Zevluck WLA2301-1BLK 1 Light Wall Sconce Instruction Manual
- May 15, 2024
- Zevluck
Table of Contents
WLA2301-1BLK Installation &
Wiring Instruction
Assembly Instruction
- Carefully unpack the fixture and all components.
- Disconnect powder from the main power distribution board before installation.
- Detach MOUNTING STRAP from BACKPLATE by removing the FINIAL.
- Route power cord, attach MOUNTING STRAP to J-BOX, and secure MOUNTING STRAP with PANHEAD SCREW.
- Connect wire. Twist lamp wire ends and powder wires together: black wire to black wire(hot wire), white wire to white wire(neutral wire), screw on the WIRE NUT, making sure the conductors are not exposed. Connect ground wire to MOUNTING STRAP by using the green hex GROUND SCREW.
- Carefully tuck the wires and WIRE NUTS into J-BOX, attach BACKPLATE onto MOUNTING STRAP and fasten by FINIAL, then make sure that the lamp fixture is secure on the wall.
- Removing SOCKET RING from socket, place the GLASS SHADE onto socket, then screw the SOCKET RING onto socket, making sure that the GLASS SHADE is secure on the lamp fixture.
- Install bulb into socket, recommend E26 60W MAX bulb (bulb not included).
AFTER SALES SERVICES EMAILS: Zevluck@163.com
WARNING : TURN THE POWER OFF (UNPLUG FROM THE WALL OUTLET) BEFORE
REPLACING THE BULB. MAKE SURE THE BULB HAS SUFFICIENT TIME TO COOL DOWN. DO
NOT SUBJECT THE LAMP TO ANY SHOCK WHILE LIT AS SHATTERING OF LAMP MAY RESULT.
Alecchi Lighting Co., Limited—P R O F E S S I O N A L I N S T R U C T I O N
Read User Manual Online (PDF format)
Loading......