BEOK TS4 Series Wi-Fi Touch Screen Thermostat User Manual
- May 15, 2024
- BEOK
Table of Contents
- BEOK TS4 Series Wi-Fi Touch Screen Thermostat
- Product Usage Instructions:
- TS4 SERIES WIFI TOUCH SCREEN THERMOSTAT
- Product packaging
- Electrical Specifications:
- User Instructions
- Icon Description
- Time programming instructions
- About WIFI connection
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BEOK TS4 Series Wi-Fi Touch Screen Thermostat
Specifications:
- Product Name: TS4 SERIES WIFI TOUCH SCREEN THERMOSTAT
- Compatibility: WP (water heating), EP (electric heating), WPB (gas boiler)
Product Usage Instructions:
Mounting Steps:
- Choose a suitable location on the wall for mounting the thermostat.
- Use the provided screws and anchors to securely attach the thermostat to the wall.
- Ensure the thermostat is level and stable before proceeding.
Icon Description:
The thermostat icons may include symbols for temperature, mode settings,
fan control, and more. Refer to the user manual for a detailed explanation of
each icon.
Operation Guide:
To operate the thermostat, use the touchscreen interface to adjust the
temperature settings, select heating modes (WP, EP, WPB), set timers, and
customize preferences.
Advanced Option Setting:
For advanced settings such as calibration, system diagnostics, and energy-
saving features, access the settings menu on the thermostat and follow the on-
screen instructions.
About WIFI Connection:
To connect the thermostat to WIFI for remote access and control, follow the
WIFI setup instructions provided in the user manual. Ensure a stable WIFI
connection for optimal performance.
FAQ:
-
Q: How do I reset the thermostat to factory settings?
A: To reset the thermostat to factory settings, locate the reset button on the device or access the reset option in the settings menu. Follow the prompts to confirm the reset. -
Q: Can I schedule temperature changes with this thermostat?
A: Yes, you can schedule temperature changes by setting up timers in the thermostat’s programming menu. Refer to the user manual for detailed instructions on programming schedules.
TS4 SERIES WIFI TOUCH SCREEN THERMOSTAT
This thermostat is used for water heating, electric heating, or gas boiler.
Welcome
Thank you for your trust and support. By adopting higher-end technology and
more perfect technology, your new thermostat will provide you with the right
temperature environment every day in the future, making your life more
comfortable and your living environment more stylish and beautiful. For
detailed instructions on the installation and use of this thermostat, please
read this manual carefully. Please contact a professional to install the
thermostat for you and install and use the product to the extent permitted by
law.
Application
Intelligent digital temperature controller is a floor heating system suitable
for room temperature control and household temperature control. It controls
the operating state of the floor heating equipment by comparing the ambient
temperature with the set temperature, which improves comfort and achieves
energy saving. This digital temperature controller adopts microcomputer
control technology and is equipped with full-screen display touch buttons,
which is elegant in design and easy to use. The thermostat has manual
automatic, programmable and state memory functions.
Product packaging
- Thermostat host – 1PC
- Certificate of conformity – 2PCS
- Sensing line (optional) – 1PC
Product parameters
- Water heating 3А;
- Electric heating 16A
- Linkage; M:Gas boiler 3A
Electrical Specifications:
- Temperature Sensor: NTC
- Temperature accuracy: 1°C
- Display screen: LCD
- Working environment: -5-50°C
- Self-consumption power: < 1W
- Temperature setting: 5 ~60°C
- Display range: 0-51°C
- Load current: water heater 3A
- electric heater 16A
- gas boiler heater 3A
- Voltage: AC100-240V, 50/60Hz
User Instructions
- Read this manual carefully. A general operation may damage the product or cause a dangerous situation.
- The installation personnel must be well-trained and experienced service technicians.
- After the installation is complete, please close this manual carefully and operate this product following the user guide.
Note: There is a risk of electric shock or equipment damage.
Wiring Diagram
Note: WP for water heating; EP for electric heating; WPB for gas boiler
Mounting steps
- Connect the power box according to the wiring diagram
- Separate the power supply from the control hoard cable
- Screw the power supply into the box of 86
- Connect the power board to the control board line, and align the buckle at 30 degrees to complete the installation.
Icon Description
Icon description
- Power on/off: press the key to turn on/off the thermostat.
- Press the M key to switch between manual and automatic modes.
- In the automatic mode, press the ^ key or key to adjust the temperature, and it will enter the automatic mode, which only runs for a while.
- Press the & key to enter the clock setting, press the mode key M to switch the setting options, and press the ^ and keys to adjust each parameter value.
- Simultaneously press and hold the and keys for 5 seconds to add or cancel the child lock.
- WIFI link: When the thermostat is turned on, press and hold the ^ button for eight or five seconds, the WIFI icon flashes on the thermostat display, and the thermostat enters the code matching state.
Time programming instructions
Long press the M key to enter the programming setting, short press the M key to switch options, press the key to adjust the parameters of each option, and press the U key to exit and save mode.
Advanced Option Setting
In the shutdown state, press the M key and key.
Press for 5 seconds to enter the advanced option setting Press the M key to
enter thenext option, then press the ^ and key to adjust options, and press
the U key to exit the advanced option setting mode.
About WIFI connection
Before using the WIFI temperature controller for the first time, you must set the WIFI value number and configuration via your smartphone or tablet, which will allow communication between your connected devices.
WIFI connection: When the thermostat is turned on, press and hold the up
button for 5 seconds, the WIFI icon flashes on the thermostat display, and the
thermostat enters the code matching state.
WIFI connection: Bluetooth thermostat, please turn on the phone’s
Bluetooth
APP download
Search for “Tuya Smart” in each APP market or scan the following QR code to
download this software:
Register an account
If you do not have an APP account, you can choose to register or log in via
SMS verification code. Cl ick “Create New Account” to enter the privacy policy
page of Tuya Smart Platform. After clicking Agree, you will formally join the
registration page of your mobile phone number.
The system automatically determines the current country/region, nu you can manually select the country/region enter your phone Enter the received verification code. Then enter the password. Click “Finish” to register successfully.
Add device
-
(Bluetooth connection) Turn on the mobile phone’s Bluetooth, turn the device on, and enter the Tuya APP. Click “Add Device” or “+” on the top right of the APP homepage, and enter the “Add Device” interface. It will prompt: find the device to be added (Figure 2) and follow the prompts.
-
“Automatic discovery”: Search for devices (Figure 3), and add widgets as prompted on the phone page
-
(WIFI connection) When the thermostat is turned on, press and hold the up button for 5 seconds, the thermostat display will show Now the WIFI icon flashes (slow flashing), and the thermostat enters the status of code matching. Find the temperature control product (Bluetooth + WIFI model) in the (small household appliances). In the specified network configuration mode, click the confirmation button on the page, select the WIFI that can connect to the Internet in the working area of the device, and enter it. WIFI password, click Next, click according to the page prompt (Figure 2), “Go to connect,” and follow the instructions to find the prompt content (Figure 3), click “Prompt content” and then return to the Tuya APP to enter the network configuration process.
In that case, the APP for the network configuration process is shown in Figure 1, and the network configuration successfully displays the interface shown in Figure 2. The device’s name with successful network configuration can be modified, and the room’s location can also be selected.- If the network configuration fails, the APP will display the page as shown in the figure below, and you can choose to add it again or view the help.
Note : Please confirm whether the thermostat enters the code matching state if the connection fails.
- If the network configuration fails, the APP will display the page as shown in the figure below, and you can choose to add it again or view the help.
-
Thermostat APP interface display