BAUHN AMAB-0621-D Dual Monitor Bracket Installation Guide
- June 6, 2024
- BAUHN
Table of Contents
Installation Guide
Model: AMAB-0621-D
Dual Monitor Bracket
Hey!
Let’s get your new monitor bracket ready to use, fast!
Have you got everything?
Unpack the box (be gentle) and make sure all of these items are there:
A. Pole
B. Monitor Arms
C. M4 x 8mm Screws (8)
D. M4 x 12mm Screws (8)
E. Screw Spacers (8)
F. 4mm Hex Key
G. 5mm Hex Key
H. Pole Cover| I. Bracket Clamp Cover
J. Cap Screw (3)
K. Bracket Clamp
L. Pole Cable Clip
M. Monitor Arm Cable Clips (4)
N. Warranty Certificate
O. General Safety Warnings
P. Installation Guide
---|---
| You will also need a Phillips-head screwdriver to secure
your monitors to the bracket
---|---
Attach to your desk (Mounting to edge of desk)
| Adhere the bracket clamp cover to the bracket clamp and
attach the clamp to the base with the cap screw. Use the 4mm hex key to
tighten.
---|---
| Tighten the bracket clamp from beneath by turning the
adjuster clockwise and make sure it’s tight. Slide the base cover on and clip
into place.
Be careful not to overtighten the clamp or you might cause surface damage to your desk or table
Attach the arm
| Slide the bracket arms onto the pole. Slide up or down to
adjust the height of where your monitors will sit.
Tighten into position at the back, using the supplied 5mm hex key.
---|---
| Nearly done! Just a bit more on the other side of this
page…
Mount your monitors
| Install the upper two screws but don’t screw them completely just
yet. Hang the monitor on the mounting plate.
---|---
| Install the lower two screws. Now you can fasten the upper two
screws all the way.
This bracket can handle monitors that weigh 8kg each or less!
Adjust to your space
| It’s important to make your workspace as ergonomic as
possible.
This bracket allows you to adjust the height, tilt and swivel of your
monitor’s position, so that it’s truly fitted to your space and sitting.
To lock in your adjusted position, you will need to tighten the bolts on the
mounting plate and arms using the supplied 5mm hex key.
---|---
Hide those cables
| You can tuck away those unsightly cables into the bracket
arm itself.
Put the cables through the pole cable clip and monitor arm cable clips
as shown in the diagram.
---|---
Give us a call
| What? You mean this Installation Guide didn’t have ALL
the answers? Speak to us! We’d love to help you get up and running as quickly
as possible. Call our After Sales Support on 1300 886 649.
Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
---|---
| Your new Monitor Bracket is ready to enjoy!
Well done, you made it.
Now sit back and relax… your new monitor bracket is automatically covered by a
1-year warranty.
How nice!
---|---