AddBike 478599 Carry Dog Module Instruction Manual

AddBike 478599 Carry Dog Module

Specifications

• Product Name: Carry’Dog Module
• Compatibility: AddBike and AddBike+
• Maximum Capacity: 35 kg (77 lbs)
• Dimensions: 48cm x 55cm x 70cm | 18″ x 21″ x 27″
• Carry’Dog Volume: 68cm x 78cm x 92cm | 26″ x 30″ x 36″
• Maximum Size of the Dog: 50cm (19″) from paws to shoulder

Product Usage Instructions

General Warning
Before installing the Carry’Dog module, carefully read and understand the AddBike+ Instruction Manual. Follow all instructions in this guide to ensure safe usage of the Carry’Dog module. Contact your AddBike+ dealer or AddBike+ directly if you have any questions.

Carry’Dog Glossary
The Carry’Dog glossary provides an overview of key terms used in the manual.

Contents of the Carry’Dog Module
The Carry’Dog module includes the textile part of the module, such as the shell, cover, and front textile.

Installing the Carry’Dog
Follow the step-by-step instructions provided in the manual to correctly install the Carry’Dog module on your AddBike+.

Using the Carry’Dog
Ensure that you only use the Carry’Dog module on the AddBike+ produced by the company. Avoid installing or using the module on other cargo bikes or classic bikes. Store the Carry’Dog module in a dry place away from corrosive products when not in use.

Uninstalling the Carry’Dog Module
To uninstall the Carry’Dog module, refer to the manual for detailed instructions on removing it from your AddBike+.

Cleaning
Properly clean the Carry’Dog module as per the guidelines provided in the manual to maintain its condition.

Warranty
Refer to the warranty section in the manual for information on product warranty and related terms.

Assistance in Case of Problems
If you encounter any issues with the Carry’Dog module, contact customer support for assistance.

FAQ

1. Q: Can I use the Carry’Dog module on other cargo bikes?
   A: No, the Carry’Dog module is designed to be used only on the AddBike+ produced by the company.

2. Q: How should I store the Carry’Dog module when not in use?
   A: Store the Carry’Dog module in a dry place away from corrosive products to prevent damage.

The AddBike+ is a new concept that replaces your bike’s front wheel in order to turn into a handy three-wheeled bike, perfect for moving around in big cities. It consists of a two-wheeled base that allows you to transport light loads and attach different modules specifically designed for the AddBike+. These modules adapt your AddBike+ to transport heavier or bulkier loads, your shopping or even your children!

We welcome you to the Addbiker Family!
This document concerns only the Carry’Dog module and is complementary to the “AddBike User’s and Installation Guide”. This module is compatible with the AddBike and the AddBike+.

Maximum capacity

Carry’Dog| 35 kg |77Ibs
Dimensions (lxLxH in cm)
Carry’Dog volume| 48cm x 55cm x 70 cm |18” x 21” x 27”
AddBike + Carry’Dog| 68cm x 78cm x 92 cm |26” x 30” x 36”
Maximum size of the dog
Maximum size of the dog from paws to shoulder| 50 cm |19”

General Warning

Symbols and warnings:

WARNING!
This symbol indicates a hazard that could result in serious injury if the instructions are not followed.

CAUTION!
This symbol indicates a hazard that may result in minor injury if the instructions are not followed.
TIP!
This symbol indicates advice for the use or maintenance of your AddBike+
Before installing this module on your AddBike+, make sure you have read and understood the “AddBike+ Instruction Manual”. Read and follow the instructions in this guide: Read the entire guide carefully and follow the instructions in order to use the Carry’Dog module safely. If you do not understand certain indications, please contact your AddBike+ dealer or contact AddBike+ directly at: support@addbike.fr. Please keep this manual for future reference. It is also important to take into account the directions for use of the AddBike+ and that of the bike on which you are installing the AddBike+. The AddBike Company disclaims all liability in case of non- compliance with the instructions in this Instruction Manual and in case of modification of the product by the user.

Using the Carry’Dog Module
The Carry’Dog module is designed to be used on the AddBike+ produced by our company. Do not try to install or use this module on other cargo bikes or on a classic bike. The Carry’Dog module is not designed to be stored outdoors for an extended period of time. It must be stored in a dry place away from corrosive products.

Carry’Dog glossary

Contents of the Carry’Dog module

The Carry’Dog module is delivered in a parcel containing:

• The textile part of the module (shell, cover, front textile);
• The carpet/mat for the floor of the module;
• 2 upper tubes;
• 2 front tubes;
• 1 crossbar;
• 1 compact slat;
• 2 screws BHC M5x30;
• 4 screws BHC M5x20;
• The user guide for the Carry’Dog module.

Before assembling the Carry’Dog module on your bike, remember to check that the product is in good general condition (no scratches, no bent parts).

Installing the Carry’Dog

The Carry’Dog module must be installed and uninstalled as explained. Improper installation can lead to accidents that could cause serious injury. We advise you to add the Carry’Dog module to your AddBike+ only when the latter is properly installed on your bike.

For the installation/deinstallation you will need an Allen key size 3:

Illustration 2 – Tool needed
Screw the provided compact slat at the bottom of the front tubes with 4 screws BHC M5x20. Refer to the image below.

