mars 98633 Mini Split Components Instruction Manual
- May 15, 2024
- MARS
Table of Contents
mars 98633 Mini Split Components
Installation Package
Mini-Split Components
MARS A/C Whips
- Assembly UL listed
- Extra long wire for easy hook up
- Bagged individually
Non-Metallic Fittings Metallic Fittings
MARS NO. | DESCRIPTION | MARS NO. |
---|---|---|
84131 | 4’ x 1/2” x 10 gauge | 84132 |
84133 | 4’ x 3/4” x 8 gauge | 84134 |
84135 | 6 x 1/2 x 10 gauge | 84136 |
84137 | 6’ x 3/4” x 8 gauge | 84138 |
84139 | 8’ x 1/2” x 10 gauge | – |
84141 | 8’ x 3/4” x 8 gauge | – |
84143 | 10’ x 3/4” x 8 gauge | – |
MARS Bulk Packaged A/C Whips, Non-Metallic Fittings
Non-metallic conduit with non-metallic fittings. These are individually packaged. Assembled with UL approved components.
- Packaged gaylord style
- Bulk box for easy access
MARS NO. | DESCRIPTION | MARS PACK |
---|---|---|
84181 | 4′ x 1/2″#10 ga. non-metallic whip UL | 90 |
84183 | 4′ x 3/4″ #8 ga. non-metallic whip UL | 60 |
84185 | 6′ x 1/2″#10 ga. non-metallic whip UL | 60 |
84187 | 6′ x 3/4″ #8 ga. non-metallic whip UL | 45 |
3 Pole Mini-Split Safety Disconnect Switch
Local codes require a disconnect switch to safely shut off power for indoor mini-split AC and Heat Pumps. The disconnect switch will break both power lines L1 and L2 along with the high voltage communicating line to meet local code requirements.
- UL 30 amp rated motor disconnect
- 3 pole
- 600V max
MARS Disconnect Boxes Side Open Pullout
MARS NO | DESCRIPTION | STD. PACK |
---|---|---|
80315 | 60 amp non-fused | 6 |
80316 | 30 amp fused | 6 |
80317 | 60 amp fused | 6 |
Front Open Pullout
- Market leader
- High quality box
- UL & CUL
- NEMA 3R, rainproof
- Single phase
- Pullout type
MARS No. 83335
Description:
Generic brand 60 amp non-fused MARS Pk: 6
Polar Pad
Condenser installations begin better with Polar Pad. The Polar Pad is a plastic pad engineered and designed as a base for HVAC equipment. The pad is injection molded from polyethylene, which is durable, strong, and lightweight. The unique design has strong, uniform ribbing along the underside. The pad is molded with a texture along the top for traction, and rounded edges on the sides to give a clean concrete look and feel.
- UV and Weather Resistance
- Engineered and Designed to Resist Cracking, Breaking and Warping
- Uniform Ribbing
- Strong, Durable and Impact Resistant
- Lightweight
- Oil and Chemical Resistant
MARS NO. | DESCRIPTION | PALLET QTY. |
---|---|---|
94740 | 18″ x 38″ x 3″ | 32 |
94777 | 24″ x 24″ x 3″ | 64 |
94778 | 24″ x 36″ x 3″ | 32 |
MARS Flexible Mini-Split Line Set Connectors
MARS flexible line set connectors provide ease of installation for mini split
indoor evaporator units. Flexible line sets allow for line set connection
prior to mounting the unit on the wall. Flexible line sets eliminate copper
line kinking during the installation process and provide for future ease of
service of the AC unit. All flex line sets are 36in. in length to facilitate
installation of wall mount evaporators.
