Crock Pot 8Qt Express Crock XL Multi- Cooker Owner’s Manual

Crock Pot 8Qt Express Crock XL Multi- Cooker Owner's Manual

www.crockpot.com

SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY

NORTH AMERICAN MODELS WITH POLARIZED PLUGS:

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. If the plug fits loosely into the AC outlet or if the AC outlet feels warm do not use that outlet.

POWER CORD INSTRUCTIONS:
A short power-supply cord is used to reduce the risk resulting from it being grabbed by children, becoming entangled in, or tripping over a longer cord.

NOTICES:

1. Some countertop and table surfaces are not designed to withstand the prolonged heat generated by certain appliances. Do not set the heated unit on a finished wood table. We recommend placing a hot pad or trivet under your slow cooker to prevent possible damage to the surface.
2. During initial use of this appliance, some slight smoke and/or odor may be detected. This is normal with many heating appliances and will not recur after a few uses.
3. Please use caution when placing your stoneware on a ceramic or smooth glass cook top stove, countertop, table or other surface. Due to the nature of the stoneware, its rough bottom may scratch some surfaces if caution is not used. Always place heat resistant protective padding under the stoneware before setting on a table, countertop or other surface.

CROCK-POT ® EXPRESS CROCK XL COMPONENTS

CONTROL PANEL

UNDERSIDE OF LID

HOW TO USE YOUR EXPRESS CROCK MULTI-COOKER

Getting started :
Remove all packaging, paper, and cardboard (including any located between the Cooking Pot and Heating Base). Read and save the literature and be sure to read the service and warranty information.
Visit the Crock-Pot ® website at  www.crockpot.com  for additional information, hints, tips and recipes or call 1-800-323-9519.

Assembly :

• Place Cooking Pot into the Heating Base
• Place Lid upon Multi-Cooker and align with . To lock, twist counterclockwise, aligning with . To unlock, twist Lid clockwise and align with .

A NOTE ABOUT PRESSURE COOKING

Pressure cookers generate steam in order to build pressure. Liquid is needed to create steam. So in order for your Express Crock to build enough pressure to cook your meal, there needs to be enough liquid in the pot to boil and generate steam. One cup – or 8 oz – of liquid (it can be water, chicken broth, etc.) is usually enough liquid to successfully build pressure. If your recipe is too thick or doesn’t have enough liquid in it, then you will receive an E6 Notification Code during the cooking cycle.

GETTING TO KNOW YOUR EXPRESS CROCK

1. Remove the Lid by turning clockwise to unlock, aligning with . Remove the Sealing Gasket from the Lid and wash the gasket and the Lid in warm soapy water. Dry the Sealing Gasket and Lid thoroughly before reattaching the Sealing Gasket to the Lid. Ensure the Sealing Gasket is smoothly and securely in place in the gasket holder. If the Sealing Gasket is not in the correct position the Lid will not be able to form a seal and will not be able to gain pressure.
2. Remove the Cooking Pot and the Condensation Collector and wash in warm, soapy water. Dry thoroughly before replacing back in the Multi-Cooker.

The Express Crock Multi-Cooker has been designed with safety in mind and has various safety measures.

1. Pressure will not build if the Lid is not shut correctly and has not sealed.

2. Ensure Lid is in the completely locked position and the is aligned with .

3. Pressure will not build if the Steam Release Valve has not been switched to the Seal position.

4. Over filling may cause a risk of clogging the valves and developing excess pressure.

5. The gasket and the valves can be removed for cleaning. (See pages 36-38).

6. Once the pressure increases, the Lid should not be opened. Safety sensors ensure the pressure remains within the set range. Never force the Lid open.

7. The Steam Release Valve has an extended finger tab, designed to keep the hand away from the top of the valve. Always use a kitchen utensil when operating this tab. Steam Release Valve is designed to be loose-fitting for proper operation. See RELEASING PRESSURE Instructions on pages 20-21.

8. The pressure cooking functions require liquid to work. If the inside of the Cooking Pot does not have enough liquid, a notification will appear on the Display Screen. See NOTIFICATION CODES chart on pages 41-42.

9. At the end of cooking, the Lid should not be unlocked until all the pressure is released, and the Bobber Valve has dropped completely. This can be done using the Natural Pressure Release Method or Quick Pressure Release Method,
   explained on pages 20-21.

10. The Time Selection Buttons (+ and -) are used to set the cooking time. To advance slowly, simply press the + or – button and release. To advance quickly, press and hold the + or – button. If you have passed the desired time, simply press the opposite arrow button to return to the desired time.
    NOTE : The timer can be selected for all programs and can be changed at any time during cooking by pressing START/STOP and selecting a new function.

11. The TEMP/PRESSURE button is used to select desired cooking temperature or pressure (HIGH or LOW). The Display Screen will illuminate TEMP or PRESSURE, depending on which setting is being adjusted.

