E-flite EFL13550 Micro DRACO 800mm Instruction Manual

: May 15, 2024
: E-flite

Table of Contents

E-flite EFL13550 Micro DRACO 800mm
Specifications:
Product Usage Instructions:
- Model Assembly:
Warranty and Service Information
Frequently Asked Questions (FAQ)
Documents / Resources

E-flite EFL13550 Micro DRACO 800mm

E-flite-EFL13550-Micro-DRACO-800mm

Specifications:

Wingspan: 789 mm
Length: 495 mm
Weight:
- Sans battery: 206 g
- With recommended 4S 300 mAh battery: 239 g

Included Items

Receiver/ESC: Spektrum™ AS3X/SAFE Receiver/ESC (SPM-1017)
Motor: 1412–1500Kv Brushless Outrunner (SPMX-1020)
Servos:
- Ailerons: (2) Servo A200 Offset (SPMSA200)
- Elevator: (1) Servo A201 (SPMSA201)
- Rudder: (1) Servo A201 (SPMSA201)
- Flap: (1) Servo A202 (SPMSA202)

Recommended Items

Transmitter: DX6e DXS 2.4 GHz (SPMR6655)
Onboard Battery: Spektrum 4S 300 mAh, 30C (SPMX3003SJ30)
Charger: S155 Charger (SPMXC2050)
Charging Adapter/Cable from IC3 to JST-RCY (SPMXCA310)
Optional Battery: LiPo 11.1V 300mAh 30C: RCY (SPMX3003SJ30)

Product Information:
The Micro DRACO 800mm BNF Basic comes equipped with:

Receiver/ESC: SpektrumTM AS3X/SAFE Receiver/ESC (SPM-1017)
Motor
Servos:
- Ailerons: (2) Servo A200 Offset(SPMSA200)
- Elevator: (1) Servo A201 (SPMSA201)
- Rudder: (1) Servo A201 (SPMSA201)
- Flap: (1) Servo A202 (SPMSA202)

Product Usage Instructions:

Assembly of the Model
Assembly instructions for the wing, including inserting mounting tabs into the fuselage, connecting the multi-connector to the wing, and securing the wing with a cross screwdriver not exceeding specified torque.

Transmitter Configuration
Instructions on setting up the transmitter, including activating gas cutoff function, setting telemetry, and programming transmitter settings for various flight controls like ailerons, elevator, rudder, and throttle cut.

Model Assembly:

Wing Assembly:

Insert the front wing mounting tabs into the upper fuselage holes.
Connect the multi-connector to the connector socket on the wing.
Gently press on the back of the wing to ensure it is fully inserted.
Secure the wing in place using a crosshead screwdriver no. 1 M2 x 18 mm (A). Do not overtighten the screw.

Low Voltage Cutoff (LVC):

Warning: Continuing to fly after the LVC warning may damage the batteries.

Transmitter Setup:
If your transmitter allows, activate the throttle cut function. Always activate throttle cut before approaching the aircraft.

Telemetry Settings:

Rx Voltage Minimum: 4.2V
Smart ESC Low Voltage Alarm: 3.4V
Smart Battery Startup Voltage Minimum: 4.0V
Motor Pole Count: 12

NX Series Transmitter Setup:

Go to Model Select and choose Add New Model at the bottom of the list. Select Airplane Model Type and Create.
Set Model Name, Aircraft Type (Wing: 1 Ail 1 Flap Tail: Normal).
In Main Screen, enter Function List.
In D/R and Expo menus, set Aileron Dual Rates and Expo as follows:
- Switch: F
- High Rates: 100%, Expo 10%
- Low Rates: 70%, Expo 5%

Warranty and Service Information

Detailed warranty information, including period of warranty, limitations, and contact information for service or assistance within the European Union.

Declaration of Conformity for the European Union
Information about the declaration of conformity with EU directives, frequency range for wireless communication, and manufacturer and importer details for the European Union.

Manufacturer: Horizon Hobby, LLC, 2904 Research Road, Champaign, IL 61822 USA

EU Importer: Horizon Hobby, GmbH, Hanskampring 9, 22885 Barsbüttel, Germany

Contact Information for EU: Horizon Technischer Service (service@horizonhobby.de, +49 (0) 4121 2655 100)

EU Compliance Notice: This product is marked in accordance with the European Union Directive 2012/19/EU concerning waste electrical and electronic equipment (WEEE). The symbol indicates that this product is not to be disposed of with household waste. It should be handed over to an appropriate collection center for recycling.

For the full compliance documents, visit Horizon Hobby’s Compliance Support.

Frequently Asked Questions (FAQ)

Q: Where can I get the most up-to-date manual information?
A: Visit Horizon Hobby’s website or Tower Hobbies and click on the Support section for the product.

Q: What are the recommended transmitter settings?
A: Refer to the manual for detailed transmitter settings including rates, expo, and throttle cut positions.

Q: Where can I find more information on compatible transmitters and telemetry?
A: Visit Spektrum’s website for more information on transmitter compatibility, firmware updates, and telemetry technology.

Q: How do I know if my transmitter supports throttle cut?
A: Check your transmitter manual or settings for throttle cut functionality. It is recommended to always use throttle cut when handling the aircraft.