Features
- High pressure stainless steel braided line rated to 800 psi
- R410a compatible
- 3 inch copper stubs
- 36 inch overall length
MARS NO. | DESCRIPTION | CASE QTY. |
---|---|---|
52345 | 1/4″ X 36″ Mini Split Flex Line Set | 1 |
52346 | 3/8″ X 36″ Mini Split Flex Line Set | 1 |
52347 | 1/2″ X 36″ Mini Split Flex Line Set | 1 |
52348 | 5/8″ X 36″ Mini Split Flex Line Set | 1 |
**MARS Clear Vinyl Tubing
**
MARS NO. | DESCRIPTION | CASE QTY. |
---|---|---|
79131 | 1/4” ID clear tubing 32 PSI – .375 O.D. | 100 feet |
79132 | 3/8” ID clear tubing 27 PSI – .500 O.D. | 100 feet |
79133 | 1/2” ID clear tubing 24 PSI – .625 O.D. | 100 feet |
79134 | 5/8” ID clear tubing 21 PSI – .750 O.D. | 100 feet |
79135 | 3/4” ID clear tubing 19 PSI – .890 O.D. | 100 feet |
79136 | 7/8” ID clear tubing 16 PSI – 1.015 O.D. | 50 feet |
Gotec Tattoo 10 Mini-Split Condensate Pump
With an ultra-quiet 16.4 dB sound rating, the Gotec Tattoo10 mini-split
condensate pumps are the quietest mini-split pumps available. Their small size
permits easy installation in an evaporator, above the unit in the ceiling, or
in the line-set cover.
Kit Includes – Pump, detection unit, connection tube, mounting plate, and
mounting accessories.
Features & Benefits:
- Quietest mini-split pump available (16.4 dB)
- Silent operation (16.4 dB)
- 26 Ft lift
- 2.6 gal/h capacity
- Alarm (NO/NC 8A 230V)
- For use in systems up to 24,000 BTUs
MARS NO.| VOLTAGE| MODEL| SOUND LEVEL| MAX FLOW| PUMP DIMENSIONS| DETECTION UNIT DIMENSIONS (IN.)
---|---|---|---|---|---|---
21795| 110| Tattoo 10| 16.4 dB| 2.6 gal/h| 5.9 x 2.1 x 1.1| 3.2 x 1.5 x 1.5
21796| 230
MARS NO.| | | | DESCRIPTION|
21797| Replacement Detection Unit for 21795 and 21796
MARS Heavy Duty PVC Braided Line 79131-36 Tubing
MARS NO.| DESCRIPTION| WORKING PRESSURE| BURST PRESSURE|
CASE QTY.
---|---|---|---|---
79045| 1/4″ ID – .407 OD| 120 PSI| 360 PSI| 50 Feet
79046| 3/8″ ID – .532 OD| 120 PSI| 360 PSI| 50 Feet
79047| 1/2″ ID – .673 OD| 90 PSI| 270 PSI| 50 Feet
79048| 5/8″ ID – .822 OD| 90 PSI| 270 PSI| 50 Feet
79049| 3/4″ ID – .986 OD| 90 PSI| 270 PSI| 50 Feet
MARS Universal Mini-Split Condenser Wall Mount Brackets
MARS mini-split brackets are available in four sizes to accommodate mounting of popular mini-split compressors. Bracket kits include mounting hardware and vibration absorbers for a professional installation. Pre-assembled vertical supports speed installation.
- Powder Coat Finish – resists rust and corrosion
- Mounting and attachment hardware included
- Bracket width and depth adjust to accommodate compressor size
- Vibration pads included for a durable and quiet installation
- Pre-assembled vertical supports reduce installation time
MARS NO. | SIZE H x L x W | LOAD CAPACITY (LBS) |
---|---|---|
93640 | 14.5″ x 18″ x 33.5″ | 260 |
93641 | 18″ x 22″ x 33.5″ | 330 |
93642 | 18″ x 24″ x 33.5″ | 400 |
MARS Low Profile 60A Non-Fused Disconnect
MARS side open low profile disconnect box is compact while providing easy access to the connection points. The finger safe pullout section prevents accidental contact with the live circuit. The lugs are rated for multi- conductors and are approved for use with surge protection devices.
Specifications:
- Single phase, 120/240V
- Dimensions: 6.625 x 5 x 2.50
- Tin plated copper pullout
- Lugs rated for multi-conductors
- 10,000 Amp max. rated
- NEMA 3R, rainproof
- cULus rated
MARS NO.| ****
DESCRIPTION
| STD. PACK| CASE QTY.
---|---|---|---
80301| 60 amp non-fused| 10| 10
MARS A/C Mounting Brackets
Heavy duty engineered steel A/C brackets are used for mounting A/C condensers and heat pumps on vertical walls. Brackets include mounting holes and are finished in a durable gray powder coat.