12. The temperature may only be adjusted on the SLOW COOK, YOGURT, BOIL, SIMMER, SAUTÉ, and BROWN/ SEAR functions (see the Cooking Guide on page 25 for available adjustments).

13. Each pre-set pressure cooking function automatically selects the optimum pressure for that selection, but it can be manually selected with this button (see the Cooking Guide on page 25 for available adjustments).

14. The START/STOP button starts and stops a cooking function. It must be pressed to change from one cooking function to another after cooking has begun.

15. The Display Screen shows how much longer the food needs to cook from the selected time in hours and minutes once the Multi-Cooker is preheated. While the Multi-Cooker is preheating, the display screen will show, “HEAT”.

GETTING STARTED

(NOTE: The Multi-Cooker beeps as each button is pressed.)

1. Add desired ingredients to Cooking Pot. Place Lid on top of Multi-Cooker and align with . To lock, twist counterclockwise, aligning with .

2. Turn the Steam Release Valve to the “Seal” position if pressure cooking. The Steam Release Valve should be open when using the SLOW COOK and YOGURT functions. Do not place the Lid on when using BROWN/ SEAR, SAUTÉ, SIMMER, or BOIL.

3. Plug provided Power Cord into the Power Cord Port of the Multi-Cooker.

4. Plug other end of the Power Cord into a wall power outlet.

5. Select the cooking function you would like to use.

6. The START/STOP button and the time on the screen will flash.

7. Select the desired cook time by using the + and – buttons. Select the desired temperature or pressure using the TEMP/PRESSURE button, if applicable (see the Cooking Guide chart on page 25 for time and temperature recommendations).

8. Press the START/STOP button. For pressure cooking functions, the word “HEAT” will appear on the Display
   Screen during preheating time. Once the Multi-Cooker is preheated, the selected cooking time will appear on
   Display Screen.
   Note : For pressure cooking functions, 13-15 minutes is the approximate average preheat time. If food content is larger or very cold, preheat time may take slightly longer.

9. This Multi-Cooker allows you to delay the start of your cooking so that cooking finishes when you need it. See page 14 for instructions on the DELAY TIMER function.

10. After the set cooking time has elapsed, the Multi-Cooker will beep again and will automatically switch to the KEEP WARM setting. The Display Screen will then change from the cook time to a new timer that will count up to 4:00 (4 hours) or until you press the START/STOP button. After 4 hours in the KEEP WARM setting, the Multi-Cooker will turn off.

11. To end a cooking function at any time, press the START/STOP button.

12. When finished, unplug the Multi-Cooker and wait for it to cool completely before attempting to clean.
    CAUTION : The Cooking Pot and Heating Base will get very hot while using this Multi-Cooker. Do not touch hot surfaces. Always use pot holders or oven- mitts when using this Multi-Cooker. Always lift the Lid by tilting away from you to avoid the steam.

USING THE MANUAL SETTING WHILE PRESSURE COOKING

If you have a pressure recipe that requires a manual setting — or if you simply want to pressure cook using your own pressure setting and cook time — then select MANUAL PRESSURE and adjust the pressure and cook time as desired. See the Cooking Guide on page 25 to find the possible time and pressure adjustments.

HOW TO USE THE TIME DELAY

This Multi-Cooker allows you to delay the start of your cooking so that cooking finishes when you need it.
Note : The DELAY TIMER function is not available on the BROWN/SEAR, SAUTÉ , KEEP WARM, BOIL, SIMMER or YOGURT settings.
Note : Do not use the DELAY TIMER function when the recipe has perishable ingredients such as meat, fish, eggs, or dairy, as these may spoil.

1. Adjust the Multi-Cooker settings using the instructions on pages 17-33.
2. After setting the cooking time, press the DELAY TIMER button. The DELAY TIMER and START/STOP buttons will flash, and “0:30” will flash on the Display Screen, to indicate the Multi-Cooker is being programmed on the delay setting.
3. Press the + and – buttons until you reach the number of hours and minutes you want the cooking process to be delayed (i.e., set the amount of time you wish to delay the cooking cycle). The maximum delay is 4 hours (4:00).
4. Press START/STOP button to begin the delay feature. The timer and DELAY TIMER button will stop flashing, while the START/STOP button will continue flashing. This will indicate that the Multi-Cooker has been set on the DELAY TIMER setting. The Display Screen will countdown the delay time until 0:00 is reached. When 0:00 is reached, the DELAY TIMER light will turn off and the START/STOP light will stop flashing to show that time delay has finished. The word “HEAT” will appear on the display screen until the Multi-Cooker is fully pressurized. When the selected pressure has been reached, the timer will start counting down.

