CROSSIO FS6938-01 Outdoor Plug In Ceiling Fans Instruction Manual
- June 2, 2024
- CROSSIO
Table of Contents
CROSSIO FS6938-01 Outdoor Plug In Ceiling Fans
Specifications
- Model No.: FS6938-01
- APP Control Applicable
- Includes remote control
- Lighting feature included
- Installation kit with necessary hardware
Product Usage Instructions
Safety Rules
Follow the safety rules provided in the manual to prevent personal injury
or damage to the product.
Installation Preparation
Before installation, gather the necessary tools including a ladder, pliers,
wire strippers, screwdrivers, and possibly a power drill. Assess the location
for proper fan placement ensuring it meets the specified requirements.
What to Expect with Your Installation
Ensure you have the ability to secure the fan properly to the building
structure or fan-rated outlet box. Keep the specified distances from walls and
floors in mind. Check the weight of the fan and ensure angled ceilings are not
used for installation.
Installation Step 1 (Assemble the Fan)
- Pulley Assembly: Attach the pulley to the downrod following the provided instructions.
- Fan Assembly: Insert the downrod and coupling cover into the downrod hub and secure it properly.
Installation Step 2 (Mount the Bracket)
Choose between mounting options depending on your installation
setup:
- Option 1 (With Outlet Box): Fix the mounting bracket onto the outlet box as directed in the manual.
- Option 2 (With Solid Wood Structure): Secure the bracket to a solid wood structure using wood screws.
FAQ
-
Q: Can I install the fan on an angled ceiling?
A: No, angled ceilings are not supported for fan installation as per safety guidelines. -
Q: What tools do I need for installation?
A: You will need a ladder, pliers, wire strippers, screwdrivers, and possibly a power drill depending on your setup.
Packing List
| Part | Description | Quantity |
|---|---|---|
| A | Bracket | 1 |
| B | Pulley | 1 |
| C | Power Cord | 1 |
| D | Downrod | 2 |
| E | Coupling Cover | 1 |
| F | Fan Assembly | 1 |
| --- | --- | --- |
| G | Remote Control | 1 |
| H | Remote Holder | 1 |
Note: Some parts may be assembled together in the package
Installation kit
| Part | Description | Quantity |
|---|---|---|
| AA | Pair of Gloves | 1 |
| BB | Clevis Pin & “R” Pin (assembled) | 1Set |
| CC | Wood Screw (opitional) | 2 |
| DD | Machine Screw & Washer for Outlet Box (spares) | 2 |
Note: For your convenience, you may receive extra hardware.
Safety Rules
- Be sure the power to the wires you are working on is disconnected, either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock.
- A qualified licensed electrician is required for the installation.
- The outlet box and support structure must be securely mounted and capable of reli-ably /supporting a minimum of 50 pounds. Use only UL (cUL for Canadian Installation) listed mounting boxes marked “FOR FAN SUPPORT”.
- The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.
- Do not operate reversing switch while fan blades are in motion (if applicable). Fan must be turned off and blades stopped before reversing blade direction.
- Do not place any objects in the path of the blades.
- To avoid personal injury or damage to the fan and other items, be cautious when work-ing around or cleaning the fan.
- Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened soft cloth will be suitable for the cleaning.
- After marking electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be spread apart with the grounded conductor on one side of the outlet box.
- Electrical diagrams are reference only, different fan light may have different light shade and bulbs.
- Use only our replacement parts. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are to provide reasonable protection against harmful interference in a resi-dential installation. This equipment generates, uses and can radiate radio frequency en-ergy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.
Warning:
To reduce the risk of personal injury, use only the two steel screws and
washers provided with the outlet box for mounting to the outlet box. Most
outlet boxes commonly used for the support of lighting fixtures are not
acceptable for fan support and need to be replaced, consult a qualified
electrician if in doubt.
To reduce the risk of fire, electric shock or person injury, mount fan to
outlet box marked “acceptable for fan support”. To reduce the risk of personal
injury, do not bend the blade brackets (also referred to as flanges) during
assembly or after installation. Do not insert objects in the path of the
blades.
Installation Preparation
Tools You Need
If mounting to a support structure, you will also need the optional tools.
What to Expect with Your Installation
Installation Step 1 (Assemble the Fan)
Note: If the fan is installed using a hook method, this step should be
replaced with steps 1 and 2 of option 3 in Installation Step 2 (Mount the
Bracket).
Attach the Pulley
Step 1. Remove the Clevis Pin and “R” Pin from the pulley assembly.
