POLAR Grit X Pro SmartWatch User Guide
- June 4, 2024
- Polar
Table of Contents
POLAR Grit X Pro SmartWatch
How to get started
- To wake up and charge your watch, plug it into a powered USB port or a USB charger with the custom cable that came in the box.
- To set up your watch, choose your language and setup method. The watch gives you three options for setup: set up (A) on your phone, (B) on your computer or (C) on your watch. Browse to the option most convenient for you with UP/DOWN and confirm your selection with OK. We recommend option A or B.
To get the most accurate and personal training and activity data, it’s important that you’re precise with the settings in the setup.
SET UP ON YOUR PHONE
You have to do the pairing in the Polar Flow app and NOT in your phone’s
Bluetooth settings.
- Make sure your phone is connected to the internet and turn on Bluetooth®.
- Download the Polar Flow app froYou have to do the pairing in the Polar Flow app and NOT in your phone’s Bluetooth settings.m the App Store or Google Play.
- Open the Flow app on your phone. The Flow app recognizes your watch and prompts you to start pairing it. Tap the Start Button.
- Accept the Bluetooth pairing request on your phone. Confirm the pin code on your watch and the pairing is done.
- Sign in with your Polar account or create a new one. We’ll walk you through the sign-up and setup within the app.
When you’re done with the settings, tap Save and sync and your settings are synced to your watch.
SET UP ON YOUR COMPUTER
- Go to flow.polar.com/start and download and then install the Polar FlowSync data transfer software to your computer.
- Sign in with your Polar account or create a new one. We’ll walk you through the sign-up and setup within the Polar Flow web service.
If there is a firmware update available for your watch, we recommend you install it during the setup. It may take up to 10 minutes to complete. Your watch syncs your training data with the Flow mobile app automatically if your phone is within the Bluetooth range and the Flow app is running. You can also sync your training data manually with the Flow app by pressing and holding the BACK button of your watch.
Get to know your watch
KEY BUTTON FUNCTIONS
- Press OK to confirm selections.
- Browse the watch faces, training views and menu with UP/DOWN, move through selection lists, and adjust a chosen value.
- Return, pause and stop with BACK. In time view press BACK to enter the menu, press and hold to start pairing and syncing.
- Press and hold LIGHT to lock buttons.
*TOUCH DISPLAY (NOT AVAILABLE IN ALL MODELS)**
- Tap the display to choose items
- Swipe up or down to scroll
- Swipe left or right in time view to view different watch faces
Wrist-based heart rate
To get accurate heart rate readings during training, make sure that you wear the watch correctly:
- Wear the watch on top of your wrist, at least a finger’s width up from the wrist bone.
- Tighten the wristband firmly around your wrist. The sensor on the back must be in constant touch with your skin and the watch should not be able to move on your arm.
When not measuring heart rate, loosen the wristband a bit for a more comfortable fit and to let your skin breathe.
Your watch is also compatible with Polar heart rate sensors with chest straps. You can buy a heart rate sensor as an accessory. Find a full list of sensors and accessories your watch is compatible with at support.polar.com/en/compatibility
Start training
- Wear your watch and tighten the wristband.
- Press BACK to enter the main menu, choose Start training, and then browse to a sport profile.
- Go outdoors and away from tall buildings and trees. Keep your watch still with the display upwards to catch GPS satellite signals. The circle around the GPS icon will turn green when the GPS is ready.
- The watch has found your heart rate when your heart rate is shown.
- When all signals are found, press OK to start training recording.
PAUSE AND STOP TRAINING
Press BACK to pause your training session. To continue training, press OK. To
stop the session, press and hold BACK when paused until Recording ended is
displayed. You’ll get a summary of your training session on your watch right
after you’ve stopped training.
TAKE CARE OF YOUR WATCH
Keep your watch clean by rinsing it under running water after each training
session. Before charging, please make sure there’s no moisture, dust or dirt
on the charging contacts of your watch and cable. Gently wipe off any dirt or
moisture. Do not charge the watch when it’s wet.
Polar Flow
Sync your watch with the Flow app after training and get an instant overview
of and feedback on your training, activity and sleep.
Sync your training data to the Flow web service with your computer or via Flow
app to track your achievements, get guidance and see a detailed analysis of
your training results, activity and sleep.
Information about materials and technical specifications are available in the user manual at support.polar.com/en
The radio equipment operates 2.402 – 2.480 GHz ISM frequency band(s) and 5 mW maximum power.
The Polar Precision Prime optical heart rate sensor fusion technology uses a very small, safe amount of electric current on the skin to measure the contact of the device to your wrist to enhance accuracy.
- APP STORE IS A SERVICE MARK OF APPLE INC.
- ANDROID AND GOOGLE PLAY ARE TRADEMARKS OF GOOGLE INC.
- IOS IS A TRADEMARK OR REGISTERED TRADEMARK OF CISCO IN THE U.S. AND OTHER COUNTRIES AND IS USED UNDER LICENSE.
MANUFACTURED BY
POLAR ELECTRO OY PROFESSORINTIE 5
90440 KEMPELE
FINLAND
CUSTOMERCARE@POLAR.COMWWW.POLAR.COM
17982757.03 ENG 7/2021
Getting Started Guide
Learn more at support.polar.com/en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>