Example :
It’s 4pm and you want to have a soup cooked and ready in 2 hours’ time for dinner at 6pm. You want to set the machine
now so you are free to do other things. The pre-set function (if unchanged) will cook for 30 minutes at HIGH pressure. Time to gain pressure varies according to humidity and water temperature, but let’s assume it takes 15 minutes to gain pressure. Therefore total time is 45 minutes. To have the soup ready by 6pm, you will need to delay the start of your cooking by approximately 1 hour and 15 minutes.

1. Press SOUP/BROTH
2. The Display Screen will flash “0:30”
3. Press the DELAY TIMER button and set for “1:15”
4. Press START/STOP

COOKING POT MARKINGS

Inside the removable Cooking Pot are markings to guide the fill level of the Cooking Pot. The word MAX indicates the maximum fill line.
The 1/3, 1/2, and 2/3 markings are handy guides to use in your recipes.

CAUTION : Never load the Cooking Pot above the maximum ingredient level line marked MAX on the inside of the Cooking Pot.
Foods that expand during cooking (e.g., rice, beans, dried vegetables, potatoes, carrots, etc.) should never go above the 1/2 mark.

Note : The Multi-Cooker cannot pressure cook without liquid. Ensure a minimum of 8oz of liquid is used inside the removable Cooking Pot.

PRESSURE COOKING

Pressure cooking is an ideal way to create quick, flavorful meals. Pressure cooking is a method of cooking food in liquid (water, stock, wine, etc.) in a sealed Cooking Pot. The sealed Multi-Cooker retains steam and builds pressure, raising the temperature of the liquid inside the pot above boiling point. The increased temperature of the liquid and the steam results in reduced cooking times.

HIGH Pressure Setting is 6.5 – 10 PSI (45 – 70 kPa). It is suitable for a wide range of foods.

LOW Pressure Setting is 3.3 – 6.5 PSI (23 – 45 kPa). It is more suited to delicate foods like chicken fillet, fish and some vegetables.

KEEP WARM Setting : When cooking time is completed, the Multi-Cooker automatically switches to the KEEP WARM
setting to prevent overcooking and to keep your cooked food warm until serving – perfect for busy families, those on the run and those who need flexible meal times. This setting is not hot enough to cook and should only be used to keep warm, cooked food for serving.

Ideal Meals to Pressure Cook : Soups, stocks, casseroles, sauces (e.g., pasta sauces), meat, rice, firm vegetables (beetroot, potatoes) and desserts (e.g., pudding).

Capacity : Never fill the Cooking Pot above the MAX line. Foods that expand during cooking should never go above the 1/2 mark. The Multi-Cooker cannot pressure cook without liquid. Ensure a minimum of 8oz of liquid is used inside the removable Cooking Pot.

CAUTION : Never use the Quick Pressure Release Method when cooking foods high in liquid content, such as casseroles, stocks and soups. See RELEASING PRESSURE instructions on pages 20-21.

USING THE PRESSURE COOKING FUNCTIONS

Place the Multi-Cooker on a flat, level surface.
Place Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the Display Screen will illuminate with four dashes (- – – -).

1. Place your food and liquid inside the removable Cooking Pot.

2. Place the Lid onto the Multi-Cooker and align with . To lock, rotate counterclockwise to the LOCKED position.

3. Using the finger tab, rotate the Steam Release Valve to the “Seal” position.

4. Select the desired cooking function

5. Adjust the cooking time and pressure if necessary.
   Note : See the Cooking Guide on page 25 to find the possible time and pressure adjustments

6. Once you have made the desired adjustments, if any, press START/STOP.

7. The Multi-Cooker needs to gain pressure before pressure cooking can begin. When the Multi-Cooker is gaining pressure, “HEAT” will appear on the Display Screen and the time will not count down. The amount of time the Multi-Cooker takes to gain pressure varies according to humidity and water temperature, but average pressurization time is
   13-15 minutes. When pressure has been reached, “HEAT” will disappear on the Display Screen, and the time will
   begin to count down.

8. After the set cooking time has elapsed, the Multi-Cooker will beep and will automatically switch to the KEEP WARM setting. The Display Screen will therefore change from the cook time to a new timer that will count up to 4:00 (4 hours) or until you press the START/STOP button. After 4 hours in the KEEP WARM setting, the Multi-Cooker will go into stand-by mode, and the Display Screen will illuminate with four dashes (—-).

TIPS :

1. The pressure cooking settings are in the Cooking Guide table on page 25.
2. If the lid is not shut correctly or if the Steam Release Valve is not in the “Seal” position, the Multi-Cooker cannot gain pressure and a NOTIFICATION message will appear in the Display Screen. Ensure that the Sealing Gasket is placed evenly in the lid. See the NOTIFICATION CODES chart on pages 41-42.
3. It is common for some steam to release through the Bobber Valve during the cooking cycle. This is part of normal operation of the unit.

