VEVOR ATWCA3223 Car Side Awning User Manual
- May 15, 2024
- VEVOR
Table of Contents
VEVOR ATWCA3223 Car Side Awning
Product Information
Specifications
| Model | Product Size | Colour |
|---|---|---|
| ATWCA3223 | N/A | N/A |
Product Usage Instructions
Warnings
- Do not attempt to set up the Awning in serious windy conditions.
- All guy ropes must be properly attached to the Awning and pegged to the ground at all times.
- Keep all flame and heat sources away from the Awning materials. Under no circumstance should any naked flame sources, fuel-burning devices or heating devices be used under or near.
- Keep a fire extinguisher or water bucket nearby.
Notices
- Clean with cold water and a soft brush – do not use soap or detergent.
- Do not be exposed to petrol, oil or solvents.
- Avoid creases and seams when rolling up the Awning.
Components
- Bag
- Tent
- Tent pole
- Tent stake
- Windproof rope
Assembly Instructions
- Lay the tent on the ground and spread it out.
- Connect tent poles.
- Follow the shape shown in the picture, insert each pole end into the eye holes of the tent.
- Insert the bottom ends of the three poles into the tube sleeve respectively.
- The tent covers the rear of the car, the two webbings are threaded into the two sides of the wheel hub and then buckled, and the two-door poles and the four wind ropes can be tied.
FAQ
-
Q: Where can I find technical support or obtain an E-Warranty Certificate?
A: For technical support and an E-Warranty Certificate, please visit www.vevor.com/support. -
Q: How should I clean the Awning?
A: Clean with cold water and a soft brush, avoiding soap or detergent. -
Q: Can I use heating devices near the Awning?
A: Under no circumstance should any naked flame sources, fuel-burning devices, or heating devices be used under or near the Awning materials.
Technical Support and E-Warranty Certificate
www.vevor.com/support
CAR SIDE AWNING USER MANUAL
We continue to be committed to providing you with tools at a competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands
Model : ATWCA3223
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
SPECIFICATIONS
| Model | ATWCA3223 |
|---|---|
| Product Size | 10×7ft |
| Color | Green |
WARNING
- Do not attempt to set up the Awning in serious windy conditions.
- All guy ropes must be properly attached to the Awning and pegged to the ground at all times.
- Keep all flame and heat sources away from the Awning materials. Under no circumstance should any naked flame sources, fuel-burning devices or heating devices be used under or near.
- Keep a fire extinguisher or water bucket nearby
NOTICE
- Clean with cold water and a soft brush-do not use soap or detergent.
- Do not be exposed to petrol, oil or solvents.
- Avoid creases and seams when rolling up the Awning.
COMPONENTS
Assembly Instructions
- Lay the tent on the ground and spread it out.
- Connect tent poles.
- Follow the shape shown in the picture, insert each pole end into the eye holes of the tent.
- Insert the bottom ends of the three poles into the tube sleeve respectively.
- The tent covers the rear of the car, the two webbings are threaded into the two sides of the wheel hub and then buckled, and the two-door poles and the four wind ropes can be tied.
Address : Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd.Suite 250, 9166 Anaheim Place, Rancho
Cucamonga, CA 91730
Made In China
EC REP
SHUNSHUN GmbH Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten,Germany
UK REP
Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United
Kingdom
Technical Support and E-Warranty Certificate
www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>