BEOK TCB38WIFI Color TFT-LCD Heating Thermostat User Manual
- May 15, 2024
- BEOK
Table of Contents
BEOK TCB38WIFI Color TFT-LCD Heating Thermostat
Product Information
Specifications
- Model: Color TFT-LCD Heating Thermostat
- Power Supply: 200-240V, 50-60Hz
- Current Load: 3A (water heating), 16A (electric heating)
- Power Consumption: Not specified
- External Material: Not specified
- Sensing Element: Not specified
- Set Temp. Range: Not specified
- Floor Set Temp. Range: Not specified
- Accuracy: Not specified
- Dimension: Not specified
- Ambient Temp.: Not specified
- Storage Temp.: Not specified
- Timing Error: Not specified
Product Usage Instructions
Installation
Follow the installation instructions provided in the user manual to mount
and connect the thermostat correctly.
Setup
Configure the thermostat settings using the color TFT-LCD display or
through the phone app for remote control.
Temperature Control
Set the desired temperature range for the room and floor heating systems to
ensure optimal comfort.
Phone Control
Download and install the compatible app on your iOS or Android device to
control the thermostat remotely.
Maintenance
Regularly check and calibrate the thermostat to maintain accurate
temperature control.
Frequently Asked Questions (FAQ)
-
Q: Can this thermostat be used for both commercial and domestic applications?
A: Yes, this thermostat is suitable for temperature control in industrial, commercial, and domestic settings. -
Q: How can I reset the thermostat if needed?
A: Refer to the user manual for instructions on resetting the thermostat to default settings. -
Q: Is it possible to program a schedule for temperature adjustments?
A: Yes, you can set up a schedule for automatic temperature adjustments using the thermostat’s programming features.
COLOR TFT-LCD HEATING THERMOSTAT
Product Summary:
Color TFT-LCD Heating Thermostat is WIFI touch screen thermostat with phone
control. It is applied to temperature control of industrial, commercial and
domestic room, and start of control heating appliances, especially floor
heating systems. It can be controlled by phone. Phone systems are IOS and
Android system optional.
Technical Parameter
| Power Supply | 200 ~ 240V 50 ~60Hz |
|---|---|
| Current Load | ≤3A (water heating) |
≤16A (electric heating)
Power Consumption| <0.3W
External Material| PC+ABS (Flame Retardant）
Sensing Element| NTC
Set Temp. Range| 5-60℃
Floor Set Temp. Range| 5-99℃
Accuracy| ±1℃
Dimension| 86x86x13.3mm
Ambient Temp.| 0-45℃,5-95％RH(Non-condensing）
Storage Temp.| -5~55℃
Timing Error| <1％
Main Functions and Characteristics
- WIFI for Android & Apple iOS
- Large screen display and touch button
- Power-off memory function
- Real-time data save function
- 5+2 or 6+1or 7days six periods program schedule
- Anti-freezing function
- 3 sensor modes can be setting
- Selectable 80mmx80mm European hidden box.
- With child lock function
User Interface Explanation(Thermostat Port)
User Interface Explanation(Phone Port)
Model Spec
| | | Week Program| Controlled Objects
---|---|---|---|---
XXX-EP| 16A| √| √| For electric heating appliances
XXX-WP| 3A| | √| For water heating appliances
XXX-WPB| 3A| | √| For gas boiler
Wiring Diagram
Thermostat Operation Instruction
Main key instruction
- ON/OFF key
- Mode Key : Switch between Manual mode, Auto mode, Temporary manual mode. Long press to enter period setting
- Time key: Hour, minute and week setting.
- Up key: To increase temperature.
- Down key : To reduce temperature.
Set up child locks
- Long press to enter into child lock mode, will display.
- Long press again, the child lock will be disappeared.
Turn off the backlight mode by turning off the lights
When turning on or off, press the time button and down button simultaneously to enter the green light energy-saving mode. The thermostat is working normally, but there will be a faint display.
Setting the clock
- Press the key to display the week, hour, and minute (as shown in the left figure).
- Press the key to select week, hour, and minute. Press the keys to set the correct time.
Setting the programmable mode
Press and hold key for 5 seconds when the thermostat is turned on, and the screen will display “Loop” to set the desired time and time period temperature. “Loop” represents a week’s working and rest day cycle control mode. Repeat the operation “ “ to move the cursor to select the set time and time period temperature. to set the time and Press time period temperature parameters.
The working day is divided into six time periods, and the rest day is divided into two time periods. The time period parameters in the graph are the default parameters at the factory.
Advanced settings (recommended for professional operation)
- When shutting down, press first and then to enter advanced settings
- Press the key to move the cursor and select the setting parameters.
(Press the key to take effect)
Remark
Deadzone for floor temp.: i.e. the setting Deadzone for floor sensor is 2, Out
Set temp. is 42℃, when actual temp. reach 44℃, the relay will stop working;
when actual temp. is back to 40℃, the relay starts working again. It works
when room temp. is lower than set temp.
Sensor error:
Please select the right sensor mode. If select the different mode or there is
error of sensor, “Ext sensor dropped” will display on the LCD screen, the
thermostat will stop heating till the problem is solved.
