ESKAZ Minder Motorcycle Indicator Installation Guide

ESKAZ Minder Motorcycle Indicator

Product Information

Specifications :

• Model: ESKAZ Minder
• Rating: IP67
• Compatibility: Motorcycle use

Product Usage Instructions

Installation Instructions:

1. Fit the ESKAZ Minder in a suitable place on your motorcycle and secure it with either the buddy pads or the handlebar mounting plate provided.
2. The buzzer is IP67 rated, ensure the unit faces toward the rider and is tilted slightly downwards to prevent rain collection.
3. Locate the positive wires of either the front or rear indicators (front is recommended).
4. Connect the brown wire from the ESKAZ unit to one of the positive indicator wires using a T-Tap connector.
5. Connect the white wire to the positive wire of the other front indicator using a T-Tap connector.
6. Connect the green wire from the ESKAZ unit to a suitable earth point on your motorcycle using a ring terminal or to one.

Frequently Asked Questions (FAQ):

• Q: Is the ESKAZ Minder waterproof?
  A: Yes, the ESKAZ Minder is IP67 rated, ensuring it is protected against water immersion up to 1 meter for 30 minutes.

• Q: Can I install the ESKAZ Minder on any motorcycle
  A: The ESKAZ Minder is designed for motorcycle use, but ensure compatibility with your specific bike model before installation.

Installation instructions

ESKAZ MINDER

• Never forget to cancel your indicators again! Motorcycle indicator warning alarm with 20 second delay.
• Audible reminder if indicator left on.
• Allows sufficient time for ride to self cancel.
• Fits all makes and models.
• Easy install – no battery connection required.

Contents

• 1 x ESKAZ Minder

• 1 x Cable ties

• 1 x Ground connector

• 3 x T-Tap connectors

• 1 x Base mount

• Adhesive pads

• Thank you for purchasing this product, it is easy to install, and once fitted will alert you if your turn indicators have not been cancelled. This happens only if the turn indicators have not been cancelled within 20 seconds.

• The ESKAZ Minder is small and weatherproof, and can be either handlebar mounted or sited in any convenient position forward of the rider.

• The ESKAZ Minder requires no power and is connected only to the turn indicators. None of the motorcycle wiring needs to be cut or removed.

  1. Fit the ESKAZ Minder in a suitable place on your motorcycle and secure with either the buddy pads or the handlebar mounting plate provided.
     The buzzer is IP67 rated but the unit should face toward the rider and be tilted just slightly downwards to prevent rain collecting

  2. Locate the positive wires of either the front or rear indicators ( front is normally best )

  3. Connect the brown wire from the ESKAZ unit to one of the positive indicator wires using a T-Tap connector. Connect the white wire to the positive wire of the other front indicator using a T-Tap connector.

  4. Connect the green wire from the ESKAZ unit to a suitable earth point on your motorcycle using a ring terminal OR to one of the negative turn indicator wires using a T-Tap connector.
     When pushing the 2 connectors together ensure that the metal blade correctly inserts into the receptacle.
     T- Tap usage guide at https://www.youtube.com/watch?v=coSCSTtgalQ

Alternative method

If your motorcycle has an indicator warning lamp the ESKAZ can be wired in using just 2 of the wires.

1. Connect the brown wire to the positive warning lamp wire.
2.  Connect the green wire to a suitable/ground point on the motorcycle.
   Turn on the motorcycle ignition and operate the turn indicator, after 20 seconds the warning buzzer should sound.

Now that you have the ESKAZ Minder unit installed it will always remind you to cancel the indicators.
Your Eskaz Minder carries a 2 year replacement warranty. Return the unit in its original packaging for a free replacement. admin@eskaz.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>