inovonics ENKIT-SDI2 SDI2 Wireless Interface and Receiver Kit User Guide
- June 4, 2024
- Inovonics
Table of Contents
Bosch Security Product Guide
Inovonics Wireless Solutions
Inovonics’ line of EchoStream® wireless intrusion detection devices and mobile
duress (panic) buttons are designed with today’s applications in mind.
Supporting installations with thousands of security devices across campus, the
EchoStreamfamily of pendant transmitters, universal transmitters, motion
detectors and add-on receivers can connect to
virtually any security system. Unique to Inovonics is the high-power repeater mesh that
intelligently amplifies transmissions from EchoStream transmitters. Providing
coverage in all types of building construction, thus eliminating the need for
the labor associated with wired installs. EchoStream provides the flexibility
cover small, medium and large commercial buildings as well as complete
campuses.
ANKIT-SDI2
- UL and CSFM listed
- Includes B820 direct connection interface board and EN4200 receiver
- The B820 mounts inside the EN4200 housing, no separate enclosure is required
- It May be installed up to 1000 feet from the panel for optimal reception
- Capacity to store up to eight repeater IDs
- For systems with more than 8 repeaters, use the ENKIT-01 on the ZONEX bus
- Compatible with control panels employing the Bosch SDI2 communications device bus including all versions of the D9412GV4, D7412GV4 and D7212GV4, as well as the B3512, B4512, B5512, B6512, B8512G and B9512G
ENKIT-01 (GV3 and Older Systems)
- Internal interface keypad with diagnostic functions
- Compatible with G series panels
– D9412GV3, D9412GV2 and D9412 v6.30 or higher
– D7412GV3, D7412GV2 and D7412 v6.30 or higher
– D7212GV3, D7212GV2 and D7212 v6.41 or higher
Panel Interface Options
BOSCH ® – EN4200
D7212G – 32 pts.| B4512 – 20 pts.| B5512 – 40 pts.
B3512 – 8 pts.| B8512G – 91 pts.|
B6512 – 88 pts.| B9512G – 350 pts.|
Security System Configuration| Add on or serial Receiver
---|---
Security Panel|
Repeater Network*
Wireless Transmitters
Water Resistant Pendant Transmitter
Compact single or double button pendants that can be supervised. LED
flashes when transmitting. Ideal for healthcare applications. Single Button
EN1223S Double Button EN1223D Wristband ACC623
Necklace Pendant Transmitters
Sleek single or double button pendant that can be supervised. LED flashes when
transmitting. Easy to wear with included necklace.
Single Button EN1233S Double Button
EN1233D
Belt Clip Pendant Transmitters
Sleek single or double button pendant that can be supervised. LED flashes when
transmitting. Durable belt clip included..
Single Button EN1235S Double Button
EN1235D
Fixed Position Hold Up Pendant Transmitters
Fixed position transmitters include mounting hardware for easy installation
and a back tamper for removal of alarms
Single Button EN1235SF
Double Button EN1235DF
Four Condition Pendant Transmitters
Multiple condition pendants require the use of a multi-condition receiver and
application designed to support advanced functionality Four Condition EN1224
Four Condition On/Off EN1224-ON
Multi Condition Pendant Transmitters
Multiple condition pendants require the use of a multi-condition receiver and
application designed to support advanced functionality.
Three Condition EN1236D Two Condition EN1238D
Universal Transmitters
Universal transmitters can be used with any standard N/O or N/C sensor and
include a case tamper switch.
Universal Transmitter EN1210 With EOL Resistor EN1210EOL
Door/Window Transmitter with Reed Switch EN1210W
Universal Transmitters with Wall Tamper
Wall tamper switch adds protection from device removal.
Universal Transmitter with Wall Tamper EN1215EOL With Reed Switch and Magnet
EN1215WEOL
Dual Input Universal Transmitter
Dual input universal transmitters can be used with any standard N/O or N/C
sensor and include an additional N/C input.
Dual Input Universal Transmitter EN1212 With Wall Tamper EN1216 Long Range
EN1252
Smoke Detector
The EN1244 features an onboard sounder, an LED indicator, tamper, EchoStream®
network supervision, and local test capability.
