Caution: Risk of explosion if the battery is replaced with incorrect ones. Please dispose of the batteries according to the instructions.
- Don’t use or place batteries near heat sources such as fires or heaters.
- After flying, do not charge the battery immediately to avoid overheating and potential fire hazards. Ensure that the battery cools down before charging.
- Don’t hit or drop the battery when charging to avoid an internal short circuit.
- Only use the supplied charging cable for charging. If the battery is aging, please replace it with a new battery in time.
- After fully charged, please remove the adapter in time, otherwise, the battery will be discharged and recharged, which will shorten the battery life.
- The toy is only to be connected to Class II equipment bearing the symbol:
Remote Control Use
- Remote control battery installation: Open the battery cover on the back of the remote control, and install 4*AAA batteries correctly according to the electrode instructions of the battery box(battery needs to be purchased separately)
Note:
- When installing the battery, please make sure that the polarity of the battery matches the polarity of the battery box. Batteries must not be installed with reversed polarity.
- Please do not use new and old batteries together.
- Please do not use different types of batteries together.
- Do not use rechargeable batteries.
Flight Guide
Flight Preparation
Pairing the drone with the remote control
- Turn on the power switch of the remote control.
- Push the power switch on the aircraft’s body to the “ON” position.
- Push the left joystick (throttle) fully up and down. The indicators on the drone and remote will change from flashing to solid, indicating that the drone is in flight-standby mode.
Level calibration
- Place the drone on a level surface and move the left and right joysticks to the lower right corner for about 3 seconds. The indicator will flash rapidly and then stay constant,which indicates that the calibration process is complete.
- The drone cannot be calibrated if the inclination angle is greater than 10 degrees.
Pre-flight preparation
- Push the left joystick fully up and return to the center. The propeller will begin to rotate.
- Push the left and right joysticks downward in a V shape for 2 seconds. The propeller will begin to rotate.
- Press the one key take-off/landing button. The propeller will begin to rotate then the drone will automatically take off and hover at a fixed height.
Shutdown pre-flight preparations
- Push the left joystick downward for 2-3 seconds to stop the propellers.
- Push the left and right joysticks downward in a V shape for 2 seconds to stop the propellers.
- Press the one key take-off/landing button. The drone will slowly descend to the ground and the propellers will stop spinning.
Note:
- The drone will switch off automatically if its angle of inclination exceeds 90 degrees.
- If the drone is flown out of range from the remote control, the drone indicator light will start to flash and the drone will land automatically.
- If the remote control loses power or turns off during flight, the drone will automatically initiate a landing procedure and come to a stop. Once the remote control is turned back on, the user will regain control of the drone.
Flight Control Trimming
- Trimming forwards and backwards
- The end with the red light is the front.
If the drone automatically moves forward/backward while hovering, during
hovering you can adjust the movement by holding down the left joystick and
push the right joystick to the opposite direction (backward/forward). Continue
adjusting until the drone is stable, then release the fine-tuning button.
If the drone automatically fly to the left/right while hovering, during
hovering you can hold down the left joystick and push the right joystick to
the right/left direction to adjust the drone’s flight until it stabilizes. Then
you can release the trim button.
If the aircraft automatically rotates to the left/right while hovering, during hovering you can hold down the left joystick and push the left joystick to the right/left direction to make adjustments. When the drone is stable, you can release the trim button.
High/low-speed modes Short press the right joystick to switch between high-speed mode and low-speed mode.
- The default mode upon powering on is slow speed mode.
- The remote controller emits two “beeps” for high-speed mode and one “beep” for low-speed mode.
Smart Flight Feature
front/back or left/right rolling (The end with the red light is the front)
Hold the flip button on the remote control and push the right joystick
forward/backward/left/right, the aircraft will quickly roll over in the
corresponding direction.
Diagonal rolling (The end with the red light is the front) Short press the flip
button on the remote control once and quickly hold it again and push the right
joystick to the upper left/upper right/lower left/lower right direction, the
aircraft will quickly roll over in the corresponding direction.
Spinning function (The end with the red light is the front) Hold the spin button on the remote control and push the right joystick to the left/right, the aircraft will spin in the corresponding direction.
