BEOK TOL47WIFI Tuya Smart Thermostat Heating Thermostat User Guide

BEOK TOL47WIFI Tuya Smart Thermostat Heating Thermostat

Product Information

Specifications

• Model: TOL47 WIFI Heating Thermostat
• Power Supply: 100 ~ 240V
• Current Load: 3A (water heating/gas boiler), 16A (electric heating)
• Power Consumption: Not specified
• External Material: Not specified
• Sensing Element: Not specified
• Set Temperature Range: Not specified
• Floor Set Temperature Range: Not specified
• Accuracy: Not specified
• Dimension: Not specified
• Ambient Temperature: Not specified
• Storage Temperature: Not specified
• Timing Error: Not specified

Product Usage Instructions

Installation

Follow the installation guide provided in the user manual to set up the TOL47 WiFi Heating Thermostat correctly.

Connecting to WiFi

Ensure your WiFi network is available and follow the instructions to connect the thermostat to your WiFi network.

Phone Control Setup

Download the compatible app on your IOS or Android device. Follow the app instructions to link your phone to the thermostat for remote control.

Temperature Control

Use the app on your phone to set and adjust the desired room temperature or floor heating system temperature.

Frequently Asked Questions

Q: Can I control multiple TOL47 WiFi Heating Thermostats with one phone?

A: Yes, you can control multiple thermostats individually with the app on your phone.

Q: Is it possible to schedule temperature changes with this thermostat?

A: Yes, you can set schedules for temperature changes through the app for automated control.

Q: What should I do if the thermostat is not connecting to my WiFi network?

A: Check your network settings and ensure the thermostat is within range of the WiFi signal. You may also try restarting both the thermostat and your router.

Product Summary:

TOL47 WiFi Heating Thermostat is WiFi button type thermostat with phone control. It is applied to temperature control of industrial, commercial and domestic room, and start of control heating appliances, especially floor heating systems. It can be controlled by phone. Phone systems are IOS and Android system optional.

Technical Parameter

≤16A(electric heating)

Power Consumption| <1W
External Material| PC+ABS (flame retardant）
Sensing Element| NTC
Set Temp. Range| 5-95℃
Floor Set Temp. Range| 5-60℃
Accuracy| ±1℃
Dimension| 86x90x14mm
Ambient Temp.| 0-45℃,5-95％RH(Non-condensing）
Storage Temp.| -5~55℃
Timing Error| <1％

Main Functions and Characteristics

1.  WIFI for Android & Apple iOS
2. Large screen display and button
3. Power-off memory function
4. Real-time data save function
5. 5+2 or 6+1or 7days six periods program schedule
6. Anti-freezing function
7. 3 sensor modes can be setting
8. Selectable 80mmx80mm European hidden box.
9. With child lock function

User Interface Explanation

User Interface Explanation

(Phone Port)

Model Spec

Wiring Diagram

Thermostat Operation Instruction

1. Setting Power on/off
   Press to turn on/off the power.

2. Setting Temperature
   Press to set the temperature.

3. Setting the Clock
   Long press to set minute, hour and week.
   Press or for adjusting.

4. Setting the Manual Mode.
   Manual mode means non-programmable mode.
   Press will display in the screen, it is in manual mode.
   Press to set the temperature.

5. Setting the Child Lock
   Long press to enter into child lock mode will display.
   Long press again, the child lock will disappear.

6. Setting the Programmable Mode.
   Press and hold into programmable mode. 12345 and time will display.
   12345 display in the position of week means 5+2;

   • Press to change the time.
   • Press to do the temperature adjustment.
   • Press to change the temperature;
   • Press to do the next period adjustment.
   • Press to exit and save

If you want to make temporary adjustment in any period, press , then will display. When finish the setting, all will confirm automatically.

Press to switch operation between manual mode and programmable mode.

Remark:
The defaulted temperature of period3 and period4 is the same as period2. Please change it according to the request.

