vetus V-CAN Air 5kW 24V Inboard Electric Propulsion Motor User Guide
- May 15, 2024
- vetus
Table of Contents
vetus V-CAN Air 5kW 24V Inboard Electric Propulsion Motor
Product Information
Specifications:
- Model: MPE1MBV V-CAN
- Power Supply: 12V (10V, 16V)
- Maximum CAN-line Length: 40 meters
- Manufacturer: VETUS
Product Usage Instructions
Safety Information:
It is crucial to follow the safety guidelines provided to ensure safe operation of the product:
- Never work on the electrical system while it is energized.
- Always connect the CAN bus power supply to 12V (within the range of 10V to 16V).
- Use the E-DRIVE MPE1KBV key switch as the power supply.
- The maximum allowable CAN-line length is 40 meters.
- Do not connect more than one power supply to the VETUS CAN line.
**Installation Instructions
**
- Ensure the system is powered off before starting any installation procedures.
- Connect the CAN bus power supply to the designated 12V power source using the E-DRIVE MPE1KBV key switch.
- If extending the cable length beyond 40 meters, use the VETUS CANrepeater (CANR) to maintain proper functionality.
User Manual Reference:
For detailed installation and usage instructions, refer to the official
installation and/or user manual available on
www.vetus.com.
FAQ
-
Q: Can I use a different power supply other than the E-DRIVE MPE1KBV key switch?
A: It is recommended to use the specified E-DRIVE MPE1KBV key switch as the power supply to ensure compatibility and safe operation of the product. -
Q: What should I do if I need to extend the CAN line beyond 40 meters?
A: To extend the cable length beyond 40 meters, use the VETUS CANrepeater (CANR) to maintain proper functionality and avoid signal loss. -
Q: Is it safe to connect multiple power supplies to the VETUS CAN line?
A: No, it is not safe to connect more than one power supply to the VETUS CAN line as it can lead to malfunctions and potential damage to the product.
Warning
- Never work on the electrical system while it is energized.
- The CAN bus power supply must always be connected to 12 Volt (≥10 V, ≤16 V). Use the E-DRIVE MPE1KBV key switch as the power supply.
- The maximum CAN-line length is 40 meters. Use the VETUS CANrepeater (CANR) to extend the cable length.
- Never connect more than one power supply to the VETUS CAN line.
- Consult the installation and/or user manual on www.vetus.com
Fokkerstraat 571 – 3125 BD Schiedam – Holland
Tel.: +31 (0)88 4884700 – sales@vetus.com –
www.vetus.com
Printed in the Netherlands
370602.22 2024-01