BONTEMPI 41 3020 Wireless Microphone Owner’s Manual

June 10, 2024
BONTEMPI

BONTEMPI Logo 41 3020 Wireless Microphone
Owner’s Manual

41 3020 Wireless Microphone

ICOM S.p.A. reserves all rights to modify specifications of this product without notice. Read and keep this manual for future reference.
ATTENTION: Do not use alcohol, solvents or similar chemical substances for cleaning. Use a soft cloth dampened in a bland solution of water and neutral detergent.

| BONTEMPI 41 3020 Wireless Microphone - Bon1
---|---

2.4GHz <100mW
Hereby, i Com S.p.A. declares that the radio equipment type Wireless “microphone speaker 41_3020” is in compliance with  Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.icomtoys.it/CE-Declaration/DoC_413020.pdf

POWER SUPPLY

Use a screwdriver to open the battery compartment. Insert 3 x 1.5 V batteries R6/AA(not supplied), ensuring correct polarity (+/–). Re-fit battery cover. Replace batteries when the quality of sound becomes bad. Use alkaline batteries to obtain a longer duration.
ATTENTION – BATTERY CARE:
Non-rechargeable batteries are NOT to be recharged.

  • Rechargeable batteries must be removed from the product before being charged.
  • Rechargeable batteries are only to be charged under adult supervision.
  • Different types of batteries or new and old batteries are not to be mixed.
  • Use only batteries of the same or equivalent type.
  • Batteries are to be inserted with correct polarity.
  • Remove exhausted batteries to prevent leakage.
  • Do not short circuit supply terminals.
  • Remove batteries during long periods of non-use.

WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below, please refer to Council Administration office regarding specialised waste collection centres.

  1. DISPOSAL OF BATTERIES: Protect the environment by disposing of batteries in the special containers provided for this use.

  2. PACKAGING DISPOSAL: Take the paper, cardboard and corrugated board to the appropriate waste collection centers. Plastic material must be placed in the relevant collection containers.
    The symbols indicating the various types of plastic are:
    Key for the different types of plastic materials:
    PET= Polyethylene terephthalate
    • PE= Polyethylene, code 02 for PE-HD, 04 for PE-LD
    • PVC =Polyvinyl chloride
    • PP= Polypropylene
    • PS= Polystyrene, Polystyrene foam
    • O= Other polymers (ABS, Laminates, etc.)

  3. DISPOSING OF ELECTRICAL APPLIANCES: The wheelie bin symbol with a cross indicates that the product must not be disposed of in the domestic waste at the end of its useful life. Instead, it should be taken to your nearest designated collection point or recycling facility. Alternatively, check with your retailer and return the product when buying a replacement, on a one-to-one basis or as free of charge in case the size is smaller than 25 cm. Appropriate disposal promotes the recycling of parts and materials, as well as helping to protect the environment and human health. Under current legislation, strict penalties are enforced against those disposing of products illegally. For more information about the collection of special waste, contact your Local Authority.

SWITCHING ON/OFF
To switch on, press the key a. The LED g flashes. To switch off, repeat the same operation.

FUNCTIONS

All the features on the microphone can be turned on/off by turning each ring to the left and then to the right, respectively.
Ring 3: 2 songs / 2 rhythms
Ring 4 : 5 Volume levels / Flashing light effects activation key
Ring 5 : 8 melodies / 2 rhythms
Ring 6: 3 Sound effects

WIRELESS CONNECTION

An external audio source can be connected (smartphone, tablet, PC, etc. – not supplied) as follows:

  1. Hold down the button b for a few seconds until you hear an audible sound. The LED h flashes.
  2. Turn on Bluetooth on your smartphone, tablet, etc. and select “Bontempi 30” to pair it with th microphone: an audible sound indicates that it is connected. The LED g flashes.
  3. Search through the playlist on your smartphone or computer for a song and play it. You can listen to the song through the speaker on your microphone.

BONTEMPI 41 3020 Wireless Microphone - Bon4

TROUBLE SHOOTING GUIDE

Problem Solution
The instrument doesn’t work or distorted sound Batteries low – fit new

batteries. Batteries incorrectly fitted – check.
The Wireless connection breaks down| Decrease the distance between mobile phone and microphone. Remove obstacles.

ATTENTION: in the case of malfunctioning remove and re-insert the batteries

BONTEMPI Logo ICOM S.p.A.
Sede Legale: Via Caduti del Lavoro, 4 – 60131 Ancona – Italy
Sede Administrative: Viale Don Bosco, 35 – 62018 Potenza Picena (MC) – Italy
www.bontempi.com
e-mail: info@bontempi.com

https://gqrc.it/scan/d99fb401-f39f-46e3-a1db-afb667a7eb0b

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals