CROSSIO CXC001BL-2A Modern Black Caged Flush Mount Ceiling Light Installation Guide

CROSSIO CXC001BL-2A Modern Black Caged Flush Mount Ceiling Light

Please contact us with following information:

1. Screen shot of your order page, including product picture, name and order ID number.
2. Problem details with pictures / short video if possbile.
   Email: lightingcustomercare@gmail.com

Scan for Online Installation Video
Note: Product in the video may be different from this one.

Packing List

To enhance user convenience, the product is delivered fully assembled, eliminating the need for any setup.

Installation Kit

Note:
Additional hardware may be included. The quantity listed above indicates the number required for the installation.

Safety Rules

• WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF. TURNING THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.
• NOTE: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions or situations that may occur. It must be understood that common sense, caution, and care, are factors which cannot be built into any product. These factors must be supplied by the person(s) installing this unit.

READ & SAVE THESE INSTRUCTIONS
CAUTION: Before assembling the lighting fixture, refer to the section titled Wiring Connections. If you feel you do not have enough electrical wiring experience, either refer to a do-it–yourself wiring handbook or have your lighting fixture installed by a qualified, licensed electrician.

INSTALLATION & OPERATION INSTRUCTIONS GENERAL

• Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box.
• Turning the power off using the light switch is not sufficient to prevent electrical shock.
• All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper
  electrical wiring connections, obtain the services of a qualified electrician.

Tools You Need

Mounting and Wiring

Note: Please test the fixture before installation to ensure it is working properly.

1. Turn off power at the circuit box to avoid possible electric shock.
2. Secure the fixture to the junction box using mounting screws (not included).
3. Connect fixture wires to outlet box wires with wire nuts (referenced as ③), brass to ground wire, white to neutral wire, black to hot wire. Wrap the connectors with electri cal tape separately.
4. Attach the canopy to the affixed mounting plate (referenced as ①) using a cap nut (ref erenced as ④).

Light Source Installation

Install the Bulbs
(E26 x 2, Max 60W each, LED recommended, not included).

Trouble Shooting

• Missing or Broken Parts
  Make a list of the missing/broken parts according to the packing list, take photos for broken parts, then email us for free replacements.

• Bulbs Do Not Light Up, Flicker, or Operate Noisily

  • Ensure that the power is on and the switch is operational.
  • Verify that the bulb is installed correctly.
  • Replace the bulb with a new one.
  • Inspect the wires to ensure they are properly connected.
  • If using a dimmer switch, confirm that the bulb is compatible with dimming features.

• Installation Issues
  Photograph the ceiling and contact the seller for technical support.

Clean and Care

1. Ensure that the power is turned off and the bulb has cooled before handling.
2. Wipe clean with a dry cloth or a mild soapy solution. Do not use corrosive cleaners.

Ordering Parts

Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from place of purchase. Use exact wording from diagrams when ordering parts.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>