GALLAGHER 3E3150 Hand Held Eid Tag Reader and Data Collector Hr5 User Manual
- May 15, 2024
- GALLAGHER
Table of Contents
GALLAGHER 3E3150 Hand Held Eid Tag Reader and Data Collector Hr5
Specifications
- Product Name: Hand Held EID Tag Reader & Data Collector (HR5)
- Manufacturer: Gallagher
- Website: www.gallagher.com
- Location: Private Bag 3026, Hamilton, New Zealand
Powering On/Off
To power on the HR5, press and hold the power button for 3 seconds. To power off, repeat the same process.
Reading EID Tags
Position the reader close to the EID tag and press the scan button to read the tag data.
Data Collection
Use the provided software to collect and manage data from scanned EID tags. Connect the HR5 to your computer using the USB cable for data transfer.
Maintenance
Regularly clean the reader with a soft, dry cloth. Avoid exposure to water or extreme temperatures.
Battery Charging
When the battery is low, connect the HR5 to a power source using the included charger. Allow sufficient time for a full charge before use.
PUBLISHED BY
Gallagher Group Limited
181 Kahikatea Drive, Private Bag 3026
Hamilton, New Zealand
www.gallagher.com
Copyright Gallagher Group Limited 2023
All rights reserved. Patents pending.
Gallagher HR5 Hand Held EID Tag Reader & Data Collector
User Manual 3E3183 – EdiƟ on 11 – January 2023
DISCLAIMER
Whilst every effort has been made to ensure accuracy, neither Gallagher Group Limited nor any employee of the company shall be liable on any ground whatsoever to any party in respect of decisions or actions they may make as a result of using this information. Under the Gallagher policy of continuing development, design and specifications are subject to change without notice. Developed and manufactured by Gallagher Group Limited, and ISO 9001 2000 Certified Supplier.