Step 2. Install the downrod onto the pulley assembly as shown in the top
right corner of Fig 1.
Step 3. Reinstall the Clevis Pin back onto the pulley assembly, tighten
the nut on the Clevis Pin, and reinsert the “R” Pin into the Clevis Pin.
Assemble the Fan
Step 1. Insert the downrod and Cou-pling Cover connected to the pulley
into the downrod hub as shown in Figure 2, insert the Clevis Pin, and reinsert
the “R” Pin into the Clevis Pin.
Step 2. Tighten the screw on the downrod hub that is used to secure the
downrod.
Step 3. Simply place the Coupling Cover at the bottom of the downrod.
Installation Step 2 (Mount the Bracket)
Option 1: With Outlet Box
Step 1. Remove the reserved screws on the Bracket, align the holes on the
pulley component with the holes on the mounting Bracket, then re-install the
screws and tighten the nuts.
Step 2. Fix the mounting bracket onto the outlet box with screws from the
outlet box.
Option 2: With Solid Wood
Fix the mounting bracket onto the solid wood structure with 2 wood screws.
Option 3
Option 3: With Ceiling Hook
Step 1. As shown in Fig 1, re-move the two pairs of Clevis Pins and the
“R” Pin from the pulley assembly, and take out the U-shaped hook from the
pulley assembly.
Step2. Assemble the remaining parts of the pulley assembly and the
downrod using the Cle-vis Pins and “R” Pin, as shown in Fig 2.
Step 3. The assembly method for the downrod and downrod hub can be
referred to in the second point of Installation Step 1 (Assemble the Fan).
Step 4.Hang the installed pulley directly onto the hook as shown in Fig 3
to secure it.
Installation Step 3 (Connect the Wires)
Align the holes, connect the power wires, and then tighten the nut on the power wire.
Installation Step 4 (Install the Remote Holder)
- Insert 2 batteries before using: AAA 1.5V battery x 2pcs (not included)
- Install the remote holder onto the wall with screws.
Remote Control Instructions
NOTE:
Please insert 2 batteries before using. AAA 1.5V battery x 2pcs (not included)
- ① Light On/Off: Press to turn the light on or off.
- ② Quick Light Color Switch: Press to quickly switch between light colors.
- ③ ⑥ Light Brightness +/-: Press to +/- the brightness of the light.
- ④ ⑪ Light Color Temperature +/-: Press to +/- the light color temperature.
- ⑦ Fan Forward/Reverse: Press to change the direction of the fan blades.
- ⑧ Fan Speeds: Press to adjust the fan speed from 1 to 6.
- ⑨ All Off: Press to turn off the fan and light.
- ⑩ Night Mode: Press to dim the lights.
- ⑫ Fan Timer: Press to set the timer for the fan to turn off.
- ⑬ Wind Direction: Press to turn on/off the wind guide wheel to change the wind direction.
- ⑭ Fan Off: Press to turn off the fan.
Signal Pairing: If the remote control loses signal from the fan, press and hold the Signal Pairing button ⑤ at the beginning after turning on the wall switch until the light flashes. This will pair the remote control to the fan.
APP Control Instructions
Install the “Fan Lamp Pro” app from Google Play, Apple App Store, or other app stores by scanning the QR code or searching for the app name. Ensure that your phone is connected to the inter-net and Bluetooth enabled.
Trouble Shooting
Fan does not work
- Make sure the fixture is connected to an ON/OFF wall switch, not a dimmer switch.
- Check the remote control battery (not included in this package).
- Check the circuit breaker to ensure the power is on.
- Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram.
Lights do not light up / flicker / noisy operation
- Make sure the fixture is connected to an ON/OFF wall switch, not a dimmer switch.
- Check your power and switch to make sure it’s powered on.
Noisy operation
- Re-tighten all screws on the bracket.
- Check to see if any of the blades are cracked. If so, replace the blades.
Remote does not work
- Make sure the battery is installed correctly.
- Pair the remote control again (See page 9).
- Install two new batteries.
Clean And Care
To clean, wipe the fixture with soft cloth. Spray from chemical cleaners can
discolor the finish of the fixture. Do not use scouring pads, powders, steel
wool or abrasive paper to clean this fixture.
Ordering Parts
Keep this manual for future reference, and in case replacement parts are
needed. Available parts can be ordered from place of purchase. Use exact
wording from diagrams when ordering parts.
Contact Information
Please contact us with following information:
- A screenshot of your order page, including the product picture, name, and order ID number.
- Details of the problem, including pictures or a short video if possible.
Email: lightingcustomercare@gmail.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>