POLAR 1134 Clear Gloss Flawless Lacquer Spray User Guide

Table of Contents

Specifications

Product Name: FLAWLESS LACQUER
Performance Advantages: Durable Protective Clear Coat, UV, Weather & Scratch Resistant, Multi-Surface Use, Rapid Drying, Non-Yellowing & Durable
Color Range: Crystal Clear
Finishes: Matt & Gloss
Pack Size: 14oz.
Spreading Rate: 14oz covers 21 Sq ft. depending on the nature and porosity of the surface
Drying Time: Touch Dry in 15-30 minutes. Recoatable after 20 minutes
Shelf Life: Keeps for up to 2 years when stored correctly

Preparation and Application

Cleaning: Remove as much product as possible from application equipment before cleaning. Clean equipment immediately after use with warm soapy water and rinse thoroughly. Do not empty product into drains or watercourses.
Precautions: Keep away from sources of ignition, ensure good ventilation during application, wear gloves, goggles, and suitable protective clothing. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of reach of children.

Application Steps

Step One: Clean the surface thoroughly removing all traces of greases, oils, dirt, grime, and unsound existing coatings.
Step Two: Shake the can thoroughly for at least two minutes. Apply sparingly from a distance of 6-10 inches.
Step Three: Apply 2 to 3 light coats as necessary to achieve total and even coverage.

FAQ

Q: How long does it take for the FLAWLESS LACQUER to dry?
A: The FLAWLESS LACQUER is touch dry in 15-30 minutes and recoatable after 20 minutes.
Q: What should I do if I get the product in my eyes?
A: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Q: How should I store the FLAWLESS LACQUER?
A: Store the FLAWLESS LACQUER in secure dry conditions inaccessible to children or animals. Containers should be kept closed during storage.

FLAWLESS LACQUER
DEFENSIVE & PROTECTIVE

View our handy ‘how-to’ video to understand how to get the best results from our products.

POLAR-1134-Clear-Gloss-Flawless-Lacquer-Spray-
FIG-3

Step One
Clean the surface thoroughly removing all traces of greases, oils, dirt, grime and unsound existing coatings.
Step Two
Shake the can thoroughly for at least two minutes. Apply sparingly from a distance of 6-10 inches.
Step Three
Apply 2 to 3 light coats as necessary to achieve total and even coverage.

FLAWLESS LACQUER

USES

Ready for use on most bare and coated substrates, including wood, metals, plastics, and on such applications as protection of electronic components, paper documents etc.
For interior and exterior use.
Spray can application.
Do not apply when the air or substrate temperatures are likely to fall below 46°F or when the relative humidity is above 80% during application or the drying period.

COLOR RANGE

FINISHES

PACK SIZE

SPREADING RATE

DRYING TIME

SHELF LIFE

PREPARATION AND APPLICATION

Clean the surface thoroughly removing all traces of greases, oils, dirt, grime and unsound existing coatings.
Shake can thoroughly.
Hold upright, and spray evenly onto the surface from a distance of 6-10 inches.
If nozzle blocks, invert can and pulse spray until clear.
Allow to dry for between 15 and 30 minutes.
When further coats are required, allow 20 minutes between applications.
Where over-coating of a previously applied alkyd coating is suspected, always test for suitably of use by applying several coats of clear acrylic lacquer in an inconspicuous area, and allow to dry thoroughly to establish absence of wrinkling and other surface defects.
After use, always invert can and depress actuator to prevent nozzle blockage.

Remove as much product as possible from application equipment before cleaning. Replace lid firmly.
Clean equipment immediately after use with warm soapy water and rinse thoroughly.
Some local authorities have special facilities for the disposal of waste coatings.
Do not empty product into drains or watercourses.

Flammable keep away from sources of ignition. Ensure good ventilation during application – use outdoors or in a well-ventilated area.
Wear gloves, goggles and suitable protective clothing.
In case of contact with eyes rinse immediately with plenty of water and seek medical advice. Remove contact lenses if present and easy to do. Remove splashes from the skin with a recognised hand cleaner or plenty of soap and water.
Keep out of reach of children.
May cause drowsiness or dizziness.
Avoid breathing vapour/spray.
Dispose of contents/container in accordance with local regulations.
Repeated exposure may cause skin dryness or cracking. Contains acetone.
CAUTION : Pressurised container: May burst if heated. Protect from sunlight. Do not expose to temperatures exceeding 122°F. Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Use only as directed.

Please refer to the Safety, Health and Environmental Information on the container.
Take special precautions during the surface preparation of pre 1960’s painted surfaces as they may contain harmful lead.
For further information contact the Customer Relations Team.
When preparing the surfaces avoid the inhalation of dust and/or metal particles. Wear a suitable facemask.
Material Safety Data Sheets for this and all other Polar Specialist Coatings products are freely available from our website: www.polarcoatings.co.uk.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage. Do not empty into drains, watercourses or access routes to septic tanks.

Road 3, Winsford Industrial Estate, Winsford, Cheshire. CW7 3PD info@polarcoatings.co.uk | 0161 850 0379

Innovate Pioneers for Specialist Coatings

Polar provides you with the expertise and quality to transform & renovate all your DIY projects.
Formerly the creators of Johnstone’s paints with over 130 years manufacturing experience
We deliver reliable, high-performance paints that revive, protect & maintain your home. Ian Johnstone manufacturing for Johnstone’s Paints 1946