CROSSIO FS6931-02 72 Inch Ceiling Fan with Lights Instruction Manual

CROSSIO FS6931-02 72 Inch Ceiling Fan with Lights

Product Specifications

• Model No.: FS6931-02
• APP Control: Applicable
• Number of Fan Blades: 2
• Number of LED Lights: 1
• Remote Control Included: Yes

Packing List:
The product includes various parts necessary for installation such as Mounting Bracket, Canopy, DownRod, Coupling Cover, Fan-motor Assembly, Iron Basin, LED Light, Lamp Shade, Remote Control, Remote Holder, Receiver, Fan blades, and Installation kit.

Safety Rules
It is important to follow safety rules provided in the manual to avoid personal injury and ensure proper installation. Make sure to use the recommended screws and washers for mounting and do not bend the blade brackets during assembly.

Installation Preparation:
Tools required for installation include a ladder, pliers, wire strippers, screwdrivers, and optionally a power drill. Ensure the fan is mounted securely to a building structure or fan-rated outlet box and follow the specified distances from walls and the floor.

Installation Steps:

Step 1 (Assemble the Blades and Cover):

1. Assembling the Blades: Attach fan blades onto the blade arm in sequence using the provided screws.
2. Assembling the Fan: Loosen set screws from the downrod hub. Align holes at the bottom of the downrod with the hubholes. Insert clevis pin into the hub, avoiding contact with wires. Secure downrod with set screws.

Contact Information

Please contact us with following information:

1. Screen shot of your order page, including product picture, name and order ID number.
2. Problem details with pictures / short video if possbile.

Email: lightingcustomercare@gmail.com

Packing List

Installation kit

Note :
Some extra hardware may be included. The quantity listed above is the number required for installation.

Safety Rules

1. Be sure the power to the wires you are working on is disconnected, either the fuse
   is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock.

2. A qualified licensed electrician is required for the installation.

3. The outlet box and support structure must be securely mounted and capable of reliably/supporting a minimum of 50 pounds. Use only UL (cUL for Canadian Installation) listed mounting boxes marked “FOR FAN SUPPORT”.

4. The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.

5. Do not operate the reversing switch while fan blades are in motion (if applicable). Fan must be turned off and blades stopped before reversing blade direction.

6. Do not place any objects in the path of the blades.

7. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.

8. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened soft cloth will be suitable for the cleaning.

9. After marking electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be spread apart with the grounded conductor on one side of the outlet box.

10. Electrical diagrams are reference only, different fan light may have different light shade and bulbs.

11. Use only our replacement parts. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

Warning:

• To reduce the risk of personal injury, use only the two steel screws and washers provided with the outlet box for mounting to the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and need to be replaced, consult a qualified electrician if in doubt.
• To reduce the risk of fire, electric shock or person injury, mount fan to outlet box marked “acceptable for fan support”.
• To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades.

Installation Preparation

Tools You Need

If mounting to a support structure, you will also need the optional tools.

What to Expect with Your Installation

Installation Step 1 (Assemble the Blades and Cover

Assembling the Blades

1. Step 1. Attach fan blade onto the blade arm with screws provided. Note: Make sure to assemble the blades in sequence and fasten the screws with equal force.

Assembling the Fan

1. Step 1. Loosen the set screws from the downrod hub but do not take off.
   • Align the holes at the bottom of the downrod with the holes in the downrod hub.
   • Carefully insert the clevis pin into the downrod hub.
   • Be careful not to jam the clevis pin against the wires inside the downrod. Insert the “R” pin into the end of the clevis pin.
2. Step 2. Fix the downrod with the set screws on the hub.

Installing the Bracket

1. Step 1. Pass the power wires through the center hole in the mounting bracket.
2. Step 2. Secure the mounting bracket to the ceiling outlet box or solid wood structure with the screws and washers provided.

Hanging the Fan

1. Step 1. Lift the downrod into the mounting bracket.
2. Step 2. Rotate the downrod until the tab in the mounting bracket is seated in the fixation slot in the downrod ball.

Installation Step 3 (Hang and Wire)

Wiring

1. Step 1. Insert the remote receiver to the bracket.
2. Step 2. Connect the wires from the fixture to the house supply wires with wire nuts, ground wire (green, green/yellow, or bare copper) to ground wire, neutral wire (white or blue) to neutral wire, and hot wire (black or brown) to the hot wire.
   Wrap the connection with electrical tape.

Note :

1. This fan only needs one set of input wires (black, white, and ground wire).
   Both of the fan and lights will be controlled by the remote controller.

2. This fan can only be connected to an on/off switch if you have one, not a dimmer switch.

Installation Step 4 (Install Canopy)

Attaching the Canopy

1. Step 1. Slide the coupling cover downward to cover the downrod hub.
2. Step 2. Slide the canopy up to the ceiling and attach it to the mounting bracket with the screws provided. Tighten all screws securely.

Install and Wire the Light

1. Step 1. Install the lamp panel and lamp shade in the order of disassembly.
2. Step 2. Connect the wire terminal to the interface on the light panel.

Installation Step 5 (Install Canopy and Light Shade)

Install the Lampshade

1. Step 1. Rotate the Lampshade clockwise to secure it to the lamp panel.
   

Installation Step 6 (Install the Remote Holder)

1. Step 1. Install the remote holder onto the wall with screws.

Note： Insert 2 batteries
before using:
AAA 1.5V battery x 2pcs (not included)

Remote Control Instructions

1. Temperature display.
2. Turn off the fan.
3. Fan speed increase.
4. Fan speed reduction.
5. Switch the light color: warm white→cool white→whitelight.
6. Turn on/off the light.
7. Increase the brightness of the light source.
8. Fan moves forwards or reversely.
9. 1-8H for timing the fan.
10.  Reduce the brightness of the light source.

REMOTE SIGNAL PAIRING: If the remote control looses signal of the fan, press and hold the button ⑥ at the very beginning after it’s turned on from wall switch. After the fan light flashes or beeps, it’s done.

APP Control Instructions

1. Before pairing and decoding, please ensure that the device is within the coverage range of 2.4Gwifi and that your phone is connected to the 2.4Gwifi.
2. Click on the “+” button in the upper right corner of the homepage to add a device.
3. The app will automatically scan for nearby devices that can be connected, locate the de-vice, and click Add.
4. After connecting, it will automatically turn to the operation interface (which may take 1 minute).
5.  Some functions of the APP may not be applicable to this device, please refer to the func-tions supported by the device.

NOTE:
Scan the QR code and install the APP in your phone, Make sure your phone is connected to the internet and bluetooth enabled.

Trouble Shooting

1. Fan doesn’t work
   • Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
   • Check the remote control battery (not included in this package).
   • Check the circuit breaker to ensure the power is on.
   • Turn off power from the circuit breaker, then loosen the canopy and check all the con-nections according to the wiring diagram.
2. Lights Do Not Light Up / Flicker / Noisy Operation
   • Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
   • Check your power and switch to make sure it’s power on.
3. Noisy Operation
   • Re-tighten all screws on bracket.
   • Check to see if any of the blades are cracked. If so, replace the blades.
4. Remote does not work
   • Make sure the battery is installed correctly.
   • Pair the remote control again (See page 11).
   • Install 2 new batteries.

Clean And Care

To clean, wipe the fixture with soft cloth. Spray from chemical cleaners can discolor the finish of the fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.

Ordering Parts

Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from place of purchase. Use exact wording from diagrams when ordering parts.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>