Snatcher PVR007 Wireless Hotspot Camera User Guide

Snatcher PVR007 Wireless Hotspot Camera

Please read the guide carefully before using

Download APP

Please scan the QR code below with your mobile phone to download the latest version of P6SLite APP directly.

（Android/IOS scan code)

You can also search for the keyword P6SLite in App Store, Android Market, Google Play, and Apple Store to download.

Create account

Add equipment

1. Click Add Device, select “Add  WIFI Device” to reset the device.
   
   

2. Device scan APP QR code to add.
   
   S=WFJTLUNZTA== &P=eHJzMTIzNDU2&T=+480&K=yoanq&A=6600A8C0+05A6
   

3. Connect device hot spot add.
   
   

Hot watch

Select the device hotspot ZWP_IOTXXX_XXXXXX_XXX, enter the Password “01234567” to connect the pone to the device  hotspot, and open the APP to watch directly.

Equipment function

common problem

1.Question: When adding a device, it shows that the password is wrong or forgotten password which set after the last connection?
Answer: The device may have a password or have been changed or reset. “Reset button” (using Ushaped reset pin) long press for 5 seconds, the device voice prompt appears “Reset is successful”, it means that the device password has been reset successfully. Follow the steps above to add it again, that’s it.
2.Question: Is the device offline in the device list?
Answer: Please check whether the device is connected to the Intern et normally, please check whether the power supply of the device is normal, power off the device and restart it, and try to see if it ret urn s to normal.
3.Question: What should I do if the mobile APP cannot receive the push?
Answer: Please check whether push is turned on (it shows that it ha s been subscribed is turned on) and whether there is alarm push linkage (Settings-Alarm Settings).
4.Question: The playback video does not search for the video file?
Answer: Please check whether the SD card is damaged, whether the re is an SD card installed, check the device time, and check whether the playback video time is correct.
5.Question: The device cannot connect to WIFI?
Answer: Is it because the distance between the device and the device is too far, the hotspot connected to the mobile phone and the current device is incorrect, the router does not turn on the DHCP function, and the connected WIFI is SG (device
Does not support SG, only supports 2.4G}, the router has turned on t he anti- rubbing function to filter the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>