MARS NO. | **DESCRIPTION** | MARS PACK |
---|---|---|
93630 | 30″ Powder Coated Steel Bracket | 1 Pair |
93631 | 36″ Powder Coated Steel Bracket | 1 Pair |
93632 | 42″ Powder Coated Steel Bracket | 1 Pair |
93636 | 48″ Powder Coated Steel Bracket | 1 Pair |
Top Open A/C Disconnects, NEMA 3R
MARS offers both fusible and non-fusible single phase air conditioner disconnects. These units provide a disconnecting means which should be located within sight and readily accessible from the air conditioning or refrigerating equipment.
Specifications:
- Single phase
- 120/240 Volts
- Fused Disconnects – accepts type H fuse (not included)
- 10kAIC
- Enclosure material: galvanized steel
- NEMA 3R, rainproof, outdoor use
- Dimensions: 9.21” H x 5.45” W x 3.13” D
MARS NO. | **DESCRIPTION** | STD. PACK | CASE QTY. |
---|---|---|---|
83615 | 60 Amp, Non-Fused | 6 | 6 |
83616 | 30 Amp, Fused | 6 | 6 |
83617 | 60 Amp, Fused | 6 | 6 |
Mini-Split Wire
MARS
NO.| DESCRIPTION| DIA. (in.)
---|---|---
COMPACT 600 CABLE: 600V, UL, UV RATED, DIRECT BURIAL
84473| 14/4 Solid THHN Compact 600 – 50′ Roll| 0.336|
---|---|---|---
84474| 14/4 Solid THHN Compact 600 – 250′ Reel| 0.336|
84479| 14/4 Stranded THHN Compact 600V – 50′ Roll| 0.352
84480| 14/4 Stranded THHN Compact 600V – 250′ Reel| 0.352
SHIELDED LOW VOLTAGE CABLE: 300V, NEC 725/800, ETL, CMR/CL3R
84485 | 16/2 Stranded Shielded – 50′ Roll | 0.191 |
---|---|---|
84484 | 16/2 Stranded Shielded – 250′ Roll | 0.191 |
84491 | 16/4 Stranded Shielded – 50′ Reel | 0.212 |
84483 | 18/4 Stranded BC Shielded – 500′ Reel | 0.180 |
EZ-IN™ CABLE: 600V, UL, ALL PURPOSE, UV RATED, DIRECT BURIEL
84486 | 14/4 Stranded E-Z In, 600V, 50′ Roll | 0.553 |
---|---|---|
84487 | 14/4 Stranded E-Z In, 600V, 250′ Reel | 0.553 |
MARS Mini-Split Run Capacitors
MARS mini-split motor run capacitors are epoxy/resin sealed and widely used as the start-up and/or run capacitor for your motor. They feature very small dissipation factor and inherent temperature rise, high insulation resistance, and stable capacitance.
Technical Specification:
- Ambient temperature: 70° C
- Rated voltage: 450 VAC
- Capacitance tolerance: ±5
- 50/60 Hz
- Standard: IEC252-2001
MARS NO. | DESCRIPTION | DIMENSIONS HDW |
---|---|---|
12380 | 1 MFD X 450V | 1-1/2 X 1/2 X 1 |
12381 | 1.5 MFD X 450V | 1-1/2 X 1/2 X 1 |
12382 | 2 MFD X 450V | 1-1/2 X 1/2 X 1 |
12383 | 2.5 MFD X 450V | 1-1/2 X 3/4 X 1-1/4 |
12384 | 3 MFD X 450V | 1-1/2 X 3/4 X 1-1/4 |
12385 | 3.5 MFD X 450V | 1-7/8 X 3/4 X 1-3/8 |
12386 | 4 MFD X 450V | 1-7/8 X 3/4 X 1-3/8 |
12388 | 5 MFD X 450V | 1-7/8 X 7/8 X 1-3/8 |
12390 | 6 MFD X 450V | 1-7/8 X 1 X 1-1/2 |
MARS Universal Remote Control for Mini-Split Units
MARS Universal Remote will operate with virtually any mini-split produced in any region of the world. Programming is accomplished by in putting your mini- split brand code or use the easy and intuitive self learn mode to set-up the remote to operate your Mini-Split. Operates with 2 AAA batteries.
