ORTEC Bluetooth Remote Control & Touchpad User Manual
- June 6, 2024
- ORTEC
Table of Contents
ORTEC Bluetooth Remote Control & Touchpad
This manual is designed to assist you in installing and using the Bluetooth•
touchpad. Information in this document has been carefully checked for
accuracy: however, no guarantee is given to the correctness of the contents.
The information in this document is subject to change without notice.
Edition
1st Edition. Copyright © Copyright 2020 This document contains proprietary
information protected by copyright. All rights are reserved. No part of this
manual may be reproduced by any mechanical. electronic or other means, in any
form, without prior written permission of the manufacturer.
Trademarks
All trademarks and registered trademarks are the property of their respective
owners.
Federal Communications Commission Statement
This device complies w,th FCC Rules Part 15. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received. including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by doing one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. The
antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End-users must follow the specific oper<lting
instructions for S<ltisfying RF exposure compli<lnce. To maintain compliance
with FCC exposure compliance requirements, please follow operation
instructions as documented in this manual.
System Requirements:
- iOS / Android OS / Mac OS / Windows OS
- Bluetooth 3.0 or higher
Package includes
Bluetooth Remote Control & Touchpad • 1 USB-C to USB-A charging cable • 1
Manual• 1
Note
There is a power switch under the Bluetooth Remote Control & Touchpad. When
not in use. please turn to OFF to save battery power.
Technical Specifications
Logo Name
Bluetooth chip
| Bluetooth Remote Controller
CYPRESS : CYW20730 A2
---|---
Bluetooth Technology meets
SIG DID No
Operation distance
| VS.1 D051804
10 meters
Output power| Bluetooth Power Class 2
Battery Capacity| Li-ion battery 160 mA
Operating Voltage| 3.3-4.2 V
Power Consumption| Working: under Touchpad < 10 mA Sleep: under <
100 uA
Charging Time| about 1.5 – 2 hrs
Weight|
Dimension| 123.5 x 40 x 8 mm
Appearance Function Description
Bluetooth Pairing
- Turn on the power, and press ID key to enter pairing mode.
- Pairing blue light flashes.
- PS: Paring will stop when not paired. if needed. press ID key for pairing again.
- Turn on Bluetooth from iPad / iPhone / MacBook / PC
- Search device
- Select “Bluetooth Remote Controller” .
- Pairing complete.
Key Function Description
Touchpad Description
LED Lights
OS Switching Steps
Note
- After 5 minutes of non-operating, the Bluetooth Remote Controller will go to sleep mode. Press any key or touchpad to wake up Bluetooth.
- When Power Switch turns to ON. X both Blue lights will be on and then off after 1 second.
- Battery low: Pair LEO Blue light shows fast flashing. charging: Pair LEO Red light on. (Lights are out after fully charged.)