Advanced Setting
In the state of power-off, press the key and the  key for 5 seconds to enter the advanced option setting.
Press to enter the next option, press to adjust, and press to exit.

2SEN

|

Sensor selection

| IN: Internal sensor OUT: Floor sensor

ALL: Both internal sensor and floor sensor

|

IN

3LIT| Modify the temp. limit| 5-60℃| 35℃
4DIF| Temp. difference start| 0.5-10℃| 1℃
5LTP| Antifreeze function| OFF：Close anti-frozen

ON：Open anti-frozen

| OFF

6PrG

| Weekly programming mode| 0: 7 days programmable

1: 6+1 programmable

2: 5+2 programmable

|

2

7rLE| Primary and secondary reverse selection| 00: close the main and

auxiliary  reversal 02: auxiliary reversal

| 00
8dLy| Passive linkage

output delay time

| 0-5min| 0
9HlT| Set upper temp. limit| 35-95℃| 60

RFAC

| Restore factory defaults| long press up button to adjust the display “—”, press power button to restore the factory settings|

–

Install APP on phone
For iOS system: Login in App Store, search “Tuya Smart”, you can download it on your iphone.
For Andriod system: Login in Google Paly, search “ Tuya Smart”, you can download it on your phone.
Or scan below code to download:

Register Account
If you do not have an APP account yet, you can choose to register or log in via SMS verification code. Click “Creat a new account”, you will enter the Tuya Smart Platform Privacy Policy page. After you click Agree, you will officially enter the mobile phone registration page.

The system automatically determines the current country/region. You can also select the country/region manually. After entering your mobile phone number or email address, click “get verification code”. Enter the received verification code, then enter the password, and click “Finish” to register successfully.

Add device
(Bluetooth connection)

1. Turn on the mobile phone’s Bluetooth, turn the device on and enter the Tuya APP. Click “Add Device” or “+” on the top right of the APP homepage to enter the “Add Device” page. It will prompt: find the device to be added (Figure 2) and follow the prompts.
2. Automatic discovery”: Search for devices (Figure 3), and add widgets as prompted on the phone page.

(WIFI connection)

• When the thermostat is turned on, press and hold the button for 5
• Now, the WIFI icon flashes (slow flashing), and the thermostat enters the status of code matching.
• Find the temperature control product (Bluetooth + WIFI model) in the “small household appliances. In the specific network configuration mode, click the configuration button on the page, select the WIFI that can connect to the Internet in the working area of the device, and enter it.
• WIFI password, click “Next”, click according to the page prompt (Figure 2), “Go to Connect”, and follow the instructions to find the prompt content (Figure 3), click “Prompt content ” and return to the Tuya APP to enter the network configuration process.

In that case, the APP for the network configuration process is show
(Figure 1), and the network configuration successfully display the interface (Figure 2).
The device’s name with successful network configuration can be modified and the room’s location can be selected.

If the distribution network fails, the APP will display the page shown in the figure below. You can choose to add or view the help again.
Note: if the connection fails, please confirm whether the temperature control device has entered the code matching state.

Thermostat APP interface display

Installation Instruction

This product is suitable for standard 80*80mm wall box and 60 mm european round box.

1. Connect the power box according to the wiring diagram.
2. Separate the power supply from the control board cable.
3. Screw the power supply into the box of 86.
4. Connect the power board to the board line, and align the buckle at 30 degrees to complete the installation.

ATT

Thank you for buying this product!
Please read this manual for complete instructions on installing and operating your thermostat. If you require further assistance, please feel free to contact us.

In the box you will find

Our Service:
We offer the warranty of 24 months from the sales day.
During the warranty, if it belongs to a quality issue, we will fix or replace them for you by free after test them.
If it is not quality problem or beyond the warranty time, we will charge for the after-sales service.

Warning:
The symbol means the unit is being installed, it may cause electrical shock hazard during maintaining, so please make sure it is operated by the professional technical worker.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>