- One touch function with LCD display
- Celsius or fahrenheit display
- Clock display
- 24 Hr. on/off timer for energy savings
- Displays room temperature
- Energy saver feature
- Automatically determines heat or cool mode
MARS
NO.| DESCRIPTION| MARS PACK
---|---|---
79127| 5/8″ Diameter x 20 ft long,
Condensate Drain Line| 1
MARS Putty
MARS Putty is non-hardening, non-toxic and can be shaped by hand to any form,
and reused if necessary, for plugging openings through foundations, sealing
around electrical boxes, refrigeration tube entry and so much more.
MARS NO. | DESCRIPTION | MARS PACK | CASE QTY. |
---|---|---|---|
93520 | 1 lb. Slug – Boxed | 1 | 50 |
93521 | 5 lb. Slug – Boxed | 1 | 10 |
93522 | 2 lb. Slug – Boxed | 1 | 24 |
MARS Corrugated Condensate Drain Line
- Ideal for Ductless Mini-Split
- 5/8” Diameter, 20 Ft. Long
- Flexible Ivory
- Corrugated non-kink
MARS HVAC Surge Protective Device
The MARS SPD is designed to protect your HVAC equipment from power spikes, surges and transients. Power spikes and surges can damage compressors, control boards, sensors and ECM motors resulting in costly repairs and down time. The MARS SPD utilizes Thermally Protected MOV technology to provide safe and reliable surge protection.
Protects:
- Compressors
- Heat Pumps
- Ideal for Ductless Systems
- Inverter Boards
- ECM Motors
- Control Boards
- Transformers
- Relays
- Sensors
Features
- Easy Installation to Disconnect
- Weatherproof 4X Enclosure
- 18” Pre-stripped Leads
- Green & Red LED Status Indicators
- Thermally Protected MOVs
- 120/240V Single (Split) Phase 50/60Hz
- Short Circuit Current Rating o 22,000 Amps
- MCOV L-G 150V / L-L 300V
- Voltage Protection Rating o L-G 700V / L-L 1200V
- UL 1449 4th Edition
- Type 1 or 2 Surge Protection Rating
- 3 Year Warranty
- $7,500 Connected Equipment Warranty
MARS
NO| VOLTAGE| WIRE
CONFIGURATION| SPD
TYPE| MCOV| ENCLOSURE| UL 1449
4TH EDITION
---|---|---|---|---|---|---
83905| 120/240| L-L, L-G| 1 or 2| 2 150/300| 00 Type 4X| cULus
MARS HVAC Surge Protective Device
The MARS 83904 SPD is designed specifically for 120V furnace and air handler applications. The furnace and air handler contain components that must be protected from surges such as, ECM motors, Control Boards, Transformers. The MARS Surge utilizes thermally protected MOV technology for safe and reliable protection of equipment. The 120V Surge Device is easy to install with only 2 wires to connect.
Protects:
- Ideal for 120V Ductless Systems
- Furnace & Air Handlers
- Inverter Boards
- ECM Motors
- Control Boards
- Transformers
- Relays
- Sensors
Features:
- Easy 2 Wire Installation
- 10” Pre-stripped Leads
- Green LED Status Indicator
- Thermally Protected MOVs
- 120V Single Phase 50/60Hz
- Short Circuit Current Rating o 10,000 Amps
- MCOV L-G 150V
- Voltage Protection Rating o L-G 700V
- UL 1449 4th Edition
- Type 1 or 2 Surge Protection Rating
- 3 Year Warranty
- $7,500 Connected Equipment Warranty
MARS
NO.| VOLTAGE| WIRE
CONFIGURATION| SPD
TYPE| E MCOV| ENCLOSURE| UL 1449
4TH EDITION
---|---|---|---|---|---|---
83904| 120| L-G| 1 or 2| 150| Type 2| cULu
MARS 60 Amp Non-Fused Disconnect with Internal Surge
MARS Disconnect with integrated surge protector provides a unitized design for quick and clean installation. The metal weather resistant enclosure provides additional robustness and security. MARS Surge Protectors provide the performance necessary to protect critical components in high efficiency mini- split and unitary HVAC equipment.