Note : The Multi-Cooker cannot pressure cook without liquid. Ensure a minimum of 8oz of liquid is used inside the removable Cooking Pot.

CAUTION : During cooking, steam will build up in the Multi- Cooker, so when lifting the Lid use a kitchen glove or mitt to protect your hand.

BOBBER VALVE

When Bobber Valve is in the “UP” position, DO NOT attempt to open the Lid, as the Multi-Cooker is still under pressure. When the Bobber Valve is in the “DOWN” position, the pressure has released. (See figure 4)

RELEASING PRESSURE AT THE END OF COOKING

1. Natural Pressure Release Method : After cooking cycle is complete, let Multi-Cooker naturally release pressure through the Bobber Valve. Unit will gradually cool down on its own. Wait at least 10 minutes after cooking has completed, and then, using a kitchen utensil, flick the tab on the Steam Release Valve to the “Release” position (see Figure 5). Do not place any part of your hand or body over the steam outlet on top of the valve, as steam is very hot and can scald skin. The pressure has been released when steam is no longer escaping from the valve, the Bobber Valve has dropped completely, and the Lid opens freely with minimal force. Never force the Lid open.
2. Quick Pressure Release Method : Using a kitchen utensil, flick the tab on the Steam Release Valve to the “Release” setting (see Figure 5). Steam will release rapidly from the Steam Release Valve. Do not place any part of your hand or body over the steam outlet on the top of the valve, as steam is very hot and can scald skin.

CAUTION : Never use this method when cooking foods high in liquid content such as casseroles, beans, stews, stocks and soups. Never use this method when cooking rice, as rice tends to be very delicate. The pressure has been released when steam is no longer escaping from the valve, the Bobber Valve has dropped and the Lid opens freely with minimal force. This can take up to 10-20 minutes. Never force the Lid open.

CAUTION :

1. Do not for the Lid to open. If the Bobber Valve has dropped completely and the Lid does not open easily, this means that the Multi-Cooker is still under pressure.
2. During cooking, steam will build up in the Multi-Cooker, so when lifting the Lid use a kitchen glove or mitt to protect your hand.
3. To avoid suction when removing or securing the Lid, turn the Steam Release Valve to the “Release” (open) position.

USING THE LID AND STEAM RELEASE VALVE

USING THE GLASS LID

The optional Glass Lid accessory can be used instead of the standard Express Crock Lid on all non-pressure cooking functions such as SLOW COOK, BROWN/SEAR, SAUTÉ, BOIL, SIMMER, YOGURT, and KEEP WARM.

SLOW COOKING

LOW Setting : This is suitable for simmering and slow cooking. Recommended cooking time in LOW is for 8 or more hours.

HIGH Setting : This is for faster cooking. Recommended cooking times in HIGH are from 4 to 6 hours.

KEEP WARM Setting : When cooking time is completed, the Multi-Cooker automatically switches to the KEEP WARM setting to prevent overcooking and to keep your cooked food warm until serving – perfect for busy families, those on the run and those who need flexible meal times. This setting is not hot enough to cook and should only be used to keep hot, cooked food warm for serving.

Note : When slow cooking, the ideal fill level for your ingredients is between the 1/2 and 2/3 marks. Never fill the Cooking Pot above the MAX line.

USING THE SLOW COOK FUNCTION

The SLOW COOK function does not use pressure in the cooking process, but some pressure can build inside the unit during cooking. When using this function, ensure the Steam Release Valve is in the “Release” position. This function will cook similarly to standard slow cookers, using lower temperatures and longer cooking times to achieve tender, flavorful meals. Place the Multi- Cooker on a flat, level surface. Place Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the Display Screen will illuminate with four dashes (- – – -).

1. Place your food and liquid inside the removable Cooking Pot.

2. Place the Lid onto the Multi-Cooker and align with . To lock, rotate counterclockwise to the LOCKED position.

3. Using the finger tab, rotate the Steam Release Valve to the “Release” position.
   Note : Although this setting will not use pressure in the cooking process, some pressure can build inside the unit during cooking. This is why it’s important to keep the Steam Release Valve in the “Release” position.

4. Press the SLOW COOK button and adjust the time and temperature as needed.
   Note: See the Cooking Guide on page 25 to find the possible time and temperature adjustments.

5. Press START/STOP. The time will begin to count down.

6. After the set cooking time has elapsed, the Multi-Cooker will beep and will automatically switch to the KEEP WARM setting. The Display Screen will therefore change from the cook time to a new timer that will count up to 4:00 (4 hours) or until you press the START/STOP button. After 4 hours in the KEEP WARM setting, the Multi-Cooker will turn off.

Note : As the SLOW COOK function does not cook under pressure, you can remove the lid during cooking to check your slow cooking progress. Only lift the Lid if necessary. Since slow cooking uses lower temperatures to cook, the Multi-Cooker will not recover lost heat very quickly, which may impact cooking times.

TIP : The SLOW COOK settings are in the Cooking Guide on page 25.

CAUTION : During slow cooking, steam may build up in the Multi-Cooker, so when lifting the Lid use a kitchen glove or mitt to protect your hand.

COOKING GUIDE

STEAMING

The STEAM function is perfect for gently steaming fish and vegetables. It is pre-programmed to use the HIGH pressure cooking setting. When steaming, use the Steaming Rack. Capacity: When the Multi-Cooker is used with the STEAM function, the maximum capacity of liquid should be just under the rack wires, so that the liquid is not touching the food.

Note : The unit cannot pressure cook without liquid. Ensure a minimum of 8oz of liquid is used inside the removable Cooking Pot.

USING THE STEAM FUNCTION

Place the Multi-Cooker on a flat, level surface.
Place Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the Display Screen will illuminate with four dashes (- – – -).

1. Add 8oz of water to the bottom of the removable Cooking Pot and insert the cooking rack. Ensure water is just under the wires of the rack so that food is not touching water.

2. Place your food on the cooking rack.

3. Place the Lid on and lock by rotating counterclockwise to the LOCKED position.

4. Using the finger tab, flick the Steam Release Valve to the “Seal” position.

5. Press the STEAM button and adjust the time and pressure as needed.
   Note : See the Cooking Guide on page 25 to find the possible time and pressure adjustments.

6. Once you have made the desired adjustments, if any, press START/STOP.

7. The Multi-Cooker needs to gain pressure before pressure cooking can begin. When the Multi-Cooker is gaining pressure, “HEAT” will appear on the Display Screen and the time will not count down. When pressure has been reached, “HEAT” will disappear on the Display Screen, and the time will begin to count down.

8. After the set cooking time has elapsed, the Multi-Cooker will beep and will automatically switch to the KEEP WARM setting. The Display Screen will therefore change from the cook time to a new timer that will count up to 4:00 (4 hours) or until you press the START/STOP button. After 4 hours in the KEEP WARM setting, the Multi-Cooker will turn off.

TIP : See the Steaming Chart on page 28.

CAUTION : During cooking, steam will build up in the Multi-Cooker, so when lifting the Lid use a kitchen glove or mitt to protect your hand.

STEAMING CHART

SEARING AND SAUTÉING

The settings BROWN/SEAR and SAUTÉ do not cook under pressure. They work similarly to standard cooking, requiring dry heat, and therefore does not need the Lid. Place the Multi-Cooker on a flat, level surface. Do not use the Lid with this function.

BROWN/SEAR

The BROWN/SEAR function is designed to brown (sear) meats for casseroles and soups. Browning meat prior to pressure cooking and slow cooking not only gives your food great color, but it also seals in the juices and flavors and keeps the meat tender.

SAUTÉ

The SAUTÉ function is designed to sauté onions and mirepoix (mixture of chopped onion, carrot, and celery), among many other foods, often used in pressure cooker and slow cooker recipes. Sautéing onions allows caramelization which contributes to the flavor and color in the end dish.

USING THE BROWN/SEAR AND SAUTÉ FUNCTIONS

Place Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the Display Screen will illuminate with four dashes (- – – -).

1. Select the BROWN/SEAR or SAUTÉ function and adjust the time and temperature if necessary, using the + and – buttons.
2. Press START/STOP.
3. When the Multi-Cooker is pre-heating, “HEAT” will appear on the Display Screen. When the temperature has been reached, the timer will start counting down. Using plastic tongs, carefully add your food to the hot pot.

Capacity: When the Multi-Cooker is used to brown or sauté it may be best to cook in batches to ensure the food is evenly cooked.

RICE COOKING

When cooking rice, use the RICE/GRAINS function. This is suitable for all types of rice, including white and/or brown
rice. The RICE/GRAINS function cooks under pressure for faster cooking.
Capacity: Since rice expands during cooking, do not fill Cooking Pot above the 1/2 mark when using the RICE/GRAINS function.

USING THE RICE/GRAINS FUNCTION

Place the Multi-Cooker on a flat, level surface. Place the Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the Display Screen will illuminate with four dashes (- – – -).

1. Measure the desired quantity of rice.
   Note : 1 cup uncooked white rice = 2 cups of cooked white rice (approximately). 1 cup uncooked brown rice = 2 cups cooked brown rice (approximately).

2. Place the measured rice in a strainer and wash rice thoroughly under cold water. Wash until the water runs clear. This removes excess starch which helps to achieve fluffier rice, and prevents rice grains sticking to the Cooking Pot. Rinsing the rice reduces the build-up of starchy water and bubbles that sometimes form around the Valve Cover and Lid, which can cause spitting from the Steam Release Valve.

