anko 43264315 Spiral Running Maze Instruction Manual

anko 43264315 Spiral Running Maze

Important Information

WARNING: CONTAINS LEADS WITH FUNCTIONAL SHARP POINT.

WARNING: FOR SAFETY REASONS, REMOVE ALL TAGS, LABELS AND PLASTIC FASTENERS BEFORE GIVING THIS TOY TO YOUR CHILD.

WARNING: BATTERIES ARE TO BE INSERTED WITH THE CORRECT POLARITY (+ AND -i DO NOT MIX DIFFERENT TYPES OF BATTERIES OR NEW AND USED BATTERIES. NON- RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED.
RECHARGEABLE BATTERIES ARE ONLY TO BE CHARGED BY AN ADULT.
RECHARGEABLE BATTERIES ARE TO BE REMOVED FROM THE TOY BEFORE BEING CHARGED. THE SUPPLY TERMINALS ARE NOT TO BE SHORT-CIRCUITED. REMOVE BATTERIES FROM THE TOY WHEN NOT IN USE FOR AN EXTENDED TIME OR WHEN BATTERIES BECOME EXHAUSTED. BATTERY INSTALLATION BY AN ADULT IS REQUIRED. DISPOSE OF BATTERIES RESPONSIBLY. DO NOT DISPOSE OF IN FIRE

WARNING:

CHOKING HAZARD- SMALL PARTS. NOT FOR CHILDREN UNDER 3 YRS.

WARNING:

CHOKING HAZARD- TOY CONTAINS MARBLES. NOT FOR CHILDREN UNDER 3 YRS.

PRODUCT MAY VARY SLIGHTLY FROM IMAGE SHOWN.
PLEASE KEEP PACKAGING FOR FUTURE REFERENCE.

To insert batteries please unscrew battery cover with a screw driver. Insert the required batteries in accordance with battery polarity with + and – ends in the right position and then fix screw on the battery door to close the battery compartment case.

Please retain this information and this insert for future reference.

REQUIRES 2 x 1.SV AA BATTERIES (NOT INCLUDED~

Educational Hints

The spiral running maze is a traditional game for practicing hand coordination. It’s a game for practicing your problem-solving capability and planning skills. Player(s) need to start from the starting point and find a path to the end point. Different from a traditional maze, gravity takes part in this maze set. Player(s) need to control the maze rotation direction to guide the marble to the destination using gravity instead of pointing it to the destination. Hand-eye coordination is essential as they are needed to observe the marble, analyze the path and control the maze running direction at the same time.

Design Your Own Maze

Designing a maze is sometimes more difficult than cracking a maze. It challenges player’s creativity and understanding of this special maze. Open the screen and use the flaps to build your own maze. Challenge & crack the maze with friends.

Some Examples

COMPONENTS IN THIS KIT

• lx battery compartment

• lx rotation controller

• 4x spring connectors

• lx box base with holes

• lx reusable box

• lx gearbox

• lx maze back side

• lx maze front side

• 40x blocks

• 1x Ferris wheel front side

• 1x Ferris wheel back side

• lx drop down track

• 2x marbles

• 1x sticker

• 2x connecting bridges

Please Nate : Connecting Bridge is only used when you want to connect the box base to another box base to create more functions)

Assembling Spiral Running Maze

Follow the below steps as figures shown.

BASIC CONNECTION PRINCIPLE

Wiring connections| Spring (c1)| Spring (c2)| Spring (c3)| Spring (c4)
---|---|---|---|---
Battery Compartment (a)| | | red| black
Rotation Controller (b) I (In front View) aI| Left Side| | | red| black
Right Side| black| red| |
Gearbox (f)| black| red| |

How to play

1. Assemble the maze set according to the pictures provided. Insert 2 x AA batteries into the battery case.
2. Insert the flaps following the demonstration or design your own flaps.
3. Put the marble in the maze set.
4. Activate the maze by switching the switch to either side.
5. Use the controller to control the maze rotation. By changing its rotating direction (clockwise or anti-clockwise direction) to lead the marble into its destination: to the centre.
6. Wait for the marble to roll into the starting point and play again.
7. You can change the combination of the maze following the guidelines or create yourself a new maze. Show your creativity by building a different maze and ask your friends to try your creative maze.
8. When finished playing, please turn off the set by switching the switch in the middle and remove all the batteries from the battery case.
   

Tips: In case the marble cannot exit the maze you create after several attempts, it means that you will need to rebuild the maze.

Ensure all wires are correctly connected to the battery terminals and spring connectors as stated in the wiring sequence and connection. Bend the spring terminal over and insert the exposed shiny conductor part of the wire into the spring terminal. Make sure the wire is securely connected to the spring terminal. If the circuit does not work, check the wire and spring terminal connection to see whether they are not well connected or if the insulated plastic part of the wire has been wrongly inserted into the spring terminal.

Warning! Do not short-circuit the battery terminals and spring connectors. Otherwise it may cause overheating. Do not lock the motor or other moving parts, otherwise it may cause overheating.
If at any time in the future you should need to dispose of this product please note that waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)

Customer Support

KEYCODE: 43-264-315
MADE IN CHINA
© KMART AUSTRALIA LIMITED
FOR AU / NZ: IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND.
l<MART AUSTRALIA- 690 SPRINGVALE ROAD, MULGRAVE, VIC 3170 AUSTRALIA.
KMART NEW ZEALAND – REGIONAL OFFICE C/0 KMART PAPATOETOE STORE,
HUNTERS PLAZA, GREAT SOUTH ROAD, PAPATOETOE, AUCKLAND, NEW ZEALAND.
l<MART CUSTOMER SERVICE
AU: 1800 124 125 NZ: 0800 945 995

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>