HYUNDAI WS 8446 Meteo Weather Station with DCF Instruction Manual
- June 4, 2024
- HYUNDAI
Table of Contents
- HYUNDAI WS 8446 Meteo Weather Station with DCF
- DESCRIPTION OF CONTROL
- POWER METEO STATION
- SETTING THE EXTERNAL SENSOR
- TIME DISPLAY THROUGH RADIO CONTROL
- SETTING THE CLOCK MANUAL
- WEATHER FORECAST
- TECHNICAL DATA
- Charging adapter
- DISPOSAL
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HYUNDAI WS 8446 Meteo Weather Station with DCF
DESCRIPTION OF CONTROL
- Icons weather forecast
- Outdoor temperature/humidity external sensor
- Indoor temperature/humidity
- Time display
- Calendar
- Tendency temperature
- Channel external sensor
- Alarm Clock icons 1 and 2
- Symbol Radio Control RCC
- Snooze/light button
- ALARM button
- MEM button
- SET button
- UP button
- DOWN button
- Battery Compartment 3 x AAA (batteries not included)
- External power supply socket
- Pedestal
- TX button
- TX channel selector, select external sensor channel
- Compartment 2xAA batteries (batteries not included)
POWER METEO STATION
Open the battery compartment (16) on the back of the unit and insert three “AAA” cell batteries according to polarity. Insert the external power in the socket (17), insert the adapter into a wall outlet.
POWER SENSOR EXTERNAL
Open the battery compartment (21) on the rear, and insert two “AA” size
batteries matching the polarities.
SETTING THE EXTERNAL SENSOR
This weather station is arranged to communicate with three external sensors. One of these comes with the unit, the remaining two are optional.
- Power the weather station as described in POWER METEO STATION.
- Insert the batteries in the external sensor, and set the selector (20) to the desired transmission channel (1, 2 or 3). Automatic weather station data to be transmitted.
- Press the UP button (14) more times to select the channel set on the external sensor. Sequentially selects channel 1, channel 2, channel 3 or sequential display of 3 channels (icon flashing channel). In case of nonreceipt of the display signal, it is shown the character “-“.
Notes:
Place the weather station away from equipment that generates magnetic fields
such as mobile phones, televisions etc.
TIME DISPLAY THROUGH RADIO CONTROL
This device is equipped with a receiver able to receive the time signal of the Physikalisch Technische Bundesanstalt Braunschweig (central Germany) admissible in a 1500 km radius. Press and hold the DOWN button (15) of the weather station, the symbol (9) will flash radio control and within 24 hours will be displayed on the control radio time signal.
- Note 1: When the symbol of the blinking control radio is displayed you can not make any manual adjustments.
- Note 2: When the symbol is steady it means that the signal ‘was properly received.
- Note 3: The time is transmitted from central Germany, so if we are in a country with a different time than Germany is necessary to set the time zone.
- Note 4: Place the weather station away from equipment that generates magnetic fields such as mobile phones, televisions etc.
It not in all areas of Europe may be able to receive the signal of the radio control. In this case you must set the time manually.
SETTING THE CLOCK MANUAL
- Press and hold the SET button (13) to enter the manual clock setting.
- Set the time zone of your region through the UP (14) or DOWN (15). You can choose between -1, 0, +1 (UTC correction)
- Press the SET button (13), the display will start flashing in the time display 12/24 hours.
- Set the time display in 12/24 hours via the UP (14) or DOWN (15).
- Press the SET button (13), the display will begin to flash hours.
- Set the hours with UP (14) or DOWN (15).
- Press the SET button (13), the display will begin to flash the minutes.
- Set the minutes using the UP (14) or DOWN (15).
- Press the SET button (13), the display will start flashing year.
- Set the year using the UP (14) or DOWN (15).
- Press the SET button (13), the display will begin to flash the month.
- Set the month using the UP (14) or DOWN (15).
- Press the SET button (13), the display will start flashing on the day.
- Set the day using the UP (14) or DOWN (15).
- Press the SET button (13), the display will start flashing the date format.
- Set the date format via the UP (14) or DOWN (15).
- Press the SET button (13), the display will begin to flash duration in minutes of the Snooze function.
- Set the duration of the snooze function (5 min – 60 minutes) through the UP (14) or DOWN (15).
- Press the SET button (13) to finish the manual clock setting.
SETTING THE ALARM
-
Press the SET button (13) to display Alarm 1 (A1). Press it again to view Alarm 2 (A2). Press it again to return to display the current time.
