KINGSYARD KYGL230CP Solar Pathway Lights Outdoor 2 Pack User Manual

KINGSYARD KYGL230CP Solar Pathway Lights Outdoor 2 Pack User Manual

Product Feature

Product Structure

How to insert into the ground correctly?

Note

Please keep the solar panel away from any shade of house and trees.
Make sure there are no any obstructions on the solar panel like

Light Modes

Push the power switch to power on the lights and change the light  modes
Mode 1: Constant light in cool white/warm white(depends on the type you purchased)
Mode 2: Color changing dynamic lights in 7 colors
Mode 3: Turn off

Notice

Please make sure the plastic film and the insulator tab has been removed before use.It is recommended to turn on the switch before using It for the first time and charge it for 1 day under direct sunlight. Make sure
that the product has enough power. If you want to check whether the product can work normally or not, please turn it on by pressing the power switch , then cover the solar panel with your hands in the daytime or put it in a dark
environment. Loosen the soil and make sure the lawn is not too hard before the installation. If the brightness of the lights gets lower in the process of use, it means that the product is under the low battery status which is a
normal phenomenon. The lights will return to high brightness after fully charged.

QA

1. How to choose a right location?
   Install the solar lights in a location with full, direct sunlight. Ensurethe location is away from other light sources such as street orporch lamps. These sources may interfere with the dark sensor of the lights and prevent them from turning on automatically.

2.  How long do these solar lights work?
   The electricity stored during the day. The operating time of our lights depends on geographical location, daily weather conditions and season. For optimum performance, these lights can last for 10-20 hours after fully charged

3. The solar light does not turn on at night.
   Check if the plastic film on the solar panel has been removed. @ Twist off the lampshade, check if the insulator tab has been peeled off.
   Check if the power switch is on. @ The lights are too close to other light sources or to each other. Relocate the solar light or eliminate the other light sources. ® The battery is not fully charged. Install the solar light in an area
   where it can receive the maximum amount of full, direct sunlight.
   The battery is damaged. Contact our customer service to ask for the replacement.

4.  My light doesn’t work after being used a few days or months.
   What happened?

5.  The built-in battery is out of power, 5o you need to charge itunder direct sunlight where there is no shade or eave that may shelter the solar panel.

customer ser e Informa

We promise that any products from our brands are 100% satisfaction guaranteed and any customer gets the ideal solution for their
problem. So if you have any issues about our product or service, please feel free to contact us at cs@e.kingsyard.com any message will get replied in 24 hours.

Specifications

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>