MEAN WELL XLG-100 Series 100W Constant Power Mode LED Driver Owner’s Manual

: May 15, 2024
: MEAN WELL

100W Cons tant Power Mode LED Driver
XLG-10 0 series

XLG-100 Series 100W Constant Power Mode LED Driver

http://www.meanwell.com.cn/Upload/PDF/LED_EN.pdf

Features

Wide input range 100~305VAC( Class I )
Full power output at 70~100% Constant power mode operation
Metal case with IP67, suitable for outdoor application
LVLE(H type),Class 2(24V)power unit
Surge protection with 6KV/4KV (10KV/6KV optional)
3 in 1 dimming function (Dim to off and Isolation design)
India (EESL) version with Input Over Voltage Protection can survive input voltage stress of 440Vac for 48 hours
Protection functions: OVP/SCP/OCP/OTP
Comply with UL Class P
Life time >50,000 hrs. and 5 years warranty

Applications

Skyscraper lighting
Street lighting
Floodlight Lighting
Stage lighting
Fishing lighting
Horticulture lighting
Bay lighting
DMX power supply
Type HL for use in class I , Division 2

GTIN CODE

MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

XLG-100 series is a 100W LED AC/DC driver featuring the constant power mode.XLG-100 operates from 100~305VAC and offers models with different rated current ranging between 700mA and 8000mA.
Thanks to the high efficiency up to 92%, with the fanless design, the entire series is able to operate for – 40°C ~+90’°C case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover the innovative environment-adaptive capability allows this series to reliably light on the LEDs for all kinds of application environments in almost any spots that may install LED luminaires in the world. XLG-100 series comply
with the latest version of IEC61347/GB19510.1 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both user and luminaire system during installation.

Model Encoding

Type	Function	Note
Blank	lo and Vo fixed. (For harsh environment)	By request
A	lo adjustable via built-in potentiometer	ln Stock
AB	lo adjustable via built-in potentiometer +3 in 1 dimming function
(0~10Vdc, 10V PWM signal and resistance)	ln Stock

Note:

12V and 24V models without the AB type
lndia version needs MOQ for production, please consult MEANWELL for detail

SPECIFICATION

MODEL	XLG-100 -12-	XLG-100 -24-
OUTPUT	DC VOLTAGE	12V
CONSTANT CURRENT REGION Note.2	8.4~ 12V	16.8~ 24V
RATED CURRENT (Default)	8A	4A
RATED POWER	96W	96W
RIPPLE & NOISE (max.) Note.3	150mVp-p	240mVp-p
CURRENT ADJ RANGE	Adjustable for A-Type only (via the built-in potentiometer)
4 ~ 8A	2~4A
VOLTAGE TOLERANCE Note.4	±3.0%	±2.0%
LINE REGULATION	±0.5%	±0.5%
LOAD REGULATION	±2%	±1%
SETUP, RISE TIME Note.6	500ms, 100ms/230VAC, 1200ms, 100ms/115VAC
HOLD UP TIME (Typ.)	12ms/ 230VAC 12ms/ 115VAC
INPUT	VOLTAGE RANGE Note.5	100 ~ 305VAC 142 ~ 431VDC (Please