3. Ensure the Cooking Pot is clean and dry before placing it inside the Heating Base.

4. Place the washed rice in the Cooking Pot. Add the quantity of water needed for your recipe (Standard ratio — 1 cup of uncooked rice : 1.5 cups of water). Ensure that a minimum of 8oz of liquid is placed inside the removable Cooking Pot.

5. Place the Lid on and lock by rotating counterclockwise to the LOCKED position.

6. Using the finger tab, flick the Steam Release Valve to the “Seal” position.

7. Press the RICE/GRAINS button and adjust the time and pressure as needed.
   Note : See the Cooking Guide on page 25 to find the possible time and pressure adjustments.

8. Once you have made the desired adjustments, if any, press START/STOP.

9. The Multi-Cooker needs to gain pressure before pressure cooking can begin. When the Multi-Cooker is gaining pressure, “HEAT” will appear on the Display Screen and the time will not count down. When pressure has been reached, “HEAT” will disappear on the Display Screen, and the time will begin to count down.

10. After the set cooking time has elapsed, the Multi-Cooker will beep and will automatically switch to the KEEP WARM setting. The Display Screen will therefore change from the cook time to a new timer that will count up to 4:00 (4 hours) or until you press the START/STOP button. After 4 hours in the KEEP WARM setting, the Multi-Cooker will turn off.

TIPS :

1. Do not keep rice in the pot for extended periods of time on the KEEP WARM setting, as the rice will become dry and the quality will deteriorate. Use the supplied plastic spoon to stir and serve the rice. Do not use metal utensils, as these will scratch the non-stick coating.
2. As rice grains can be delicate, at the end of cooking wait until the pressure releases naturally. Do not use the Quick Pressure Release Method (see page 20 for instructions on the Natural Pressure Release Method).
3. Standard ratio for cooking rice — 1 cup of uncooked rice : 1.5 cups of water

CAUTION : During cooking, steam will build up in the Multi-Cooker, so when lifting the Lid use a kitchen glove or mitt to protect your hand.

BOILING AND SIMMERING

The settings BOIL and SIMMER do not cook under pressure. They work similarly to standard cooking, requiring dry heat, and therefore do not need the Lid.

BOIL

The BOIL function is perfect for preparing meals like pasta and poached eggs. Note: Do not use the Lid with this function.

LOW setting : This is suitable for boiling low volumes of food, such as from the bottom of the Cooking Pot to the 1/3 mark.

HIGH setting : This is suitable for boiling higher volumes of food, such as between the 1/3 to 1/2 marks. Do not fill the Cooking Pot above the 1/2 mark when using the BOIL function on HIGH temperature.

SIMMER

Thicken sauces and make gravies at the end of cooking using the SIMMER function.

LOW setting: This is suitable for simmering low volumes of food, such as between the bottom of the Cooking Pot and the 1/3 mark.

HIGH setting: This is suitable for simmering higher volumes of food, such as between the 1/3 and 1/2 marks in the Cooking Pot.

To thicken a dish as the end of cooking, use the SIMMER function and stir a small amount of corn flour with water. Allow to simmer, stirring until thickened.

USING THE BOIL AND SIMMER FUNCTIONS

Place the Multi-Cooker on a flat, level surface. Do not use the Lid with the BOIL function.
Place Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the Display Screen will illuminate with four dashes (- – – -).

1. Place liquid inside the Cooking Pot prior to starting the BOIL and SIMMER functions.
2. Select either the BOIL or SIMMER function and adjust the temperature if necessary, using the + and – buttons.
3. Press START/STOP.
4. When the Multi-Cooker is pre-heating, “HEAT” will appear on the Display Screen. When the temperature has been reached, the timer will start counting down.

CAUTION : Never attempt to boil or simmer thick sauces. The BOIL and SIMMER functions are intended for liquids only. When boiling thick sauces, heat bubbles can form, become trapped and burst, and can result in serious burns.

TO CHANGE A SETTING

It’s easy to switch functions during cooking.
Press the START/STOP button and then select the new desired cooking function. A new timer will flash on the Display Screen, and the selected function will also flash. Select the desired time, pressure, and/or temperature. Press the START/STOP button and the new function will begin preheating.

To Change the Cooking Time:
You can change the cooking time before cooking begins by pressing the + and – buttons before pressing START/STOP. Press and release to change slowly. Press and hold to change time quickly. If you pass the desired temperature or time, press the opposite button.

To Change the Temperature and Pressure :
You can change the temperature or pressure on certain pre-set functions before cooking begins by pressing the TEMP/PRESSURE button before pressing START/STOP. The Display Screen will illuminate TEMP or PRESSURE, depending on which setting is being adjusted. The temperature may only be adjusted on the SLOW COOK, YOGURT, BOIL, SIMMER, SAUTÉ and BROWN/SEAR functions (see the Cooking Guide on page 25 for available adjustments).