Unscrew the 2 screws as shown below, situated on the AddBike+ seat. Follow with the screws on each side of the AddBike backrest;

Insert the front tubes of the compact slat into the seat of the AddBike+. Make sure that the screw holes are in line.

Screw in the previously removed screws located in the seat of the AddBike+, by inserting them through the holes in the front tubes;

• Install the textile shell:
  • Slide on the black textile straps
  • Position the back of the textile shell facing the backrest of the AddBike+

At the back of the module, hook the 3 textile straps around the backrest of the AddBike+, starting with the bottom one;
Tighten the fabric on both sides, centering the fabric on the backrest as much as possible.

Slide the two upper tubes through the elastic straps of the textile following the direction of the arrow shown in Illustration 9;

Remember to insert the end of the upper tubes into the last upper elastic strap before continuing.

Insert the top tubes into the holes in the backrest and front tubes at the same time. If they do not match, you have positioned the top tube in the wrong direction;

Screw the previously removed backrest screws by inserting them through the holes in the upper tubes;

First hook the upper strap on the back of the module, then hook the leash retaining strap (vertical) as shown in Illustration 13;

Follow by tightening the last strap on the backrest of the AddBike+;
Tighten the fabric on both sides, centering the fabric on the backrest as much as possible. No cables from the AddBike+ should be caught in the strap clamps.

Slide the crossbar into the hem of the front textile cover;

Position the crossbar between the upper and front tubes at the front of the module and fix it to the rest of the structure using the BHC M5x30 screws supplied;

Assemble the front textile with the shell of the Carry’Dog using the Velcro fasteners provided

Assemble the floor mat at the bottom of the Carry’Dog by attaching the four press studs provided;

Assemble the cover by attaching it to the module using the press studs and Velcro fasteners shown in illustration 19;

• If you wish to use the Carry’Dog without its cover, do not attach it to the textile. You can then roll the cover up and place it at the bottom of the Carry’Dog, keeping it in place with the elastic straps (see Illustration 21).
• You will find in Illustration 21, all of the different storage elements in which to place the accessories of your Carry’Dog such as the bowl and the rolled-up cover.

Using the Carry’Dog

Before travelling with your pup, we strongly recommend that you dedicate some time getting your furry friend accustomed to the Carry’Dog.

These five steps might help you with that:

1. Park your AddBike+ using the parking brake, the tilting-wheels locked and/or the kickstand of your bike.
2. To ease the process, place a mat or a blanket used by your dog. Bringing along toys or other familiar objects can also help.
3. Open the front textile by undoing the Velcro then help your dog get settled in the Carry’Dog without forcing it. Avoid sudden movements. At the beginning the pup might not be able to climb in on their own so assistance should be provided.
4. Once inside, encourage the pup to get in a seated position by giving verbal instructions or with treats.
5. After a while, help him to get out of the Carry’Dog. It mustn’t jump over the crossbar

You should repeat this exercise until your furry friend feels comfortable with the Carry’Dog. Once he has adjusted to it, start with a few rides by pushing the bike by hand. When the dog is comfortable with the movement, you can start riding together! Bon voyage!

Rules related to the use of the Carry’Dog

• The maximum weight of the dog allowed in the Carry’Dog is 35 kg |77lbs
• When transporting a dog in the Carry’Dog, make sure that the dog is securely attached to the leash/harness attachment provided.
• Do not transport children in the Carry’Dog.

Driving the AddBike while loaded.
Refer to chapter 9C of the “AddBike+ Instruction Manual”.

Uninstalling the Carry’Dog module

• Remove the cover attached to the textile of the Carry’Dog
• Remove the floor mat inside the Carry’Dog;
• Remove the crossbar by unfastening the screws holding it in place and then remove the textile attached to the module;
• Loosen the straps at the back of the Carry’Dog;
• Undo the screws holding the upper tubes to the backrest and remove them from the frame;
• Remove the textile by sliding it along the elastic straps.
• Undo the screws holding the front tubes to the seat and remove the front tubes;
• Fix the screws back in their position accordingly, on the seat and backrest of the AddBike..

Cleaning
Your Carry’Dog can be cleaned with a sponge or with water. We advise you to remove the textile parts, especially the floor mat for easier cleaning.

Warranty

The warranty of the Carry’Dog module is valid for 2 years after purchase. The product must be kept and used in accordance with its instructions. Any damage resulting from improper use, insufficient maintenance or normal wear and tear is excluded from the guarantee.

The quality of the product through time depends strongly on :

• The distance taken/ load transported
• The driving style: the amount of abrupt starts and braking, winding roads at high speed (…)
• Meteorological and environmental factors: ultraviolet rays, humidity, dirt, temperature, air salinity, contact with saltwater
• The state of maintenance: regular maintenance checks, maintenance products used

Assistance in case of problems
If a problem occurs with your Carry’Dog, please contact us via e-mail at support@addbike.fr or you can contact your dealer. Both parties will offer you assistance to solve your issue. You can consult the list of AddBike retailers, trained for the construction and maintenance on www.add-bike.com.

References

• AddBike - Innovative cargo bike solutions made just for you!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>