CROSSIO CFL-1061-01 Low Profile Ceiling Fan with Light Instruction Manual

May 15, 2024
CROSSIO

CROSSIO CFL-1061-01 Low Profile Ceiling Fan with Light Instruction Manual
CROSSIO CFL-1061-01 Low Profile Ceiling Fan with
Light

Packing List

Packing List

Name QTY Name QTY
① Mounting Bracket 1 ⑤ LED Panel 1
② Fan Housing 1 Ⓐ Light Shade 1
③ Fan Blade 3 ⑦ Remote Control 1
④ Blade Cover 1 ⑧ Hardware Bag 1 Set

NOTE:

  1. Ceiling fan style may be different from the diagram.
  2. Remote control requires AAA 1.5V battery x 2pcs (not included).
  3. Mounting bracket, blade cover, LED panel and light shade may be pre-assembled onto the fan housing in the package.

Safety Rules

  1. Be sure the power to the wires you are working on is disconnected, either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock.
  2. A qualified licensed electrician is required for the installation.
  3. The outlet box and support structure must be securely mounted and capable of reliably /supporting a minimum of 50 pounds. Use only UL (cUL for Canadian Installation) listed mounting boxes marked “FOR FAN SUPPORT”.
  4. The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.
  5. Do not operate reversing switch while fan blades are in motion (if applicable). Fan must be turned off and blades stopped before reversing blade direction.
  6. Do not place any objects in the path of the blades.
  7. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
  8. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened soft cloth will be suitable for the cleaning.
  9. After marking electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be spread apart with the grounded conductor on one side of the outlet box.
  10. Electrical diagrams are reference only, different fan light may have different light shade and bulbs.

Installation Preparation

Tools You Need
Tools You Need

If mounting to a support structure, you will also need the optional tools.

What to Expect with Your Installation
What to Expect with Your Installation

Assembling the Fan Blades

Assembling the Fan Blades

Step 1. Take out the fan housing and bracket assembly from the box.
Step 2. Remove the blade cover from the fan housing by loosing the screws on it.
Step 3. Secure the fan blades onto the fan housing with screws provided. Make sure the beveled side facing the ground.
Step 4. Place the blade cover back to the fan housing with screws taken off.

NOTE:
Make sure to assemble the blades in sequence and fasten the screws with equal force.

Installing the Fan

NOTE: THIS FAN ONLY NEEDS ONE SET OF INPUT WIRES (black, white and ground wire). Both of the fan and lights will be controlled by the remote controller. The wall switch is not able to control the fixture full functionally.

THIS FAN CAN ONLY BE CONNECTED ONTO ON/OFF SWITCH IF YOU HAVE ONE, NOT SUITABLE FOR DIMMAER SWITCH.

Step 1. Install the Bracket
Take out the mounting bracket from the motor housing by loosing the screws on the side. Secure the bracket to the ceiling outlet box with the screws and washers provided with your outlet box (Fig. 1).
Install the Bracket

Step 2. Connect the Wires
Connect the black wire from the remote receiver to your house live wire, white wire to your neutral wire, bare copper/ green/ yellow and green wire to your ground wire. Spread the wires apart so that the live wires are on one side of the outlet box and the neutral wires are on the other side (Fig. 2).
Connect the Wires

Step 3. Attach the Ceiling Fan
Attach the ceiling fan to the mounting bracket on the side of motor housing with screws provided (Fig. 3)
Attach the Ceiling Fan

Step 4. Connect the LED Panel
Connect the wires from LED panel to the fan housing with wire connectors. Attach the light shade onto the blade cover by rotating clockwise (Fig. 4).
Connect the LED Panel

Remote Control Instructions

Remote Control Instructions

NOTE:
Please insert 2 batteries before using.
AAA 1.5V battery x 2pcs (not included)

  • Turn on/off the light.
  • Quick switch of the light color: Yellow Light→White Light→Natural Light
  • ③⑫ Adjust the light color temperature.
  • SETUP: remote signal pairing. If the remote control looses signal of the fan, press and hold this button at the very beginning after it’s powered on from wall switch. After the fan flashes or beeps, it’s paired successfully.
  • ⑤⑪ Adjust the brightness of the light.
  • Fan moves forwards or reversely.
  • ⑦⑧⑯ Fan speed.
  • Turn off fan including the light.
  • Night mode, lights will be dimmed when press this button.
  • Timing for 2 hours for the fan.
  • Natural wind of the fan, fan speed will change automatically when use this function.
  • Turn off the fan.

APP Control Instructions

NOTE: Scan the QR code and install the APP in your phone, or search and install “FanLamp Pro” from Google Play, Apple App and other  APP stores.
Make sure your phone is connected to the internet and Bluetooth enabled.

Pair button. Click it within 5 seconds after the fan is powered on from wall switch. After the fan flashes or beeps, it has been successfully paired with the phone, it can be controlled through it.

Slide to change the fan speed.
Slide to change the brightness of the light.
Quick switch for “White” light color.
Quick switch for “Yellow” light color.
Quick switch for “Natural” light color.
Night mode, dim the lights.
Fan moves forwards.
Change the direction of the wind (Not applicable on this fan).
Timing the fan.
Natural wind: fan speed will change automatically when use this function. Sleeping wind (Not applicable on this fan).
Fan moves reversely.
Turn on/off the light.
Turn on/off the fan.
Unpair button. Click it within 5 seconds after the fan is powered on. After the fan flashes or beeps, it has been successfully unpaired with the phone.

Trouble Shooting

  1. Fan doesn’t work
    • Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
    • Check the remote control battery (not included in this package).
    • Check the circuit breaker to ensure the power is on.
    • Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram.
  2. Lights Do Not Light Up / Flicker / Noisy Operation
    • Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
    • Check your power and switch to make sure it’s power on.
  3. Noisy Operation
    • Re-tighten all screws on bracket.
    • Check to see if any of the blades are cracked. If so, replace the blades.
  4. Remote does not work
    • Make sure the battery is installed correctly.
    • Pair the remote control again (See page 8).
    • Install 2 new batteries.

Clean And Care

To clean, wipe the fixture with soft cloth. Spray from chemical cleaners can discolor the finish of the fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.

Contact

Please contact us with following information:

  1. Screen shot of your order page, including product picture, name and order ID number.
  2. Problem details with pictures / short video if possbile.

Email: lightingcustomercare@gmail.com

Installation Video Applicable
QR Code
APP Control Applicable

CROSSIO Logo

Documents / Resources

| CROSSIO CFL-1061-01 Low Profile Ceiling Fan with Light [pdf] Instruction Manual
CFL-1061-01 Low Profile Ceiling Fan with Light, CFL-1061-01, Low Profile Ceiling Fan with Light, Profile Ceiling Fan with Light, Ceiling Fan with Light, Fan with Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

CROSSIO User Manuals

Related Manuals