CARE AND CLEANING

Cleaning should only be carried out when the the Express Crock is cool and unplugged. Allow the Multi-Cooker to completely cool before cleaning. Do not use the removable Cooking Pot on the stovetop, inside a microwave oven or inside an oven. Use the pot only inside the Express Crock Heating Base. Wash the Sealing Gasket and Lid by hand in warm, soapy water. Dry all parts thoroughly.

Cooking Pot :
When removing the Cooking Pot from the Heating Base, always use two hands and lift directly upward. Failure to do so may result in scratching the outside of the Cooking Pot (see figure 6).

If food sticks or burns to the surface of the Cooking Pot, then fill it with hot soapy water and let it soak before cleaning. Use a rubber or nylon spatula to remove stubborn residue. If scouring is necessary, use a non-abrasive cleaner and a nylon scouring pad or brush.

Although the Cooking Pot is dishwasher safe, we recommend hand-washing to preserve the non-stick coating.

If white spots form on surface of Cooking Pot, then soak it in a solution of vinegar or lemon juice and warm water for 30 minutes. Rinse and dry.

Note : Never use metal utensils or cleaning devices on the Cooking Pot, as this may result in scratching and damaging the non-stick coating.

Exterior
Wipe the exterior of the Heating Base with a damp cloth and polish dry. DO NOT use harsh abrasives, scourers or chemicals, as these will damage the surfaces. To prevent damage to the Multi-Cooker do not use alkaline cleaning agents when cleaning. Only use a soft cloth and mild detergent. Never immerse the heating base in water or any other liquid.

Condensation Collector
Empty any collected water from the Condensation Collector after each use. Wash in warm, soapy water.

Lid and Sealing Gasket
Always examine the gasket before each use. The silicon Sealing Gasket on the inside of your Multi-Cooker Lid may deteriorate over time. Remove Sealing Gasket for cleaning as needed. Hand clean using warm, soapy water, dry thoroughly, and replace Sealing Gasket in Lid before use. Leave the Lid upturned for storage, as this will also extend the life of the gasket. Sealing Gasket may need to be replaced every 1 – 2 years depending on regular use. Contact Crock-Pot ® customer service or visit www.crockpot.com to order replacement parts.

Steam Release Valve
Ensure the Steam Release Valve is clear from debris before you begin using the Multi-Cooker. Remove the valve and gently clean. Ensure it is completely dry before replacing.

Steam Release Valve Cover
The Steam Release Valve Cover is on the underside of the Lid. Ensure it is clear from debris before you begin using the Multi-Cooker. To clean, carefully pull the cover off and clean using warm, soapy water. Press the cover back into its place after cleaning is complete.

UNDERSIDE OF LID

Bobber Valve
Gently press the valve up and down 2-3 times and ensure it is clear from debris before you begin using the Multi-Cooker.

Lid Lock Pin
Gently press the pin and ensure it is clear from debris before you begin using the Multi-Cooker.

Note:

1. Condensation may collect inside the Heating Base under the removable Cooking Pot. This is normal. Allow to cool, and then dry using kitchen cloth.
2. Always make sure that each component (pot, valves, gasket, etc.) is completely dry before you put back into the Multi-Cooker.

TROUBLESHOOTING

HINTS AND TIPS

Hints and Tips to get the best use of your Crock-Pot ® Express Crock Multi- Cooker: Go to the Crock-Pot ® website at www.crockpot.com for additional recipes, hints, tips and much more.

With your Express Crock you can create a large variety of delicious meals, snacks and desserts. Various foods take different times to cook perfectly, so sometimes it may take some trial and error to get the cooking times right for you.

1. Please refer to your Crock-Pot ® Express Crock owner’s manual when using your Multi-Cooker.
2. Never fill the Cooking Pot past the MAX line.
3. Do not leave Multi-Cooker plugged in when not in use.
4. Make sure Multi-Cooker is kept away from cabinets and walls when in use.
5. The Cooking Pot is designed to be used only in this Multi-Cooker. Do not use on stovetop, in microwave, or in oven.
6. The provided Steaming Rack is designed to be used in this Multi-Cooker. It should not damage the surface of the Cooking Pot. Do not stir ingredients while Steaming Rack is in Cooking Pot.
7. When removing the Lid, use a pot holder to grasp the Lid Handle and lift away from your body to allow steam to escape.
8. Always place a trivet or pot holder under the Cooking Pot if it is removed from the Heating Base.