- Language: English/Chinese
- In / Out (Ext Sensor) / In and Out 5-99℃
- 1-9℃ (Ext Sensor)
- 5-99℃
- 5-99℃
- 0-5℃
- Disable/Enable
- always off/keep last status 0.5-3.0℃
- Positive/Negative
- FAC=0 Restore factory settings
Phone Port Operation Instruction
Install APP on phone
For iOS system: Login in App Store, search “ Beok Home”, you can download it
on your iPhone.
Or scan below code to download
For Android System: Login in Google Play, search “Beok Home”, you can download
it on your phone.
Or scan below code to download
Connection Thermostat with phone
Thermostat Setting
In power off state : Long press the Up key for 10 seconds.
Start WIFI configuration : When the WIFI icon and EasyConfig are displayed on the screen, WIFI configuration can be used.
Easyconfig: network distribution can begin.
Connecting: the phone is connected normally.
Connected: distribution network complete.
Connect the distribution network to the WIFI branch server cloud.
AP Config : AP thermostat hotspot configuration (operate FAC=12 in
advanced settings).
Connection with Phone
Open Beok Home APP on your phone, you can see APP welcome page.
When the WIFI icon and EasyConfig are displayed on the screen, you can start
the configure on your phone.
Enter your WiFi name and password, then start connection a t below. When connection success, it will appear “Connection Success”.
After connection success, you need press “Search “ key.
Then it will appear your Wi-Fi thermostat HVAC. HVAC is the factory setting name, when you have more than 2 thermostats, you can change it to any name you want.
- Long press HVAC for 5 seconds, it will appear Edit Thermostat page.
- Press Modify Current Thermostat.
- You can change HVAC to room 1, Bedroom Bath room, or anything you like.
APP Interface on the Phone
Thermostat Setting through Phone Operation
-
Clock : You can press Time Matching switch to match your phone clock with thermostat clock.
-
Children lock (screen locking) : Press to lock the thermostat.
-
Anti-Freezing: Press thermostat will show on the screen , it means Anti-freezing function open.
-
Temperature setting: You can directly drag the pointer on Temperature Setting Dial to set temperature. Or press to set temperature step.
-
Period setting: Long press Period Display , then you will go into the Period Setting mode: Touch work loop: you can choose the week program mode: 5+2/ 6+1 /7. Touch each time value: you can set the time of the period.
Touch each temperature: you can set the temperature of the period. Notice: When you choose the program mode to 7, Weekend program data set will no appear. -
Advanced Setting: Long Press Senior , you will go into Advanced setting mode:
Display Code| Function| Setting And Options| Factory
Default
---|---|---|---
SEN| Sensor mode| In-s control Out-s control
In-s control., Out-s limit| In-s control
OSV| Floor set temp. range| 5-99℃| 42℃
DIF| Floor temp. ctrl diff| 1-9℃| 2℃
SVH| Room temp set max| 5-99℃| 35℃
SVL| Room temp set min| 5-99℃| 5℃
ADJ| Room temp. adjust| -5-5℃| 0℃
FRE| Anti-frozen| close/open| Close
PON| Power memory| off/on| On
- Switch of Manual mode and Auto mode: Press to switch manual mode or Auto mode.
- Power off : Press to turn on or off thermostat.
Attention to Phone Wi-Fi Connection
- After you press Configure, if connection fails:
- Please confirm your mobile phone is set to WLAN mode, and ensure its (mobile data)3g/4g is turned off. Please connect to 2.4G Wi-Fi, not 5G Wi-Fi.
- Please add your Wi-Fi router name, we recommend it does not include spaces or Chinese symbol.
- Please check your Wi-Fi router password. We recommend not over 32 characters, no spaces, no blank password, no special symbols except letters and numbers.
- AP config: AP thermostat hotspot configuration (operate FAC=12 in advanced settings).
- Please confirm Wi-Fi password is correctly filled. We recommend you check password to be visible when it is input.
- If it displays the following reminder, please go to Advanced Setting to reset corresponding setting.
Installation Instruction
This product is suitable for standard 80*80mm wall box and 60 mm European
round box.
- Open the main control board as shown in the figure, press the power part of the thermostat, gently lift it up, and separate it from the mounting board hook.
- Connect the wires correctly according to the wiring diagram and secure the rear cover to the mounting plate with M4 screws
- Connect the lower cover cable to the upper cover.
- Insert the back into the four hooks of the mounting plate. Gently press down on the thermostat to lock the front housing and complete installation
NOTICE : The installation wire should be 1.5-2.5mm2.
XII. ATT
Thank you for buying this product!
Please read this manual for complete instructions on installing and operating
your thermostat. If you require further assistance, please feel free to
contact us.
In the box you will find
| Model | XXX-EP | XXX-WP | XXX-WPB |
|---|---|---|---|
| Thermostat | √ | √ | √ |
| User Manual | √ | √ | √ |
| Screws | √ | √ | **** √ |
| External sensor | √ |
Our Service
We offer the warranty of 24 months from the sales day.
During the warranty, if it is belong to the quality issue, we will fix or
replace them for you by free after test them.
If it is not quality problem or beyond the warranty time, we will charge for
the after-sales service.
Warning
The symbol means the unit is being installed, it may cause electrical shock
hazard during maintaining, so please make sure it is operated hu the
professional technical worker