refer to “STATIC CHARACTERISTIC” section)
FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR| PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
TOTAL HARMONIC DISTORTION| THD< 10%(@load¾50%/115VC,230VAC; @load¾75%/277VAC)
EFFICIENCY (Typ.)| 92%| 92%
AC CURRENT| 1.1A / 115VAC 0.5A / 230VAC 0.42A/277VAC
INRUSH CURRENT(Typ.)| COLD START 50A(twidth=300μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER| 8units (circuit breaker of type B) / 14 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.75mA / 277VAC
NO LOAD POWER CONSUMPTION| No load power consumption <0.5W(for standard version)
PROTECTION| OVER CURRENT| 95 ~ 108%
Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT| Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE| 13.5 ~ 18V| 27 ~ 34V
Shut down output voltage, re-power on to recover
INPUT OVER VOLTAGE Note.7| 320 ~ 390VAC (Shut down output voltage when the input voltage exceeds protection voltage, recovers automatically after fault condition is removed)
Can survive input voltage stress of 440Vac for 48 hours
OVER TEMPERATURE| Shut down output voltage, re-power on to recover
ENVIRONMENT| WORKING TEMP.| Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.| Tcase=+90℃
WORKING HUMIDITY| 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 60℃)
VIBRATION| 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
EMC SAFETY &| SAFETY STANDARDS Note.7| UL8750(type”HL”), UL879, CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384; GB19510.1,GB19510.14;EAC TP TC 004;J61347-1(H29), J61347-2-13(H29),KC61347-1,KC61347-2-13,
IS15885(Part2/Sec13)(for XLG-100I type only);NOM-058-SCFI-2017(except for Blank type); IP67 approved
WITHSTAND VOLTAGE| I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Parameter| Standard| Test Level/Note
Conducted| BS EN/EN55015(CISPR15) ,GB/T17743| ……
Radiated| BS EN/EN55015(CISPR15) ,GB/T17743| ……
Harmonic Current| BS EN/EN61000-3-2 , GB/T17625.1| Class C @load≥50%
Voltage Flicker| BS EN/EN61000-3-3| ……..
EMC IMMUNITY| BS EN/EN61547
Parameter| Standard| Test Level/Note
ESD| BS EN/EN61000-4-2| Level 3, 8KV air ; Level 2, 4KV contact
Radiated| BS EN/EN61000-4-3| Level 3
EFT/Burst| BS EN/EN61000-4-4| Level 3
Surge| BS EN/EN61000-4-5| 4KV/Line-Line 6KV/Line-Earth(6K/10K option)
Conducted| BS EN/EN61000-4-6| Level 3
Magnetic Field| BS EN/EN61000-4-8| Level 4
Voltage Dips and Interruptions| BS EN/EN61000-4-11| >95% dip 0.5 periods, 30% dip 25 periods,