HINTS AND TIPS FOR SLOW COOKING

• If you are slow cooking, you can use the BROWN/SEAR or SAUTÉ functions first to brown meats and sauté vegetables at the beginning. Browning meat prior to slow cooking not only gives your food great color, but it also seals in the juices and flavors and keeps the meat tender.
• When using the SLOW COOK function, make sure the Steam Release Valve is in the “Release” (open) position.
• When using the SLOW COOK function, the Multi-Cooker does not recover lost heat quickly, so only lift the Lid if necessary or if instructed to do so in the recipe. It’s a good idea to monitor your slow cooking results throughout the cooking cycle by quickly removing the Lid and checking, then quickly replacing the Lid. Different cuts and thickness of meats and vegetables can vary cooking times.
• It is not uncommon for meat to cook faster than root vegetables. It is for this reason that we recommend chopping all vegetables to a similar small size. Meat can be cut into larger chunks because if it is cut too small, it will break up once cooked and tenderized.
• Slow Cooking reduces evaporation, resulting in the flavors and juices being maintained. Keep this in mind when creating your own recipes, as you may not require as much liquid as you would when using other cooking methods, such as pressure cooking.

SERVICE INSTRUCTIONS

1. This Multi-Cooker has no user serviceable parts. Do NOT attempt to repair or adjust any electrical or mechanical functions on this Multi-Cooker. Doing so may cause injuries and void the warranty. Any servicing beyond that described in the CARE AND CLEANING section should be performed by an Authorized Service Representative only. See Warranty Section.
2. If you need to exchange the Multi-Cooker, please return it in its original carton, with a sales receipt, to the store where you purchased it. If you are returning the Multi-Cooker more than 30 days after the date of purchase, please see the enclosed Warranty.
3. If you have any questions or comments regarding this Multi-Cooker’s operation or believe any repair is necessary, please call our Consumer Service Department at 1-800-323-9519 or visit our website at www.crockpot.com.

1 YEAR LIMITED WARRANTY

Sunbeam Products, Inc. or if in Canada, Sunbeam Corporation (Canada) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. Sunbeam, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. Sunbeam dealers, service centers, or retail stores selling Sunbeam products do not have the right to alter, modify or any way change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than Sunbeam or an authorized Sunbeam service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on Sunbeam’s Liability?
Sunbeam shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. Sunbeam disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. Sunbeam shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party. Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.

How To Obtain Warranty Service

In the U.S.A.
If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-323-9519 and a convenient service center address will be provided to you.

In Canada
If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-323-9519
and a convenient service center address will be provided to you.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. Boca Raton, Florida 33431. In Canada, this warranty is
offered by Sunbeam Corporation (Canada) Limited located at 20B Hereford Street, Brampton, Ontario L6Y 0M1. If you
have any other problem or claim in connection with this product, please write to Consumer Service Department.

PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE. To register your product, please visit us online at www.crockpot.com.

© 2018 Sunbeam Products, Inc. All rights reserved. Distributed by Sunbeam Products, Inc. Boca Raton, Florida 33431.

Printed in China
8Qt Express Crock XL Multi-Cooker_18EM2

194505 Rev A
GCDS-CRP080518-SL

FAQS

What is the maximum fill line for the Crock Pot 8Qt Express Crock XL Multi- Cooker?

The maximum fill line is 2/3 full. When cooking foods that expand during cooking such as rice or dried vegetables, do not fill the unit beyond the recommended level at 1/2 full.

Can I use the Cooking Pot for food storage or place it in the freezer?

No, you cannot use the Cooking Pot for food storage or place it in the freezer.

Can I use alkaline cleaning agents when cleaning the Multi-Cooker?

No, you should not use alkaline cleaning agents when cleaning. Use a soft cloth and mild detergent.

Can I use the Crock Pot 8Qt Express Crock XL Multi-Cooker for pressure frying with oil?

No, you should not use this pressure cooker for pressure frying with oil.

Can I use an extension cord with the Crock Pot 8Qt Express Crock XL Multi- Cooker?

No, you should not use an extension cord with the Multi-Cooker.

Can I cook directly in the Heating Base?

No, you should not cook directly in the Heating Base. Cook only in the removable Cooking Pot provided.

What should I do if I receive an E6 Notification Code during the cooking cycle?

If you receive an E6 Notification Code during the cooking cycle, it means your recipe is too thick or doesn’t have enough liquid in it. Add more liquid to successfully build pressure.

How much liquid do I need to successfully build pressure in the Crock Pot 8Qt Express Crock XL Multi-Cooker?

One cup – or 8 oz – of liquid (it can be water, chicken broth, etc.) is usually enough liquid to successfully build pressure.

How do I use the time delay feature?

To use the time delay feature, press the Delay Start button and set the desired time delay using the + and – buttons. Press Start to begin the countdown.

HOW TO USE-VIDEO

Crock Pot 8Qt Express Crock XL Multi- Cooker Owner’s Manual – Optimized PDF
Crock Pot 8Qt Express Crock XL Multi- Cooker Owner’s Manual – Original PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>