Short press the spin button on the remote control once and quickly hold it
again and push the right joystick to the left/right, the aircraft will spin in
the corresponding direction while ascending.
Draw circle in the air (The end with the red light is the front) Hold the
rotate button on the remote control, and push the right joystick to the
left/right, the aircraft will rotate around and draw a circle in the the air
in the corresponding direction. Short press the rotate button on the remote
once and quickly hold it again and push the right joystick to the left/right,
the aircraft will rotate around and draw a circle in the air while it’s
spinning.
Light controls
The start-up colourful lights default to a gradual change. Press the left joystick or right joystick to the left or right during standby mode to change the color of the light. Or press the left joystick while the aircraft is flying to change the color of light. There are seven colors of light.
One key take-off/landing
- When the drone is in standby mode, press the one key takeoff/landing button, the drone will automatically take off and hover at a height of 1.5 meters.
- When the drone is in flight, press the one key takeoff/landing button and the drone will automatically land on the ground.
Altitude hold
- When releasing the left joystick (throttle) after controlling the drone to ascend/descend, the drone will continue to hover at the current height.
Product Feature
Undervoltage protection
- When the two indicators on the rear of the drone start to flash, it means that the power of the drone is low. At this time, please fly the drone back.
Overcurrent protection
- If the spinning propellers collide or get stuck, the aircraft circuit will activate overcurrent protection.
Troubleshooting
Contact Us
Please do not hesitate to contact us if you need any further support.
warranty@symatoys.com.cn
+ 1 718-312-0558(US)
+ 44 (0)7723708421(UK)
+ 4933545519201(DE)
For online support, please scan this code with Facebook Messenger
Product Accessories
Exploded View
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Notice
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- the dealer or an experienced radio/TV technician for help.
“This device complies with FCC radiation exposure limits set forth for the
general population (uncontrolled exposure). This device must not be collocated
or operating in conjunction with any other antenna or transmitter.”
RF frequency band: 2408-2472MHz
Transmitter power: 10dBm
Product name: [Drone] Decoration of Conformity Inserts: Hereby, GuangDong SYMA
Model Aircraft Industrial Co., Ltd. declares that the radio equipment type
helicopter is in compliance with Directive 2014/53/EU. The full text of the EU
Declaration of conformity is available at the following internet address:
http://www.symatoys.com/down/declaration-of-conformity.html
WARRANTY
LIMITED 2-YEAR WARRANTY AND FREE LIMITED REPLACEMENT PARTS FOR 2-YEARS
Symatoys.com.cn warrants to the original buyer only that its products will be
free from defects in material and workmanship for 2 years from the date upon
which the product isshipped, either directly from symatoys.com.cn or from an
Authorized Re-sellers location, to the buyer.
The following conditions must to be eligible for warranty coverage
- During the warranty period product is used as intended by the manufacturer.
- The Product has not been disassembled or modified.
- The labels and serial numbers show no signs of tampering or altering.
- Buyer has a warranty code obtained by registering their product online prior to making a claim.
EXCEPTIONS: THE LIMITED WARRANTY SHALL NOT APPLY TO:
- Damage caused by normal wear and tear
- Accident, negligence, abuse, misuse, misapplication or willful damage by buyer (or its agents), or acts of nature
- Crash or burning caused by non-manufacturing factors
- Damage caused by authorized modification or disassembly not authorized by the instruction manual
- Damage. caused by incorrect use or operation
- Damage caused by mismatch or misuse of battery or charger
- Failure of the operator to follow the operating instructions or use outside the product operating parameters
- Damage caused by operating the product in or around electromagnetic interference (i.e., radio transmitting tower, high-voltage wire, substation, etc.)
- Damage caused by operating the product where there may be interference caused by other wireless devices
- Operating the product with load capacity in excess of the sale weight listed in the manual
- Operating the product with aged, damaged or unauthenticated third-party components
- Operating the product with a defective battery
WARRANTY
PROCEDURE: Any claims for breach of the foregoing limited warranty shall only
be valid if the buyer makes such claim in writing within 2 years of the date
of shipment of the product to which the claim. To make a warranty claim,
please email at: warranty@symatoys.com.cn with your full name. address. phone
number, order number. vehicle type. part type purchase date and product issue.