Features
- Side open disconnect
- Integrated internal surge protector
- Thermally Protected MOV’s
- Metal-weather resistant enclosure
- External – Green & Red LED Status Indicators
- 3 Year Warranty
- $7,500 Connected Equipment Warranty
Specifications Disconnect:
- Single phase 240V
- 10,000 Amp rating
- NEMA 3R enclosure
- Weather proof enclosure
- Available in fused and non-fused
No. 83910 Surge Protector:
- 120/240V Single (Split) Phase 50/60Hz
- Short Circuit Current Rating o 22,000 Amps
- MCOV L-G 150V / L-L 300V
- Voltage Protection Rating o L-G 700V / L-L 1200V
- UL 1449 4th Edition
- Type 1 or 2 Surge Protection Rating
Protects:
- Compressors
- Heat Pumps
- Ideal for Ductless System
- Inverter Boards
- ECM Motors
- Control Boards
- Transformers
- Relays
- Sensors
MARS NO. | DESCRIPTION | ENCLOSURE | INCLUDES SURGE PROTECTOR |
---|---|---|---|
83915 | 60 Amp Non-Fused w/Surge Module | NEMA 3R, Rainproof | MARS NO. |
83910
83916| 30 Amp Fused w/Surge Module| NEMA 3R, Rainproof| MARS NO. 83910
83917| 60 Amp Fused w/Surge Module| NEMA 3R, Rainproof| MARS NO. 83910
MARS NO.| | DESCRIPTION|
83910| Replacement Surge Module For 83915, 83916 and 83917
Line Set Covers
Attractive and durable line set cover for protecting and concealing refrigerant tubing/insulation, control wire, and drains. Ideal for ductless and all other applications requiring exposed refrigeration line sets. All connectors have front and back plates which fasten together with two screws.
- Vulnerable components are protected from solar/environmental exposure
- Aesthetically conceals mechanicals in architectural-grade, paintable plastic duct
- Two (2) separate cover sizes to choose from – 3” and 4” duct widths – provide ample room for multiple line sets and larger tonnage equipment
- Easy, flexible configuration for new or retrofit applications
93728 3” Line Set Cover Kit:
4 x 93729 3.25’ Straight Duct
1 x 93731 90° Wall Corner
1 x 93732 90° Corner
1 x 93733 Plane Corner
3 x 93734 Duct Connector
1 x 93735 End Cap
1 x 93736 Flexible Duct
Case Qty: 1
93737 4” Line Set Cover Kit:
4 x 93738 3.25’ Straight Duct
1 x 93740 90° Wall Corner
1 x 93741 90° Corner
1 x 93742 Plane Corner
3 x 93743 Duct Connector
1 x 93744 Flexible Duct
Case Qty: 1
Product & Accessories
-
93729 3.25’ Straight Duct, 3” Case Qty: 8
-
93730 Wall Cover, 3” Case Qty: 5
-
93731 90° Wall Corner, 3” Case Qty: 10
-
93732 90° Corner, 3” Case Qty: 5
-
93733 Plane Corner, 3” Case Qty: 10
-
93734 Duct Connector, 3” Case Qty: 10
-
93735 End Cap, 3” Case Qty: 5
-
93736 Flexible Duct, 3” Case Qty: 10
-
93738 3.25’ Straight Duct, 4” Case Qty: 6
-
93739 Wall Cover, 4” Case Qty: 5
-
93740 90° Wall Corner, 4” Case Qty: 5
-
93741 90° Corner, 4” Case Qty: 5
-
93742 Plane Corner, 4” Case Qty: 5
-
93743 Duct Connector, 4” Case Qty: 5
-
93744 Flexible Duct, 4” Case Qty: 5
Customer Support
WARNING
Cancer and Reproductive Harm
WWW.P65Warnings.ca.gov
Toll Free: 800-445-4155 • Fax:
631-348-7160 •
www.marsdelivers.com
©2024 MOTORS & ARMATURES, Inc.
MARS is a registered trademark of Motors & Armatures, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>