-
While viewing A1 or A2 hold the SET button (13), on the display the alarm time starts to flash.
-
Press the UP (14) or DOWN (15) to adjust the hour.
-
Press the SET button (13), on the display the alarm minutes start flashing.
-
Press the UP (14) or DOWN (15) to adjust the minutes.
Press the SET button (13) to end the alarm setting. -
To activate alarm 1 or 2 press the ALARM button (11); press it once to activate the alarm 1 (appears the alarm 1) icon, then press it again to activate the alarm 2 (the alarm icon appears 2), press it a third time to activate both alarms (both icons appear ), press it again to deactivate both alarms.
-
Press the button SNOOZE (10) To temporarily disable the alarm,. The alarm will sound again after the set minutes nela time manually (default 5 minutes).
-
To turn off the alarm, press the ALARM button (11) until the corresponding icon disappeared.
WEATHER FORECAST
The digital barometer automatically detects the atmospheric pressure changes accordingly to display the symbol to forecast weather (1). This forecast concerns the 12/24 hours. For example: If the barometer detects high pressure, the display will show the symbol of the sun, but externally it could rain, because the provision relates to the 12/24 hours. N.B.: The weather forecast symbols may not reflect current weather conditions. They relate only to future conditions. Predictions can not be 100 % secure due to various factors. The manufacturer is not liable for any damages or situations caused by an incorrect forecast.
TEMPERATURE AND HUMIDITY INSIDE / OUTSIDE – MIN / MAX VALUES – BAROMETRIC
PRESSURE
The indication of the temperature is to the right of the display, while the
humidity value is indicated at the right temperature in the small box. In the
box INDOOR are indicates the temperature and humidity interior, and the box
OUTDOOR indicates the temperature and humidity detected by the external
sensor. Press the DOWN (15) button to select the temperature units in °C or
°F.
Minimum/maximum values of the day: press MEM (12), the display shows the
maximum value of temperature/humidity recorded during the day; press the MEM
button (12), it shows the minimum temperature/humidity. During the display of
minimum / maximum values, by holding down the MEM button (12) the recorded
data are deleted and you star t a new calculation of daily mean values.
Atmospheric pressure: Press and hold the MEM button (12), in the CALENDAR
box will be displays the current pressure value hPa. Press and hold the MEM
button (12) to return to display the date.
TREND OF OUTDOOR TEMPERATURE – OUTDOOR TEMPERATURE LESS THAN 0 °C
Along with the outdoor temperature it is shown the prediction of the temperature through the icons(6):
- temperature decreases, the icon is displayed when a change is registered lower temperature of -1 °C.
- stationary temperature, the icon is displayed when a change is registered in temperature between +/- 1 °C.
- temperature rising, the icon is displayed when you record a higher temperature change of + 1 °C.
When the external sensor detects a temperature below 0 °C on the weather forecast display lights up the sleet symbol to indicate the possible formation of ice; in the presence of more sensors, the symbol lights up only when it receives the sensor that detects the temperature value below 0 °C.
TECHNICAL DATA
- Weather Station: 0 °C to +50 °C
- Indoor humidity: from 20 % to 90 % RV (relative humidity)
- External sensor: from -40 °C to +70 °C
- Channels: max. 3 external sensors
- Receiving radio control signal: 77,5 KHz
- Wireless Outdoor Sensor: 433,92 MHz RF transmitting frequency; ERP 0,04 mW
- Feed unit: 0,1 °C for the temperature – 1% for moisture
- Main Unit Power: 3 x AAA batteries (not included) Power supply 230 V 50 Hz / 4.5 V 0,15 A supplied
- External sensor supply: 2x AA batteries (not supplied)
Charging adapter
A| Manufacturer’s name or trademark, business registration number and address| HUAXU ELECTRONICS
FACTORY, No. 1 Shi Tang Bei Street 2, Shi Jie Town, Dong Guan City, 523290, Guangdong, China
---|---|---
B| Model identifier| HX075-0450600-AG-001
C| Input voltage| 100-240 V
D| Input frequency| 50/60 Hz
E| Output voltage| 4,5 V
F| Output current| 0,6 A
G| Output power| 2,7 W
H| Average efficiency in active mode| 73,64%
I| Low load efficiency (10%)|
J| Power consumption without load| 0,073 W
DISPOSAL
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Hereby, ETA a.s. declares that the radio equipment type WS8446 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.hyundai- electronics.cz/declaration_of_conformity
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>