95% interruptions 250 periods
OTHERS| MTBF| 2782.6K hrs min. Telcordia SR-332 (Bellcore) ; 276.4Khrs min. MIL-HDBK-217F (25℃)
DIMENSION| 1406332mm (LWH)
PACKING| 0.58Kg;24pcs /15Kg /0.85CUFT
NOTE| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃of ambient temperature.
2. Please refer to “DRlVlNG METHODS OF LED MODULE”.3. Rippl
e & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. De-rating may be needed under low input voltages. Please refer to “STATlC CHARACTERlSTlC” sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. lnput voltage only for XLG-100 l series, and l series without UL/CSA certificate.
8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
10. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com
11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80℃or less.
12. Products sourced from the Americas regions may not have the PSE/CCC/BlS/KC logo. Please contact your MEAN WELL sales for more information.
13. For any application note and lP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
14. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains.
15. lf you need the NOM (Mexico) certificate, Please contact MEAN WELL sales representative for details.
※Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
File Name:XLG-100-SPEC 2023-09-08
MODEL| XLG-100 -L- | XLG- 100 -H-
---|---|---
OUTPUT| RATED CURRENT (Default)| 700mA| 2100mA
RATED POWER| 100W| 100W
CONSTANT CURRENT REGION| 71 ~ 142V| 27 ~ 56V
FULL POWER CURRENT RANGE| 700~1050mA| 1750~2780mA
OPEN CIRCUIT VOLTAGE (max.)| 149V| 60V
CURRENT ADJ. RANGE| 350~1050mA| 875~2780mA
CURRENT RIPPLE| 3.0%(@rated current)
CURRENT TOLERANCE| ±5%
SET UP TIME| 500ms/230VAC, 1200ms/115VAC
INPUT| VOLTAGE RANGE Note.5| 100 ~ 305VAC 142VDC ~ 431VDC
(Please refer to “STATIC CHARACTERISTIC” ang “ DRIVING METHODS OF LED MODULE” section)
FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR (Typ.)| PF≧0.97 / 115VAC, PF≧0.95 / 230VAC, PF≧0.92 / 277VAC at full load (Please refer to “Power Factor Characteristic” section)
TOTAL HARMONIC DISTORTION| THD< 10% (@ load≧50% at 115VAC/230VAC ,@load≧75% at 277VAC) Please refer to “TOTAL HARMONIC DISTORTION (THD)” section
EFFICIENCY (Typ.)| 92.5%| 91%
AC CURRENT (Typ.)| 1.1A / 115VAC0.5A / 230VAC 0.42A / 277VAC
INRUSH CURRENT(Typ.)| COLD START 50A(twidth=300μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. NO. of PSUs on 16A CIRCUIT BREAKER| 8 unit(circuit breaker of type B) / 14 units(circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.75mA / 277VAC
STANDBY POWER CONSUMPTION| Standby power consumption <0.5W for AB-Type(Dimming OFF)(for standard version)
PROTECTION| OVER POWER| 105 ~ 150%
Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT| Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE| 160 ~ 220V| 66 ~ 90V
Shut down output voltage, re-power on to recover
INPUT OVER VOLTAGE
Note.7| 320 ~ 390VAC (Shut down output voltage when the input voltage exceeds protection voltage, recovers automatically after fault condition is removed)
Can survive input voltage stress of 440Vac for 48 hours
OVER TEMPERATURE| Shut down output voltage, re-power on to recover
ENVIRONMENT| WORKING TEMP.| Tcase=-40 ~ +90℃(Please refer to “OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.| Tcase=+90℃
WORKING HUMIDITY| 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +80℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 60℃)
VIBRATION| 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC| SAFETY STANDARDS Note.7| UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384; GB19510.1,GB19510.14; EAC TP TC 004;J61347-1(H29), J61347-2-13(H29),KC61347-1,KC61347-2-13,IS15885(Part2/Sec13)(for XLG-100I type only);NOM-058-SCFI-2017(except for Blank type); IP67 approved
WITHSTAND VOLTAGE| I/P-O/P:3.75KVACI/P-FG:2KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Parameter| Standard| Test Level/Note
Conducted| BS EN/EN55015(CISPR15) ,GB/T17743| …….
Radiated| BS EN/EN55015(CISPR15) ,GB/T17743| ……..
Harmonic Current| BS EN/EN61000-3-2 ,GB/T17625.1| Class C@load≥50%
Voltage Flicker| BS EN/EN61000-3-3| …….
EMC IMMUNITY| BS EN/EN61547
Parameter| Standard| Test Level/Note
ESD| BS EN/EN61000-4-2| Level 3, 8KV air ; Level 2, 4KV contact
Radiated| BS EN/EN61000-4-3| Level 3
EFT/Burst| BS EN/EN61000-4-4| Level 3
Surge| BS EN/EN61000-4-5| 4KV/Line-Line 6KV/Line-Earth(6K/10K option)
Conducted| BS EN/EN61000-4-6| Level 3
Magnetic Field| BS EN/EN61000-4-8| Level 4
Voltage Dips and Interruptions| BS EN/EN61000-4-11| >95% dip 0.5 periods, 30% dip 25 periods,
95% interruptions 250 periods
OTHERS| MTBF| 2782.6K hrs min.Telcordia SR-332 (Bellcore) ; 276.4Khrs min .MIL-HDBK-217F (25℃)
DIMENSION| 1406332mm (LWH)
PACKING| 0.58Kg;24pcs /15Kg /0.85CUFT
NOTE| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃of ambient temperature.
2. Please refer to “DRlVlNG METHODS OF LED MODULE”.
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. De-rating may be needed under low input voltages. Please refer to “STATlC CHARACTERlSTlC” sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. lnput voltage only for XLG-100 l series, and l series without UL/CSA certificate.
8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
10. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com
11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80℃or less.
12. Products sourced from the Americas regions may not have the PSE/CCC/BlS/KC logo. Please contact your MEAN WELL sales for more information.
13. For any application note and lP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
14. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains.
15. lf you need the NOM (Mexico) certificate, Please contact MEAN WELL sales representative for details.
※ Product Liability Disclaimer：
For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
File Name:XLG-100-SPEC 2023-09-08

BLOCK DIAGRAM

PFC fosc : 50~120KHz
PWM fosc : 60~130KHz

DRIVING METHODS OF LED MODULE

※ -I V Operating Area

XLG – 100-12,24
※ This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

DIMMING OPERATION

※ 3 in 1 dimming function (for AB-Type)

Output constant current level can be adjusted by applying one of the three methodo logies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance.
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
Dimming source current from power supply: 100μ A (typ.)

Applying additive 0~10VDC

Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): Applying additive resistance: Note :

Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.

OUTPUT LOAD vs TEMPERATURE

If XLG-100 operates in Constant Current mode with the rated current the maximum workable Ta is 60 (Typ. 230VAC) or 50 (Typ.100VAC)℃℃
Below 110VAC@ -30 may retry to 2nd setup℃