Polar Windshield De-Icer Spray User Guide

Table of Contents

Polar-Windshield-De-Icer-Spray-FIG-1

Product: DE-ICER
Function: Removes Ice & Frost
Performance Advantages:
- Prevents re-freezing
- Fast and effective
- Instant melting of ice and frost
- Does not affect automotive paintwork
- Works down to -4°F
Color Range: Clear
Pack Size: 17oz.
Shelf Life: Keeps for up to 2 years when stored correctly

Preparation and Application:

Remove all loosely adhering ice, snow, sleet, slush, etc., with a scraper or similar tool.
Shake the can thoroughly before use.
Apply the de-icer directly to the area from a distance of 12 inches.
Allow the ice to melt and dry the surface with a cloth.
Repeat application if necessary.

Precautions:

Flammable – keep away from sources of ignition.
Ensure good ventilation during application – use outdoors or in a well-ventilated area.
Wear gloves, goggles, and suitable protective clothing.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Keep out of reach of children.

Can this de-icer be used on all surfaces?
The de-icer is suitable for use on all hard, impervious surfaces including windshields, side and rear screens, mirrors, gates, etc. It is also suitable for defrosting locks, hinges, and other mechanisms affected by ice.
What should I do if I experience skin dryness or cracking after using the de-icer?
If repeated exposure to the de-icer causes skin dryness or cracking, discontinue use and consult a healthcare professional. Avoid prolonged skin contact with the product.
How should I store the de-icer?
Store the de-icer in a cool, dry place away from direct sunlight and heat sources. Ensure the product is sealed properly to maintain its effectiveness.

View our handy ‘how-to’ video to understand how to get the best results from our products.

Polar-Windshield-De-Icer-Spray-FIG-2

Step One
Remove all loosely adhering ice, snow, sleet, slush etc. with a scraper or similar.
Step Two
Shake can thoroughly before use and apply directly to the area from a distance of 12 inches.

USES
- On all hard, impervious surfaces including windshield, side and rear screens, mirrors, gates etc.
- Suitable for defrosting locks, hinges and other mechanisms affected by the effects of ice.
COLOR RANGE CLEAR
PACK SIZE 17oz.
DRYING TIME
- No loss of application pressure under cold conditions of use.
- Instant melting of ice and frost.
- Inclusion of ammonia provides good detergent properties.
- Suitable for use at temperatures down to -4°F. Contains additives to help prevent re-freezing. Does not affect automotive paintwork.
- Does not affect windshield rubbers.
SHELF LIFE Keeps for up to 2 years when stored correctly.

PREPARATION AND APPLICATION

Remove all loosely adhering ice, snow, sleet, slush etc. with a scraper or similar.
Shake can thoroughly before use and apply directly to the area from a distance of 12 inches.
Allow the ice to melt and dry the surface with a cloth.
Repeat if required.

PRECAUTIONS

Flammable keep away from sources of ignition.
Ensure good ventilation during application – use outdoors or in a well ventilated area.
Wear gloves, goggles and suitable protective clothing.
In case of contact with eyes rinse immediately with plenty of water and seek medical advice. Remove contact lenses if present and easy to do.
Remove splashes from the skin with a recognised hand cleaner or plenty of soap and water.
Keep out of reach of children.
May cause drowsiness or dizziness.
Avoid breathing vapour/spray.
Dispose of contents/container in accordance with local regulations. Repeated exposure may cause skin dryness or cracking.
CAUTION: Pressurised container: May burst if heated. Protect from sunlight. Do not expose to temperatures exceeding 122°F. Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Use only as directed.

SAFETY

Good working practices should be followed.
The specification and coverage rates are given in good faith and are based on our experience and knowledge but without liability.
As Polar Specialist Coatings Limited has no direct control over the methods employed by the user in applying its products, any warranty either written or implied is given in good faith and can only cover the material itself.
If in doubt regarding any of the above points, please contact our technical services department for advice.
A Material Safety Data Sheet is available on request.
It is the users responsibility to ensure that this data sheet is current prior to using the product.

Innovate Pioneers for Specialist Coatings

Polar provides you with the expertise and quality to transform & renovate all your DIY projects.
Formerly the creators ofJohnstone’s paints with over 130 years manufacturing experience…
We deliver reliable, high-performance paints that revive, protect & maintain your home.