Wireless CO
Detector
The EN1245 features an onboard sounder, a CO sensor, LED indicators and local
test capability to allow the user total visibility of its functionality.
Billtrap
Transmitter
The EN1249 provides the flexibility for use in cash drawers for use in any
financial or retail environment. Features case and back tamper, Smart Baiting
with LED confirmation,
and two or ten-second delay transmission modes. Glassbreak Detector
The EN1247 uses acoustic pattern recognition technology for proven
performance, extended range, and increased immunity to false alarms.20ft
radius allows for multiple window coverage. Glassbreak Detector
The EN1248 glass break detector is a wireless omin- directional glass break
detector, providing detection coverage of 180°.
This is a direct replacement of the EN1247. Wall Mount Motion Detector
The EN1260 features digital signal processing that recognizes human signatures
to reduce false alarms. Curtain Lens Kit ACC672CT Long Range Lens Kit (99ft)
ACC672LR Pet Alley Lens Kit ACC672PA 360° Ceiling Mount Motion Detector
The EN1265 four-element motion detector offers a 360° coverage pattern,
case tamper switch, and up to an 18ft mounting height with the included lens.
High Ceiling Lens (25ft) ACC669 360° Ceiling Mount Motion Detector
The EN1266 360° ceiling mount motion detector is a four-element passive
infrared intrusion detector for use in electronic security systems in ceiling
mount applications.
This is a direct replacement for the EN1265.
Motion Detector with Pet Immunity
The EN1262 is designed for low-traffic applications and features pet immunity
to reduce false alarms from animals. Includes a case tamper switch and
optional wall tamper.
Wall Mount Motion Detector with Pet Immunity
The EN1263 motion detector with pet immunity is an advanced, fully supervised
low-current wireless motion detector with the most advanced optics detection
method for
reliable system operation. This is a direct replacement for the EN1260/EN1262.
High Traffic Four Element Motion Detector
The is developed specifically for high-traffic environments delivering
approximately four years of battery life. Includes case and back tamper, and
features pet immunity up to 33lbs/1ft Long-range Lens (60ft) ACC668
Water Detector
The EN1751 water detector provides early warning against damage caused by
leaking appliances and standing water when used with the Honeywell® FP280 or
Flair Electronics® 1010-H2OS36-EN1751 Probes sold separately. Temperature Detector
The EN1752 temperature detector enables programmable temperature threshold
alarming for ambient temperatures and external monitoring when used with the
Honeywell®
T280R temperature probe. Probe sold separately. Serial Receivers – Direct to Panel Integration
Serial receivers integrate directly to partner panels used in commercial
access control/intrusion. These integrations leverage programming and wiring
familiarity to expedite
the inclusion, or expansion, of wireless endpoints. Panel integration list on
the front
High Power Repeater
The high-power repeater amplifies transmissions from any transmitter. High
Power Repeater with Transformer EN5040-T
Without Transformer EN5040
Weatherproof Enclosure ACC650
IP Gateway (requires an IP gateway license)
The EN4080 IP gateway combines EN4000 receiver and third-party IP gateway
functionality into a single product.
LICBACNET Enables output EchoStream messages into BACnet/IP systems LICMQTT
Enables output EchoStream messages into MQTT- based Amazon Web Services
applications
Add-On Receivers
Add-on receivers cost-effectively add EchoStream wireless transmitters to any
installation. Includes form C relays with dedicated alarm and fault output.
The EN4216MR and EN4232MR are UL listed, support multi-condition transmitters,
and include event logging.
Receiver | Transmitters | Outputs |
---|---|---|
EN4204R | 4 | 4 Alarm / 1 Fault |
EN4216MR | 16 | 5 Alarm / 1 Fault |
EN4232MR | 32 | 11 Alarm / 1 Fault |
* EN1224-ON
compatible with ENKIT-01 and ENKIT-SDI2 systems for on/off button functions
only.
The range and performance of any wireless product depend on the structure and
environment in which it operates.
Continual enhancements to our products may cause specifications to change
without notice. Visit our website for UL information.
Phone: 303.939.9336
• Toll-Free: 800.782.2709
• Tech Support: 800.782.2709, option 2
• Customer Service: 800.782.2709, option 1
• sales@inovonics.com
www.inovonics.com