LIMITED REMEDY:
Symatoys.com.cn’s sole liability and buyer’s sole remedy for any breach of the
foregoing warranty shall be at Symatoys.com.cn’s option to exchange the
product with a new product or a refurbished product that is functionally
equivalent to the original product or issue a credit or refund to the purchase
price the product. Any replaced products shall be warranted as set forth
herein, provided that the period within which the buyer may make further
claims shall be limited to the remainder of the original period. for the
applicable product or 2 years, whichever is longer (although the warranty
period shall be suspended during any period of replacement)
DISCLAIMER:
THE WARRANTY AND REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES.
AND Symatyos.com.cn DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT AND ANY WARRANTIES ARISING
OUT OF COURSE OF DEALING, COURSE OF PERFORMANCE AND TRADE USAGE.
Symatoys.com.cn IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR
UNDER ANY OTHER LEGAL THEORY. INCLUDING BUT NOT UMITED TO COSS OF USE; LOSS OF
REVENUE; LOSS OF ACTUAL ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON
CONTRACTS); LOSS OF THE USE OF MONEY, LOSS OF ANTICIPATED SAVINGS; LOSS OF
BUSINESS COSS OF OPPORTUNITY; LOSS OF GOODWILL, LOSS OF EPUTATION; LOSS OF
DAMAGE TO COMPRO-MISE OR CORRUPTION OF DATA; OR ANY INDIRECT OR CONSEQUENTIAL
LOSS OR DAMAGE HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF EQUIPMENT AND
PROPERTY. ANY COSTS OF RECOVERING OR REPRODUCING ANY DATA STORED IN OR USED
WITH THE PRODUCT OR ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF INFORMATION
STORED THE PRODUCT. Some states do not allow the exclusion or limitation of
incidental or consequential damages. so the above limitation or exclusion may
not apply to you. In addition, some states do not allow limitations on how
long an implied warranty lasts. so the above limitation may not apply to you.
FREE REPLACEMENT PARTS FOR 2 YEARS : Symatoys.com.cn shall also make
available any spare part needed for registered vehicles free of charge for 2
years from the date of purchase, with the exception of batteries, motors, and
transmitters. Shipping charges may apply Limit one part type request per
registered vehicle (e.g., registrants are entitled to one extra set of
batteries per registered vehicle}. To request spare parts. please email:
warranty@symatoys.com.cn with your warranty
code, vehicle name/model, current shipping address, purchase date, and part
type.
GET YOUR WARRANTY CODE AT symatoys.com.cn/pages/warranty-
signup
HAVE YOUR ORDER NUMBER AND PRODUCT MODEL READY
European Representative:
CET PRODUCT SERVICE LTD.
Osterholzallee 144
71636 Ludwigsburg Germany
Phone:+4971416432236
E-mail :info.cetservice@gmail.com
British Representative:
CET PRODUCT SERVICE LTD.
Beacon House Stokenchurch Business Park,
Ibstone Rd, Stokenchurch
High Wycombe HP14 3FE UK
Tel: +447419325266
E-mail:info.cetservice@gmail.com
United States Representative:
Duvin Trade Inc
5800 Wood Sorrel Dr, Littleton, Co, 80123, United States
Phone: 718-312-0558
E-mail: usa@symatoys.com
Manufacturer: GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD
Address: NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou,
China Postal Code: 515800
+1 718-312-0558 +44(0)7723708421(UK)
+49 335-4551-9201(DE) usa@symatoys.com(US)
eu@symatoys.com(EU) https://www.symatoys.com.cn
The company has the right of final interpretation of this user manual. Made in china
REMOTE CONTROL DRONE
Documents / Resources
| SYMA
X660 Remote Control
Drone
[pdf] User Manual
X660, X660 Remote Control Drone, Remote Control Drone, Control Drone, Drone
---|---
| SYMA
X660 Remote Control
Drone
[pdf] User Manual
X660, X660 Remote Control Drone, Remote Control Drone, Control Drone, Drone
References
- Syma Toys Online Coolest Gadgets for Trendy People – Symatoys
- warranty-signup – Symatoys
- SYMA Official Site
- Declaration Of Conformity - SYMA Official Site
- Syma Toys Online Coolest Gadgets for Trendy People – Symatoys
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>