CROSSIO HLP084 Modern Linear Chandelier Black Hanging Pendant Light Owner’s Manual
- May 15, 2024
- CROSSIO
Table of Contents
CROSSIO HLP084 Modern Linear Chandelier Black Hanging Pendant Light
Product Information
Specifications:
- Product: Crystal Chandelier
- Model No.: HLP084
- Bulb Base: G9
- Maximum Bulb Wattage: 7W
- Dimmable: Yes (with dimmable bulbs and compatible dimmer switch, not included)
- Bulbs Included: No
Product Usage Instructions
1. Installation Preparation
Before starting the installation process, ensure you have the following tools ready:
- Ladder
- Pliers
- Wire Strippers
- Screwdrivers
- Power Drill (optional)
- Drill Bit (optional)
2. Mounting & Assembly
Follow these steps for mounting and assembly:
- Test the fixture before installation to ensure it is working correctly.
- Turn off the power at the circuit box to avoid electric shock.
- Attach the Mounting Plate to the junction box using mounting screws (not included).
- Connect fixture wires to house wires with a plastic wire connector and wrap the connection with electrical tape.
- Attach the Canopy to the affixed Mounting Plate using a cap nut.
- Note: This item is not dimmable; do not use a dimmer switch.
3. Fixture Assembly
Follow these steps for fixture assembly:
- Pass the main line through the center rod, then install the center rod on the lamp body.
- Connect the rod with a tube.
- Pass the main line through the ceiling plate, and install the ceiling plate on the center column.
- Install the bulbs, then install the lampshade on the socket.
Frequently Asked Questions
- Q: What type of bulbs does this chandelier use?
- A: This chandelier uses G9 bulb base, and LED bulbs up to 7W are required.
- Q: Is this chandelier dimmable?
- A: Yes, this chandelier is fully dimmable when used with dimmable bulbs and a compatible dimmer switch (not included).
More info
Please contact us in following format:
- Order platform name and Order ID NO.
- Problem details with picture / video if possible
Email: [email protected]
Safety Rules
WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF;
EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF. TURNING THE
POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL
SHOCK.
NOTE: The important safeguards and instructions appearing in this manual are
not meant to cover all possible conditions or situations that may occur. It
must be understood that common sense, caution, and care, are factors which
cannot be built into any product. These factors must be supplied by the
person(s) installing this unit.
READ & SAVE THESE INSTRUCTIONS
CAUTION: Before assembling the lighting fixture, refer to the section titled Wiring Connections. If you feel you do not have enough electrical wiring experience, either refer to a do-it–yourself wiring handbook or have your lighting fixture installed by a qualified, licensed electrician.
UNPACK THE PACKAGE
Check the contents to be sure everything is included Tools Needed: Slotted screwdriver, Adjustable wrench, Step ladder, Wire cutters, wiring supplies as required by electrical code.
INSTALLATION & OPERATION INSTRUCTIONS GENERAL
Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box. Turning the power off using the light switch is not sufficient to prevent electrical shock. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician. Remove the fixture and the mounting packages from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions. Be sure to read these installation instructions and review the diagrams thoroughly before installation.
- LIGHT BULBS REQUIRED This fixture uses G9 bulb base, LED bulbs required up to7W. Fully dimmable when used with dimmable bulbs and a compatible dimmer switch (not included).
- BULBS ARE NOT INCLUDED IN THIS ITEM. Please purchase the right bulbs you need.
Installation Preparation
Tools You Need
If mounting to a support structure, you will also need the optional tools
Mounting & Assembly
Note: Please test the fixture before instalaltion to ensure it’s woriking properly.
- Turn off power at circuit box to avoid possible electric shock.
- Attach Mounting Plate to junction box using mounting screws (Notincluded).
- Connect fixture wires to house wires with plastic wire connector, and wrap the connection with electrical tape.
- Attach Canopy to the affixed Mounting Plate using cap nut .
NOTE: This item is not dimmable, please do not use a dimmer switch
Fixture Assembly
- Pass the main line ① through the center rod ③, and then install the center rod ③ on the lamp body ⑧. Connect the rod with a tube ④. Then pass the main line1 through the ceiling plate ②, and the ceiling plate is installed on the center column.
2. Install the Exx bulbs ⑥, then install the lamp shade ⑤ on the socket ⑦
Trouble Shooting
- Missing/Broken Parts
- Make a list of the missing/broken parts according to the packing list, take photos for broken parts, then email us for free replacements.
- Bulbs Do Not Light Up
- Check your power and switch to make sure it’s power on.
- Check the bulb to make sure it’s installed correctly.
- Change a new bulb.
- Check the wires to make sure they are connected correctly.
- Bulbs Flicker/Noisy Operation
- Check the bulb to make sure it’s installed correctly.
- Change a new bulb.
- Make sure your bulb is dimmable if you use a dimmer switch.
- Could Not Install/Assemble
- Take photos of the ceiling/fixture, contact seller for technical support.
Clean And Care
To clean, wipe fixture with soft cloth. Spray from chemical cleaners can discolor the finish of fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.
Ordering Parts
Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from place of purchase. Use exact wording from diagrams when ordering parts.
We followed the light to a brighter and warmer place.”